Rural Development Government Departments Closing in 0 days TDR #24421797

Special Repairs To Water Supply Scheme At Lambori G . P Lambori Tah-Jiwati

Issued by Government Departments · Jiwati, Maharashtra
Tender Value
9.74 Lakhs
Estimated cost
Bid Submission
03 Jun 2020
0 days left
EMD
9800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Jiwati → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Special Repairs To Water Supply Scheme At Lambori G . P Lambori Tah-Jiwati

BOQ

Name of Work: Special Repairs to Water Supply Scheme at Lambori G.P Lambori Tah-Jiwati
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Sub Work No. 1:- Special Repairs to Water Supply Scheme at Lambori G.P Lambori Tah-Jiwati
22Item No.1:-
33Excavation for foundation/ pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding backfilling etc. complete.197.4Cum
44Item No.2:-
55Excavation for foundation/ pipe trenches in hard murum & boulder including removing the excavated material upto a distance of 50 meters beyond the area & lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation excluding backfilling etc. complete . (CSR 2013-14, Item No.3, P.No.27)592.2Cum
66Item No.3:-
77Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road by all means including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.197.4Cum
88Item No.4:-
99Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means.7.2Cum
1010Item No.5:-
1111Providing and supplying instandard lengths ISI mark rigidunplasticised PVC pipes suitablef or potable water with solventcement joints including cost ofcouplers, as per IS specificationno. 4985 1988 including all local and central taxes,transportation, freight charges, inspectioncharges, loading, unloading,conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost\nof jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).
121290 mm Pressure 6 Kg./Sq.cm.420Rmt
131375 mm Pressure 4 Kg./Sq.cm.810Rmt
141490 mm Pressure 4 Kg./Sq.cm.180Rmt
1515Item No.6:-
1616Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete (with cement solvent joint / ring fit joint).\n
171790 mm Pressure 6 Kg./Sq.cm.420Rmt
181875 mm Pressure 4 Kg./Sq.cm.810Rmt
191990 mm Pressure 4 Kg./Sq.cm.180Rmt
2020Item No7:
2121Providing double flange sluice valve confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete.With byepass arrangement
222265 mm dia. CIDF Scour/ Sluice Valve (PN 1.0)3No
232380 mm dia. CIDF Scour/ Sluice Valve (PN 1.0)5No
2424Item No.8:
2525Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.\n\n\n\n\n\n\n(
262665 mm dia. CIDF Scour/ Sluice Valve (PN 1.0)3No
272780 mm dia. CIDF Scour/ Sluice Valve (PN 1.0)5No
282850 mm N.R.V Without by pass arrangement -PN -1.62No
2929Item No.9:
3030Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including all taxes (Central and Local), railway freight, inspection charges unloding from railway wagon, loading into truck, transportation upto departmental stroes/ site, unloading, stacking etc. complete.\nReflux valves as per I.S.5312 Part I (1984)
313150 mm N.R.V Without by pass arrangement -PN -1.62nos
3232Item No.10
3333Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation, surcharging etc. complete. (CSR 2013-14, Item No.15, P.No.30)983.808cum
3434Item No.11:
3535Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.\nSubmersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages
3636Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages
3737Pump set – 5.0 H.P., H-92.m,Q= 13500 lit/hr For TANDA1NOS
3838Pump set – 3.0 H.P., H-84.m,Q= 12500 lit/hr For Gondguda1NOS
3939Item No.12:
4040Supplying and erecting flat flexible submersible cable with 3 core PVC insulated, PVC sheathed copper conductor.
41413 core, 4 Sqmm60Rmt
4242Item No.13:
4343Providing Panel board fabricated of M.S. sheet with T.P. Switch 32 amp 2 No, Ammeter 96 x 96 sq mm 1 No, Voltmeter 96 x 96 sq mm 1 No, Selector switch 1 No, Pilot Lampset 1 No, Single phase preventer 2 No, Mixed Di Electric Capacitor, FASD starter 12 amp 2 No, Danger board 1 No, ELCB 63 A-4 Pole 1 phase, Rubber matting, 16 SWG M.S.sheet, Change over switch 63 amp 1 No, Self locking arrangement 2 No, Marine ply wood 0.675 Sqm, 10 kg Iron work including cutting, bending, drilling, welding, cleaning, derusting and painting with one coat of red lead paint and two coats of enamel paint.
4444(As per Rate Analysis)1nos
4545Item No.14:
4646Providing and supplying Air Valves as per IS-10845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including all taxes (Central and local), insurance, third party inspection charges, loading, unloding, transporta-toin upto departmental stores / site, etc. compl\n\n\n\n\n \n\n
4747Double Ball Flanged Type - PN -1 With small Orifice3NOS
4848Item No.15:
4949Lowering, laying and fixing CI air valve in proper position and alignment as directed including cost of conveyance from stores to site of work, cost of all jointing material, labour, giving satisfactory hydraulic testing etc. complete.
505050 mm dia. C. I. Double Ball air Valve Flanged (PN-1.0)3NOS
5151Item No.16:-
5252Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing\nof air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.)
5353upto 150mm3NOS
5454Item No.17:
5555Providing ISI mark G.I. pipe of following class and dia. including all local and central taxes, octroi, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.
565680 mm dia. Heavy class G.I24Rmt
5758Drop Pie 65 mm dia. Heavy class G.I12Rmt
5859Item No.18:
5960Lowering, laying and jointing G.I. pipes and specials of following class and diameter including conveyance up to site of work, all labour, giving satisfactory hydraulic test etc complete either underground or in vertical position, as directed by Engineer-in-charge.
606180 mm dia. Medium class G.I24Rmt
6163Drop Pie 65 mm dia. Heavy class G.I12Rmt
6264Item No.19:
6365Providing & laying in situ following grade of C.C of trap/granite/quartzite/gneiss metal for foundation & bedding including dewatering, formwork, compacting and curing, finishing etc. complete.
6466PCC 1:3:6 (M-100) grade3cum
6567Item No.20:
6668Supplying and erecting ‘B’ class G.I. Bend in position with necessary material.
676965 mm dia. G.I. Bend ‘B’ class4No
6870Item No.21:
6971Supplying and erecting ‘B’ class G.I. Coupling in position with necessary material.
707265 mm dia. G.I. coupling ‘B’ class12No
7173Item No.22:
7274Supplying and erecting ‘B’ class G.I. screwed flange (B.S. 10 table ‘D’)\n in position with necessary nut bolts, washers with rubber packing.
737565 mm dia. G.I. Flange ‘B’ class4nos
7476Item No.23:
7577Providing and fixing PVC specials including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading conveyance to site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement etc. etc. complete.154710job
7678Item No.24:
7779Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete.
7880225 mm x 300 mm (40 kg)8nos
7981Item No.25:
8082Providing and supplying ISI mark C.I.D.F. pipes of following dia. including all taxes (Central & Local), railway freight, insurance, unloading from railway wagon, loading into truck, transport to store at site of work, unloading, stacking, etc. complete as directed by Engineer-In-Charge.
818380 mm dia. C.I.D.F. pipes36Rmt
8284Item No.26:
8385Providing and supplying ISI standard C.I.S/S and flanged specials required for the pipe assembly including all taxes (Central & Local), railway freight, insurance, unloading from railway wagon, loading into truck, transport to store at site of work, unloading, stacking, etc. complete as directed by Engineer-In-Charge etc. complete.65Kg
8488Item No.28:
8589Providing and applying required coats of a water based Evercrete Deep Penetrating Sealer (DPS) on cement concrete surface like roads, beams, and columns, plastered walls, basements, roofs, potable water tanks etc to react with cement and to penetrate concrete structure thereby making it resistant to chemicals / chlorides water to make it dust proof and to act as a water resistant at the same time which Strengthens the treated surface and reduce the curing period etc complete. - Note -- for item no. 7 to 4 prior approval of Superintending Engineer will be necessary\n74.845sqm
8690Item No.29:
8791Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru ?nish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.74.845sqm
8892Sub Work No. 2:-Desilting, Deepening & Drilling Horizontal Bore in Existing Supply Well
8993Item No.2:
9094Desilting of Supply well / Intake well / Head Works Sump of water supply/ sewerage work etc in wet or dry condition including lift up to 10.50 m and lead up to 150 m as required beyond the work site stacking & Spreading including necessary guarding etc complete. As directed by engineer in charge
9195Lift 0.00 to 10.5 M12.56Cum
9296Item No.1:
9397Excavation for foundation / pipe trenchesin\nhard rock and concrete road by chiselling,\nwedging, line drilling, by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete\nby all means.
9498Lift 10.50.to 12.00 M12.56Cum
95100Item No3:
96101Dewatering the excavated trenches and pools of water in the building/ trench area by using pumps and other devices including disposing of the water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel) etc. complete.100Bhp/hrs

AI Tender Summary

OUR REF NO 24421797
AUTHORITY Government Departments
TENDER VALUE 9.74 Lakhs
LAST DATE 03-06-2020
Authority
Authority Name Rural Development Department
Work Description Special Repairs To Water Supply Scheme At Lambori G . P Lambori Tah-Jiwati
Basic Detail
Tender No RWS_ZP_CHANDRAPUR 9/2020-21
Bidding Type Tender
Location
City Jiwati
State Maharashtra
Key Dates
Publish Date 28 May 2020
Submission Date 03 Jun 2020
Open Date 04 Jun 2020
Finance
Tender Value 9.74 Lakhs
Tender Fee 500
EMD 9800
Exemption Not Available
Document List
Tendernotice_1.pdf
28D47FAD-36ED-46C0-9366-60080136B042.html
BOQ_1008403.xls
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 28, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 03, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 04, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

html

28D47FAD-36ED-46C0-9366-60080136B042.html

xls

BOQ_1008403.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders