Uttar Pradesh Projects Corporation Limited has published Supply Of Construction Material For The Construction Of Skill Devlopment Training Centre For S . C . Beneficiaries At Svp A And T University , Distt- Meerut ( U . P ) . Submission Date for this Tender is 06-06-2020. Construction Material Tenders in MEERUT Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: SUPPLY OF CONSTRUCTION MATERIAL FOR THE CONSTRUCTION OF SKILL DEVLOPMENT TRAINING CENTRE FOR S.C. BENEFICIARIES AT SVP A&T UNIVERSITY, DISTT- MEERUT (U.P) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Part-A | |||
| 2 | 1.1 | Supply of TMT bar, Fe-550 conforming to IS code 1786-2008 including carriage loading unloading complete. 8mm dia | BI01010001010000000000000515BI0100001113 | 12 | QTL |
| 3 | 1.2 | Supply of TMT bar, Fe-550 conforming to IS code 1786-2008 including carriage loading unloading complete. 10mm dia | BI01010001010000000000000515BI0100001114 | 90 | QTL |
| 4 | 1.3 | Supply of TMT bar, Fe-550 conforming to IS code 1786-2008 including carriage loading unloading complete. 12mm dia | BI01010001010000000000000515BI0100001115 | 15 | QTL |
| 5 | 1.4 | Supply of TMT bar, Fe-550 conforming to IS code 1786-2008 including carriage loading unloading complete. 16mm dia | BI01010001010000000000000515BI0100001116 | 15 | QTL |
| 6 | 1.5 | Supply of TMT bar, Fe-550 conforming to IS code 1786-2008 including carriage loading unloading complete. 20mm dia | BI01010001010000000000000515BI0100001117 | 4 | QTL |
| 7 | 2 | Part-B | |||
| 8 | 2.1 | Supply of Bricks shall be of approved quality of standard specifications, made of good brick earth, uniform deep red,cherry or copper colour, thoroughly burnt in kiln without being vitrified, regular in shape andsize, sound, hard, homogeneous in texture, true to shape and of standard dimension and shall be free form cracks, chips, flaws, stones or humps of any kind and shall not show appreciable signs of efflorescence either dry or subsequent to soaking in water.Bricks shall measure 230x115x75 mm A tolerance upto ± 6mm in length ± 3 mm width and ± 2 mm in thickness shall be permitted. A frog 6 mm deep shall be provided on the upper face. The Bricks shall emit a clear ringing sound on being struck and have minimum crushing strength of 150 kg./sq.cm. All the bricks which absorb water more than 20% of their own dry weight after 24 hours immersion in cold water shall be rejected. | BI01010001010000000000000515BI0100001118 | 150000 | Nos. |
| 9 | 2.2 | Supply of Pozonolla Portland Cement as per ISI code 1489-2015 (Prism, Birla, ACC. JYPEE or equivalent) Every bag shall be deemed to contain 50 kg. of cement. The suppliers may liable to submit the test report . | BI01010001010000000000000515BI0100001119 | 2600 | Bags |
| 10 | 3 | Part-C | |||
| 11 | 3.1 | Supply of 20mm guage approved stone grit from Stone chips or stone ballast for cement concrete (plain or reinforced) shall be hard, of uniform and fine texture.free form faults or planes of weakness and free from weathered faces. The ballast or chips must be free from loam, clay or any surface coating, free from organic matter or other impurities and screened, free of dust. Stone of black and hard variety as is generally available from quarries in Jwalapur/Haridwar areas will be normally used. Stone aggregates from other sources may also be used provided the same is found suitable in the opinion of the Engineer-in-Charge. The opinion of Engineer-in-Charge must be recorded in writing. The ballast or chips shall be obtained by breaking from large blocks and must be more or less cubicle in shape stone grit grading shall be in conformity with the requirements laid down in the Indian Standards Specification IS : 383-2016 as shown below \npercentage passing for single sized aggregate of nominal size. \n40mm Passing 100%\n20mm passing 85-100%\n10mm passing 0-20%\n4.75 mm passing 0 - 5% | BI01010001010000000000000515BI0100001120 | 60 | CUM |
| 12 | 3.2 | Supply of 10mm guage approved stone grit from Stone chips or stone ballast for cement concrete (plain or reinforced) shall be hard, of uniform and fine texture.free form faults or planes of weakness and free from weathered faces. The ballast or chips must be free from loam, clay or any surface coating, free from organic matter or other impurities and screened, free of dust. Stone of black and hard variety as is generally available from quarries in Jwalapur/Haridwar areas will be normally used. Stone aggregates from other sources may also be used provided the same is found suitable in the opinion of the Engineer-in-Charge. The opinion of Engineer-in-Charge must be recorded in writing. The ballast or chips shall be obtained by breaking from large blocks and must be more or less cubicle in shape stone grit grading shall be in conformity with the requirements laid down in the Indian Standards Specification IS : 383-2016 as shown below \npercentage passing for single sized aggregate of nominal size. \n20mm Passing 100%\n12.5mm passing 85-100%\n10mm passing 40-85%\n4.75 mm passing 0 - 10% | BI01010001010000000000000515BI0100001121 | 60 | CUM |
| 13 | 3.3 | Supply of coarse sand shall be clean sharp and free from clay, loam, organic or any other foreign matter, shall be obtained from approved source. The contractor shall get the sample of coarse sand. approved by the Engineer-in-Charge. Sand which in the opinion of the Engineerin- Charge or his representative is dirty, must be washed to his satisfaction at the cost and expenses of the contractor coarse sand shall pass through a mesh, 4.75 mm. square measured in the clear. Sand shall not be used for concrete works if it contains more than 10% of fine grains passing through a 76 mesh sieve. should the fineness modulus be less than 2.25 unless specific permission is obtained from the Engineer-in-Charge. | BI01010001010000000000000515BI0100001122 | 235 | CUM |
| 14 | 3.4 | Supply of 40mm guage approved stone Ballast from Hard Stone ballast for cement concrete (plain or reinforced) shall be hard, of uniform and fine texture.free form faults or planes of weakness and free from weathered faces. The ballast or chips must be free from loam, clay or any surface coating, free from organic matter or other impurities and screened, free of dust. Stone of black and hard variety as is generally available from quarries in Jwalapur/Haridwar areas will be normally used. Stone aggregates from other sources may also be used provided the same is found suitable in the opinion of the Engineer-in-Charge. The opinion of Engineer-in-Charge must be recorded in writing. The ballast or chips shall be obtained by breaking from large blocks and must be more or less cubicle in shape stone grit grading shall be in conformity with the requirements laid down in the Indian Standards Specification IS : 383-2016 as shown below \npercentage passing for single sized aggregate of nominal size. \n80mm Passing 100%\n40mm passing 95-100%\n20mm passing 30-70%\n10 mm passing 0 - 5% | BI01010001010000000000000515BI0100001123 | 74 | CUM |
| 15 | 3.5 | Supply of Fine Sand shall be clean sharp and free from clay, loam, organic or any other foreign matter, shall be obtained from approved source. The contractor shall get the sample of coarse sand. approved by the Engineer-in-Charge. Sand which in the opinion of the Engineerin- Charge or his representative is dirty, must be washed to his satisfaction at the cost and expenses of the contractor coarse sand shall pass through a mesh, 4.75 mm. square measured in the clear. Sand shall not be used for works if it contains more than 10% of fine grains passing through a 150 mesh sieve. should the fineness modulus be less than 1.25 unless specific permission is obtained from the Engineer-in-Charge. | BI01010001010000000000000515BI0100001124 | 40 | CUM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
