Department Of Local Bodies has published Electrification Work In Jay Niwas Udyan And Poundrik Udhyan Year 2020-21. Submission Date for this Tender is 15-06-2020. Electrification Work Tenders in JAIPUR Rajasthan. Bidders can get complete Tender details and download the document.
| Name of Work: Electrification work at Pondrik Udhyan and Jai Niwas Udhyan hawa mahal zone west | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | (51.1.4) P/Laying XLPE/P.V.C. insulated & P.V.C. sheathed cable of 1.1 kv grade with aluminium conductor of IS: 7098-I/1554 P-I of Group 2 of approved make in ground as per IS: 1255 including excavtion of 30 cm x 75 cm size trench, 25 cm thick under layer of sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection, tesing etc. as required of size. | |||
| 2 | 2 | (51.1.4.1) 10 sq.mm. 2 core armoured G-Ist | 8000 | Mtr. | |
| 3 | 3 | (51.1.6.4) 25 sq.mm. 4 core armoured G-Ist | 3500 | Mtr. | |
| 4 | 4 | (51.1.7.5) 35 sq.mm. 4 core armoured G-Ist | 200 | Mtr. | |
| 5 | 5 | (44.1.7) Supplying and drawing FR PVC insulated & unsheathed flexible Copper Conductor ISI marked (IS: 694) of 1.1 Kv. grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 2 sq. mm x 2.5 mm. | 1200 | Mtr. | |
| 6 | 6 | (54.5) S & Laying following size "A" class G.I. pipe with accessories for laying earth conductor/strip in ground/surface/recess as required. | |||
| 7 | 7 | (54.5.6) 50 mm dia. | 390 | mtr | |
| 8 | 8 | (48.22) P&F of thermoplastic/ PVC cable junction boxes of following minimum sizes with IP65/ IP55 protection including threaded cable glands made of polyamide material, terminals complete in all respect. | |||
| 9 | 9 | (48.22.2) 98 x 98 x 50 (mm) (4 Sq. mm) | 50 | Each | |
| 10 | 10 | (58.28) Supply and erection of Decorative Cast Iron pole as per approved design of following length with base plate on\nthe cement concrete foundation of M-15 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III).\nThe pole shall be made of Cast Iron as per IS 210:1993, precision machining and filling job to achieve good finish\nand a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied.\nApproved coloured UV resist coating of mat/ glossy/ metallic finish followed after air drying of pole. The pole shall have a weatherproof flush door and locking arrangements, two/ one arm bracket of length of 430/380mm complete in all respect. | |||
| 11 | 11 | (58.28.5) 5 mtr | 180 | Each | |
| 12 | 12 | (58.35) P&I of IP65 protected Top/Bottom mounted LED Post top Light system. Fixture made of powder coated die\ncast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy >90 Lumen/W.\nSMD LEDs , System CRI>70, CCT: 3000/4000/6500 K. The integral SMPS based electronic driver must be\nconstant current and surge protection of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<20% and input\nVoltage range of 90-270V AC at 50Hz. System life of 50000 burning hours with 70% of Initial Lumens maintained. Light output in Cool white or Warm White\nColour as per engineers choice. Fixture must be in compliance with IS/CE Standards. External Surge Protection Device(SPD) to be connected\nsaparately | |||
| 13 | 13 | (58.35.1) 40W LED Post Top Fixture Top Mounted | 180 | Each | |
| 14 | 14 | (59.57) MAIN CUBICAL PANEL / STREET LIGHT CONTROL PANEL\nP/F testing & commissioning of kiosk type weather proof out door main cubical panel size 750 mm X 1250 mm X 500 mm (app.) made out of 14 gauge MS sheet front and back both side openable duly hinged door with locking arrangement by providing both side held\ndraft and all required hard wares. The cubical should be dust and vermin proof followed by coat of zimpholite primer and finally two coats of enamal gray paint. The cubical should be mounted with hard ware on angle iron frame size 50 X 50 X 6 mm and 1500 legs duly painted framed be grouted 750 mm below ground level with cement concrete 1:3:6 in 1000 X 500 X 600 mm and providing brick masonary along angle iron frame above G.L. They shall be in two section comprising as follows: \n(i) Providing & Fixing 415 V ,TP combination double break HRC switch fuse unit .100 Amp. rating for incoming supply with HRC fuse 100 Amp rating and of BCH/L&T/EE/ Siemens/ ABB make.(iii) P/F open busbars 25mmX3mm of required length duly covered by heat shrinkable sleeves with busbar supporters(iv) Provision for residual current operated 63 Amp. 1 Pole ELCB of 30MA to 300 MA sensitively as required including making connections etc.(EE/Load stop make)(v) P/F 2 Nos. 415 Volts TPN combination double break switch fuse unit,63 Amp. Rating with HRC fuses (EE/mds/ SCHNEIDER bch/Siemens )for outgoing cable and making connection etc. also to have a provision for two nos. above switchs.(vi) P/F of 3 nos. RYB phase indicator resitance type complete with lamp P/F of HT danger plate of size 200 X 150 mm made of aluminium sheet 20 gauge.(vii) P/F cable glands double compression type and Al. lugs duly crimped for incoming cable and out going Cables.(viii) Providing 2 Nos. earth terminals including lugs and H/W duly inter connected with 8 SWG copper wire .(x) Cable termination shall be fixed at backside of the panel with H/W and spring washers(xi) Light control switch with photo senser complete unit as required | 5 | Each | |
| 15 | 15 | (46.1) P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS\n8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs,\ntesting etc. as required. | |||
| 16 | 16 | (46.1.1.2) 6 A to 32 A rating | 180 | Each | |
| 17 | 17 | (54.2) Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating | |||
| 18 | 18 | (54.151.1) With pipe in pipe technology with 80-100 micron G.I. coating G.I. pipe 2000 mm long , 50/25 mm , terminal 12 mm G.I. strip | 10 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
