| 1 | 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | | | |
|---|
| 2 | 1.01 | For fixed portion\nPowder coated aluminium (minimum thickness of powder coating 50 micron) | | 30 | kg |
|---|
| 3 | 2 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | | | |
|---|
| 4 | 2.01 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | | 40 | kg |
|---|
| 5 | 3 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | | 110 | sqm |
|---|
| 6 | 4 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | | 20 | sqm |
|---|
| 7 | 5 | Finishing walls with Acrylic Smooth exterior paint of required shade : | | | |
|---|
| 8 | 5.01 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | | 100 | sqm |
|---|
| 9 | 6 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. | | | |
|---|
| 10 | 6.01 | Two or more coats on new work | | 60 | sqm |
|---|
| 11 | 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | | 60 | sqm |
|---|
| 12 | 8 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : | | | |
|---|
| 13 | 8.01 | 150x10 mm | | 25 | each |
|---|
| 14 | 9 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: | | | |
|---|
| 15 | 9.01 | 125 mm | | 12 | each |
|---|
| 16 | 10 | Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : | | | |
|---|
| 17 | 10.01 | 115 mm | | 12 | each |
|---|
| 18 | 11 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. | | | |
|---|
| 19 | 11.01 | 1.0 mm thick | | 80 | sqm |
|---|
| 20 | 12 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as\nper direction of Engineer-in-charge. | | 5 | metre |
|---|
| 21 | 13 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | | 60 | sqm |
|---|
| 22 | 14 | Providing and fixing Acrylic Sheet in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | | | |
|---|
| 23 | 14.01 | With Acrylic sheet of 5.50 mm thickness | | 5 | sqm |
|---|
| 24 | 15 | Providing & fixing 6mm thick commerical ply of ISI marked in cupboard shutters with screws and nails complete as per direction of engineer-in-charge. \n6mm thick commerical plywood | | 16 | sqm |
|---|
| 25 | 16 | Providing and fixing ISI marked cupboard shutters of 18mm thick conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains: | | | |
|---|
| 26 | 16.01 | 18mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. | | 20 | sqm |
|---|
| 27 | 17 | Providing and fixing 18mm thick board partition of approved quality non decorativetype core of block board construction with frame of 1st class hard wood and well matched commercial 3ply veneering with vertical grain or cross band and face veneer on both face of partition i/c nails etc.all complete. | | 40 | sqm |
|---|
