Construction Of Rcc 2 Storied Ps Building With Provision Of Reception And Conference Hall With Cyber Room Etc . In Existing Police Station At Mankachar P . S . In South Salmara District Under Moitri Scheme . ( Balance Work )
Tender Value
1.39 Crore
Estimated cost
Bid Submission
02 Jun 2020
0 days left
EMD
2.79 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mankachar P.S. in South Salmara district → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Rcc 2 Storied Ps Building With Provision Of Reception And Conference Hall With Cyber Room Etc . In Existing Police Station At Mankachar P . S . In South Salmara District Under Moitri Scheme . ( Balance Work )
BOQ
| Name of Work: Construction of RCC 2-Storied Police Station Building with provision of Reception (Assam Type Ground Floor) & Conference Hall with Cyber Room & Work Station & Women Cell & Counseling Room for Drug ADICT & JUVENILE, Boundary Wall, Gate, Approach Road etc. in existing Police Station at Mankachar P.S. in South Salmara District under MOITRI Scheme. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Jungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm | item1 | 414 | Sqm |
| 2 | 2 | Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. | item2 | 413.9 | Sqm |
| 3 | 3 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.(A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil | item3 | 661.18 | cum |
| 4 | 4 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | item4 | 1.44413 | Cum |
| 5 | 5 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royalty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahaty City | item5 | 450 | cum |
| 6 | 6 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | item6 | 2.15276 | Cum |
| 7 | 7 | (b) In prop 1cement: 4 sand :8 coarse aggregate by volume | item7 | 25 | cum |
| 8 | 8 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling. | item8 | 740.69 | sqm |
| 9 | 9 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed. (a) 15 mm thick | item9 | 252.69 | sqm |
| 10 | 10 | Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately). \n(b) 50mm thick | item10 | 50 | sqm |
| 11 | 11 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.ii) 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | item11 | 95 | Rm |
| 12 | 12 | Red oxide plaster skirting with top layer of 5 mm thick cement plaster of cement mix using 3.5 kg. red oxide of iron per 50kg of cement in proportion 1:3 (1 cement: 3 coarse sand) finished with a floating coat of cement red oxide mix of same proportion.(a) 15 mm thick with under layer of 10 mm thick cement plaster. | item12 | 40 | Sq.m |
| 13 | 13 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). (I) Using Mixer Machine. (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. b) M20 grade concrete or Prop. 1:1.5:3 | item13 | 76.23 | cum |
| 14 | 14 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser. b) M20 grade concrete or Prop. 1:1.5:3 | item14 | 208.52 | cum |
| 15 | 15 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | item15 | 539.7 | Sqm |
| 16 | 16 | Sides of tie beams, grade beams etc. at or below ground level. (a) Using 38mm thick plank | item16 | 160 | Sqm |
| 17 | 17 | Sides of tie beams, grade beams etc. at or below ground level.\n(b) Using 25mm thick plank | item17 | 116.3 | Sqm |
| 18 | 18 | Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (ii) Using 25mm thick plank | item18 | 530.49 | Sqm |
| 19 | 19 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. (ii) Using 25mm thick plank | item19 | 710 | Sqm |
| 20 | 20 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. (ii) Using 25mm thick plank | item20 | 775.67 | Sqm |
| 21 | 21 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank) | item21 | 27.56 | Sqm |
| 22 | 22 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level). a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars | item22 | 219.39 | Qtl |
| 23 | 23 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level). b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX)\n (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. | item23 | 0.53 | Qntl |
| 24 | 24 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary. (d) In proportion 1:6. | item24 | 15 | Cum |
| 25 | 25 | (I) In Sub-structure upto plinth level including dewatering if necessary. (b) In proportion 1:4. | item25 | 4.16 | Cum |
| 26 | 26 | Cutting down trees where the building is to beconstructed of girth exceeding 300mm, grubb ing up roots, filling pits and levelling off ground lopping branches, trimming and removeing to distance beyond 30m and stacking serviceable materials and cleaning site etc. as directed.ii).Girth exceeding 1000mm but not exceeding 1500mm | item26 | 4 | Each |
| 27 | 27 | Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels | item27 | 28.08 | Sqm |
| 28 | 28 | Dismantling wood work in frames, trusses, purlins and rafters including stacking the materials as directed by the department for all levels. | item28 | 6.48 | Cum |
| 29 | 29 | Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels | item29 | 3.312 | Cum |
| 30 | 30 | Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels | item30 | 162.08 | Sqm |
| 31 | 31 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | item31 | 32 | sqm |
| 32 | 32 | Cellular Concrete Block work using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement morter of proportion 1: 5 including racking out joints and curing complete as directed instructure. (protruding rod is to be provided at every 3 course interval and will be measured and paid separately). (b) In superstructure above plinth level up to 1st floor level. | item32 | 90 | Cum |
| 33 | 33 | Extra over item no.4.3.1 (b) above for CC Block work in each subsequent floor or part thereof above 1st floor level. | item33 | 89 | Cum |
| 34 | 34 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately). (A) 112mm thick brick wall. (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | item34 | 237.66 | Sqm |
| 35 | 35 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make. ii) Of size 600mmx600mm and above | item35 | 587 | Sq.m |
| 36 | 36 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. VITRIFIED. i)Normal range (Sizes 300 mm x 300mm and above). Somany made- Durastone (Unpolished heavy duty Vitrified Tiles). a). Premium | item36 | 85 | Sq.m |
| 37 | 37 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). c) Delux range \nSomany/ Orient/Nitco/Varmora Make. iv) Of size 300mmx600mm and above | item37 | 175 | Sq.m |
| 38 | 38 | Providing polished granite tiles of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department).(i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) | item38 | 85 | Sq.m |
| 39 | 39 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. b) In cement mortar 1:4 | item39 | 729 | Sqm |
| 40 | 40 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair side. b) In cement mortar 1:5 | item40 | 3336 | Sqm |
| 41 | 41 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side. b) In cement mortar 1:4 | item41 | 1302.95 | Sqm |
| 42 | 42 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | item42 | 335 | Sqm |
| 43 | 43 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. a) On Single coat plaster | item43 | 533 | Sqm |
| 44 | 44 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm). (i) Thickness = 1.5 mm thick | item44 | 4950 | Sqm |
| 45 | 45 | m) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. | item45 | 4950 | Sqm |
| 46 | 46 | (ii). Top coat | item46 | 4950 | Sqm |
| 47 | 47 | b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. | item47 | 4950 | Sqm |
| 48 | 48 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item48 | 4243.94 | Sqm |
| 49 | 49 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. II Ornamental grill. (b) Fixed to steel frames. | item49 | 863 | Kg |
| 50 | 50 | (c) Fixed to Brickwork/P.C.C/R.C.C. | item50 | 411 | Kg |
| 51 | 51 | Extra for providing security grill welded to casement window frames With 16mm dia M.S round placed horizontally at a distance of 10 cm c/c @ 15kg/ 16kg per sq.meter as per approved drawing. | item51 | 8 | Sqm |
| 52 | 52 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | item52 | 7 | Sq.m. |
| 53 | 53 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item53 | 222 | Sqm |
| 54 | 54 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed \"red-lead/ red oxide\" primer. | item54 | 222 | Sqm |
| 55 | 55 | Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (b) 1.60mm thick sheet. (iii) Size 125mm x 60mm (Single rebate) | item55 | 200 | M |
| 56 | 56 | Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a) 2 Track sliding window. (i)6mm clear glass | item56 | 88 | Sqm |
| 57 | 57 | Providing, fitting and fixing anodised aluminium framed glazed doors with partition walls partly glass and partly prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm sections of approved brand with doors style of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm, fitting with glazing clip, special rubber type gusket complete including hydraulic floor spring pivot aluminium door handle lock angles cleat etc. complete as directed by the department at all levels. (i)6mm thick glass panes and 12mm prelaminated board | item57 | 14 | Sqm |
| 58 | 58 | Providing, fitting and fixing anodised aluminium partition walls of standard sections of approved brand, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels. (ii)6mm clear glass | item58 | 8 | Sqm |
| 59 | 59 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core. (ii) 35 mm thick . | item59 | 91 | Sq.m. |
| 60 | 60 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts. i) 300mm x 16mm | item60 | 55 | Each |
| 61 | 61 | b) Tower bolts. i) 300mm x 12mm | item61 | 55 | Each |
| 62 | 62 | c) Door handles. iv) 150mm | item62 | 110 | Each |
| 63 | 63 | t) Door stopper with rubber stopper | item63 | 44 | Each |
| 64 | 64 | m) Mortice lock vertical type iv) Aldrop with In built Lock-6 lever kadi tala(Godrej Make) | item64 | 53 | set |
| 65 | 65 | Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels. | item65 | 459 | Sqm |
| 66 | 66 | LANDSCAPING\nSupplying and laying of selected grass turves [ size 60 cm x 30 cm] after preparing the land by removing of all unwanted debruises ( rubbles, pebbles, plant roots etc.), mixing of organic manure, levelling the surface and initial maintenance by proper and periodic rolling, mowing and irrigation etc.( as specified) for a period of six months from the date of laying of grass including the application of recommended dose of fertilizers(N:P:K) mixture as specified and directed by the department.(b) By Carpet grass (Axonopus affinis). (b) BY CARPET GRASS (Axonopus affinis) : | item66 | 33 | Sqm |
| 67 | 67 | POT PLANTING. Supplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (C) With Mokara. (II) Using earthen pot of 60 cm dia. | item67 | 5 | each |
| 68 | 68 | BED PLANTING. Supplying and planting of Dahlia / Chrysanthemum / Gladiolus on the ground ( bed planting, bed size 45 cm x 45 cm x 45 cm) including the preparation of the soil, providing organic manure and fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . | item68 | 7 | each |
| 69 | 69 | TREE PLANTING. Supplying and planting of ornamental trees (1'-0\" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE. (A) Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar | item69 | 35 | each |
| 70 | 70 | (B) Kanchan / Nahar / Arjunu | item70 | 15 | each |
| 71 | 71 | Flowering Tree (A) Gulmohar / Ashok | item71 | 10 | each |
| 72 | 72 | SANITARY AND WATER SUPPLY WORK: \nProviding and fixing Vitreous china pedastal type water closet (Europian type W.C. pan 400 mm high ) with seat and lid, CP brass hinges and rubber buffer CI/MS bracket, 40 mm dia flush bend and fittings i/c painting of brackets (Flushing cistern to be paid saparately) Parryware make White combination closet S trap, (Cat. No. C0205) | item72 | 16 | Each |
| 73 | 73 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately). i) Parryware make. a) White. (ii) Deluxe Single Flush (Cat. No. C8091/C8057) | item73 | 16 | Each |
| 74 | 74 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin of with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. A) Parryware make. a) White (ii) Integrated EFS-AC with power source (Cat No.C8097) / Integrated EFS- DC (Cat No.C8098) | item74 | 4 | Each |
| 75 | 75 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately). PEDESTAL BASIN (with pedestal). (A) Parryware Make (a) White (iv) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380) | item75 | 18 | Each |
| 76 | 76 | Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. (a) Jaquar make (i) Bottle trap (with internal partition) 32mm size with 250mm long wall connection pipe (Cat.No. ALD-769) | item76 | 18 | each |
| 77 | 77 | Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified. (a) Jaquar make (i) Continental toilet paper holder (Cat.No. ACN-1151N) | item77 | 16 | each |
| 78 | 78 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75mm dia. | item78 | 4.4087 | each |
| 79 | 79 | (i) 160mm dia. | item79 | 10 | each |
| 80 | 80 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.(ii) 110mm dia. | item80 | 45 | RM |
| 81 | 81 | (i) 160mm dia. | item81 | 16 | RM |
| 82 | 82 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.(ii) 110mm dia. | item82 | 20 | each |
| 83 | 83 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.(ii) 110mm dia. | item83 | 15 | each |
| 84 | 84 | Providing and fixing single equal plain junction with door including bolts and nuts and other fittings as required and complete at all levels. (b) concealed by cheiseling and making good the damage. (ii) 100 mm dia | item84 | 14 | each |
| 85 | 85 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.(ii) 110mm dia. PVC cowel of ISI make | item85 | 45 | each |
| 86 | 86 | Providing and fixing CP hinged grating, 110 mm dia in floor complete as directed and specified. | item86 | 42 | each |
| 87 | 87 | Providing and fixing C.P. Soap dish complete as directed and specified. (i) (a) Jaquar make continental (Cat. No. ACN1331N) | item87 | 16 | Each |
| 88 | 88 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipe A) Exposed on wall (b) 20 mm nominal outer dia Pipes | item88 | 42 | Mtr |
| 89 | 89 | (c) 25 mm nominal outer dia Pipes | item89 | 32 | Mtr |
| 90 | 90 | (d) 32 mm nominal outer dia Pipes | item90 | 25 | Mtr |
| 91 | 91 | (e)40 mm nominal outer dia Pipes | item91 | 23 | Mtr |
| 92 | 92 | B) Concealed pipe with cutting chases and making good the walls.(a) 15 mm dia nominal outer dia pipes | item92 | 60 | Mtr |
| 93 | 93 | (b) 20 mm dia nominal outer dia pipes | item93 | 45 | Mtr |
| 94 | 94 | (c) 40 mm nominal outer dia Pipes | item94 | 25 | Mtr |
| 95 | 95 | Providing and fixing gun metal country pit valve (full way valve) ISI marked as specified and directed. (d) 20 mm nominal bore | item95 | 15 | each |
| 96 | 96 | (c) 25 mm nominal bore | item96 | 12 | each |
| 97 | 97 | (a) 40 mm nominal bore | item97 | 8 | each |
| 98 | 98 | Providing and fixing ball valve complete as directed and specified. (a) 25 mm nominal bore | item98 | 4 | each |
| 99 | 99 | Providing and fixing gun metal check valve including necessary threads to pipe (b) 40mm nominal bore | item99 | 4 | each |
| 100 | 100 | Suppling, fitting and fixing approved uPVC pipe of different sizes with all necessary fittings of approved brand such as bend, tee, elbow, reducers, nipple, plug, long screw, fitting clamps, etc.complete at all levels as directed and specified. (B) Concealed chiesling or breking brick wall / CC wall / RCC wall and making good to the damaged structure. SUPREME / PRINCE/ SFMC/ FUSION Band or other equalent brand ( high pressure pipe SCH 40 ) (f) 15mm nominal bore | item100 | 115 | Mtr |
| 101 | 101 | Constructing inspection pit inside measurement 450x450x450 mm flush with 100 mm dia HCI/PVC pipes and cement concrete base in 1:3:6 over flat brick soiling, 12 cm brick work in cement mortar 1:4 (1 cement :4 coarse sand) finished with 13 mm cement plaster in 1:2 cement mortar for inside walls and floor. 450x450 air tight CI inspection pit cover and frame complete including supply of materials and necessary excavation.complete as per design : | item101 | 5 | each |
| 102 | 102 | Providing and placing cylindrical vertical claused top (CPVC) tank of Sintex / Polycon / Patton make over the stagging with cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes. Sintex make 1x2000= 2000 Ltrs. | item102 | 2 | each |
| 103 | 103 | Providing and fixing C.P. bib cock 15 mm dia of approved brand as directed and specified. (Pipes shall be measure separatly) (I) (b) Essco make long body bib cock with flange. | item103 | 42 | each |
| 104 | 104 | Providing, fitting and fixing CP stop cock of approved brand of size mentioned below and directed and specified (Pipes shall be measure separatly) a (I) Jaquar make 15 mm nominal dia conceled stop cock | item104 | 42 | each |
| 105 | 105 | Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed. (a) 2000 litre capacity | item105 | 2 | Each |
| 106 | 106 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (a) Jaquar make (ii) Continental towel ring round (Cat.No. ACN-1121BN) | item106 | 17 | each |
| 107 | 107 | Rain Water Harvesting:- Construction of R.C.C. ring well of 1200mm inside diameter including supplying necessary ring of 75mm thick and 500mm high of prop 1:2:4 reinforced with 8mm dia M.S. rod at 230mm c/c vertically and 5nos of 8mm dia bar horizontally along with R.C.C. well curb of size 400mm high and 100mm thick at top and 50mm thick at bottom in prop. 1:2:4 reinforced with 5nos of 8mm dia rod at 200mm c/c vertically including sinking of R.C.C. ring to a required depth bailing out water, mud etc. if necessary and fitting and fixing of R.C.C. kerb and ring in proper position with cement mortar of prop. 1:2 including with fitting in sides by sand in layer not more than 150mm and duly compacting the same up to the platform level complete as directed by the department. (a) Up to 10.00m depth . | item107 | 3 | each |
| 108 | 108 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed.a) 100mm thick slab | item108 | 15 | Sqm |
| 109 | 109 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick | item109 | 83.57 | Sqm |
| 110 | 110 | EXTERNAL WATER SUPPLY :\nLabour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department .x) Bore hole of 150 mm diameter | item110 | 60 | RM |
| 111 | 111 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.G.I. pipe SUPREME /PRINCE / FUSION /SFMC Brand v) 110mm diameter | item111 | 60 | RM |
| 112 | 112 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe a) TATA / SAIL (Medium)socket should be welded to the pipes. ii) 32mm diameter | item112 | 35 | RM |
| 113 | 113 | Supplying fitting and fixing GI filter 2.00 metre long. | item113 | 1 | Each |
| 114 | 114 | Supplying fitting and fixing check valve (non return valve) including thread to pipes. ii) 32mm diameter | item114 | 1 | Each |
| 115 | 115 | Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained | item115 | 1 | Job |
| 116 | 116 | Flushing, clearing, washing and watering of the tube well | item116 | 1 | Job |
| 117 | 117 | Supplying fitting and fixing iron removal filter filling with treated sand, pebbles, manganishdioxide and other required materials of various filtration rate per hour of DOLPHIN make with all necessary fittings such as valve,bib cock,pipe connection etc.with a free maintanance period of six months. (A) With Zoloto fittings. (II) 2000 liters capacity (a) 6 mm thick Vessel FRP | item117 | 1 | Each |
| 118 | 118 | Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) \nBRAND: FIRESTOP / FIREND / FIRESHIELD 4.5 kg capacity Cylinder - IS :15683 | item118 | 2 | Each |
| 119 | 119 | Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark\n(05 kg capacity) \nBRAND : FIRESTOP / FIREND / FIRE SHIELD | item119 | 2 | Nos. |
| 120 | 120 | (a) Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete. | item120 | 178.94 | Sqm |
| 121 | 121 | Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed. | item121 | 178.94 | Sqm |
| 122 | 122 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | item122 | 178.94 | Sqm |
| 123 | 123 | Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts). | item123 | 7 | Qntl. |
| 124 | 124 | Providing and fixing Stainless Steel (Grade 304) railing made of Hollow Tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainess steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainess steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge. (For payment, only weight of Stainless Steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered). | item124 | 168 | kg |
| 125 | 125 | BARBED WIRE FENCING:\n Supplying , fitting and fixing galvanised barbed wire fencing with seven strands of barbed wire 12 S. W. G .x 2plies x 4 points at 75mm apart with angle iron intermediate fencing posts not more than 1800mm apart and straining and end post etc. as necessary to be fitted with straining eye bolts and staples etc.complete as directed, specification of the angle iron post as given.(All the angle iron posts to be embeded 600mm in C.C.pillars of size 300mmx300mmx600mm in prop.1: 3: 6 and one coat of anticorrosive ready mixed painting to all iron works) including excavation of foundation trenches for C.C. blocks and refilling and removal of surplus soil after completion of works. | item125 | 30 | RM |
| 126 | 126 | PAVERS FOR PARKING AREA :Providing polished tiles of approved quality, size, shape of specified thickness on pavers over a base of 100mm compacted sand gravel including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (A) SUN ROCK HIGH CTS Tiles (Pavers). (a) Silicon (Pavers) 60 mm thick | item126 | 450 | Sq.m |
| 127 | 127 | FURNITURE & FURNISHING\nEXECUTIVE DESK GRADE I : Rectangular table top with 25 mm thick PLPB finished with 2 mm th. PVC edgeband and alongwith 18 mm th. PLPS understructure with all necessory fittings and hardware (Size 2195 X 900 X 750) | item127 | 1 | Each |
| 128 | 128 | Storage Cabinet with 2 drawers & shutters (Size 1195 X 400 X 750) | item128 | 2 | Each |
| 129 | 129 | EXECUTIVE DESK GRADE II : Rectangular table top with 25 mm thick PLPB finished with 2 mm th. PVC edgeband and alongwith 18 mm th. PLPS understructure with all necessory fittings and hardware (Size 1500 X 900 X 750) | item129 | 4 | Each |
| 130 | 130 | Storage Cabinet with 2 drawers & shutters (Size 1050 X 400 X 750) | item130 | 2 | Each |
| 131 | 131 | EXECUTIVE DESK GRADE III : Rectangular table top with 25 mm thick PLPB finished with 2 mm th. PVC edgeband and alongwith 18 mm th. PLPS understructure with all necessory fittings and hardware (Size 1500 X 900 X 750) | item131 | 8 | Each |
| 132 | 132 | CONFERENCE TABLE : Conference table made with 25 mm th. PLPB understructure finished with 2 mm th. edgeband alongwith 18 mm th. PLPB understructure with double modesty and access flap (450 mm )- 4 nos. and all necessory fittings and hardware (Size 4265 X 1500 X 750) | item132 | 1 | Each |
| 133 | 133 | Reception and waiting : Visitors Sofa Bench | item133 | 4 | Each |
| 134 | 134 | CHAIR : Grade I : EMPLOYEES - Hi-Back revolving chair | item134 | 2 | Each |
| 135 | 135 | Grade II : EMPLOYEES | item135 | 8 | Each |
| 136 | 136 | Grade III : EMPLOYEES | item136 | 16 | Each |
| 137 | 137 | CONFERENCE TABLE CHAIR | item137 | 12 | Each |
| 138 | 138 | Reception Table | item138 | 1 | Each |
| 139 | 139 | Supplying and Installation of 1.5 H.P. Crompton Greaves Single phase Pump Submersible Pump Set including necessary Cable for underground and overground. Panel Board as directed by the Department. | item139 | 1 | Each |
| 140 | 140 | Steel Reck | item140 | 6 | Each |
| 141 | 141 | Bamboo Furniture | item141 | 1 | Each |
| 142 | 142 | Bamboo Side Table | item142 | 1 | Each |
| 143 | 143 | Bamboo Dust Bin | item143 | 1 | Each |
| 144 | 144 | Bamboo Clading in Reception oom | item144 | 9 | sqm |
| 145 | 145 | Santary fittings and internal arangement for Differntlyable person | item145 | 18 | Each |
| 146 | 146 | Water Dispensary | item146 | 1 | Each |
| 147 | 147 | Coffee Machine | item147 | 1 | Each |
| 148 | 148 | Providing Curtain with Stainless Steel Curtain pipe | item148 | 21 | Each |
| 149 | 149 | Children Friendly Police Corner Furniture-\nFolding Bed. | item149 | 1 | Each |
| 150 | 150 | Table (Small) | item150 | 1 | Each |
| 151 | 151 | Chair (Children) | item151 | 3 | Each |
| 152 | 152 | GLOW SIGN BOARD:Supplying fitting and fixing of Glow sign board as directed by the Department. | item152 | 1 | Job |
| 153 | 153 | Sheetal Pati | item153 | 9 | Sqm |
| 154 | 154 | Cladding with MCM Modified Clay Material of PHOMI make. Supply of MCM Modiffied Clay Material of PHOMI make as per company stendered dimension, pattern, color as specified, manufactured through unfired patended (Ref. US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K -EN 12667 (2001), thermal resistance of 0.0568 M2 K/W - EN 12667 (2001) and fire insulation - Class-A- ASTM E84 - 15. The Product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement / Polymer / Epoxy based adhesive as per adhesive chart and substrate and per directions of engineer in charge. Grouting should be done using filling and pointing method as per installation drawing provided, and color of the grout should be as per the architects specification depending on the substrate and as per the direction of Engineer -in-Charge. K Series Faching Brick - 225 x 60 mm thickness. | item154 | 19 | Sqm |
| 155 | 155 | Cladding with fiber cement board.\nProviding and fixing external wall panelling in position 12 mm thick \"SHERA, GLO or Equivalent\" fiber cement planks made of autoclaved technology of size 1200 mm x 2400 mm conforming to IS: 14862 : 2000 / (ASTM 1185) on to steel frame work of MS/ Aluminium sections. The M.S/ Aluminium Section should be minimum SHS 50 mm x 25 mm x 2.6 mm thick. The main vertical member are placed @ 610 mm C/C and secured to the existing wall, floor and soffits with the help of MS cleat fixed @ 610 mm C/C vertical. The main member should be fixed horizontally @ 1220 mm C/C. Before fixing the board for groove design 8 mm SHEra Fiber Cement Boards conforming to IS : 14862 need to fixed on the MS tube. For Steel members are to be painted with an synthetic paints over a coat of red oxide. Fix the board with the help of 25 mm self driling. self tapping SHERA Fiber Cement screws @ 300 MM C/C including the cost of Acrylic primer with a wooden paint as per manufactureer specification. The work to be done as per architectural drawings and direction of the Engineer - in Charge.Fiber cement plain board. | item155 | 66.1144 | Sqm |
| 156 | 156 | Supply fitting and fixing stainless steel letter at size 200 mm as directed. | item156 | 1 | L/S |
| 157 | 157 | Supply & fitting inner PVC kit at Bio S/ Tank (I) for 30 Users. | item157 | 13.15 | Sqm |
| 158 | 158 | Anaerobic Microbial Bacteria (AMI) for Bio Digerster @30% of the tank capacity | item158 | 2100 | Ltrs |
| 159 | 159 | Maintenance Legacy \nfor 2nd year - Ground Floor | item159 | 1166.7 | Cum |
| 160 | 160 | 1st Floor | item160 | 946.61 | Cum |
| 161 | 161 | Maintenance Legacy \nfor 3rd year - Ground Floor | item161 | 1166.7 | Cum |
| 162 | 162 | 1st Floor | item162 | 946.61 | Cum |
AI Tender Summary
Tender Timeline
May 21, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJun 02, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 02, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender