| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kinds of soil | | 22.5 | Cum |
|---|
| 2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) | | 4.86 | Cum |
|---|
| 3 | 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) | | 9.56 | Cum |
|---|
| 4 | 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | | 26 | Cum |
|---|
| 5 | 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | | 10 | Cum |
|---|
| 6 | 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) | | 2 | Sqm |
|---|
| 7 | 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. cement mortar 1:4 (1 cement : 4 coarse sand)\n\n | | 24.64 | Sqm |
|---|
| 8 | 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). | | 4.44 | Cum |
|---|
| 9 | 9 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform | | 26.27 | Sqm |
|---|
| 10 | 10 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers | | 11.95 | Sqm |
|---|
| 11 | 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars | | 350 | Kg |
|---|
| 12 | 12 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. | | 31.02 | Sqm |
|---|
| 13 | 13 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) | | 103.44 | sqm |
|---|
| 14 | 14 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) | | 92.21 | Sqm |
|---|
| 15 | 15 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) | | 19.4 | Sqm |
|---|
| 16 | 16 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) | | 22.89 | Sqm |
|---|
| 17 | 17 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | | 50 | Sqm |
|---|
| 18 | 18 | White washing with lime to give an even shade :New work (three or more coats) | | 171.36 | Sqm |
|---|
| 19 | 19 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. 9.120.1 30 mm thick plain | | 12.6 | Sqm |
|---|
| 20 | 20 | Providing anf fixing T- iron frames for doors, windows and ventilators of mild steel tee sections, joints mitred and welded with 15 x 3 mm lugs 10 cm long embedded in cement concrete blocks 15 x 10 x x10 cm of 1; 3: 6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or with wooden plug and screws or rawl lplugs and screws or with dash fastenenr or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer | | 100 | Kg |
|---|
| 21 | 21 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters With ISI marked stainless steel butt hinges of required size Kiln seasoned and chemically treated hollock wood | | 2.16 | Sqm |
|---|
| 22 | 22 | Providing and fixing aluminium handels ISI marked anodised (anodic coating not less than greade AC 10 as per IS 1868) transparent of dyed to required colour and shade woth necessary screws etc. complete of size 125 mm | | 24 | Each |
|---|
| 23 | 23 | Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS 1868) transparent of dyed to required colour or shade with nuts and screws etc complete: in size 200 x 10 mm | | 16 | Each |
|---|
| 24 | 24 | Providing and fixing aluminium sliding door bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS 1868) transparent of dyed to required colour or shade with nuts and screws etc complete: in size 250 x 16 mm | | 8 | Each |
|---|
| 25 | 25 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Angle back wash basin size 600 x 480 mm with single 15 mm CP brass pillar tap | | 2 | Each |
|---|
| 26 | 26 | Providing and fixing mirror of superior glass (of aproved quality) and of required shape and size with plastice moulded frame of approved make and shade with 6mm thick hard board backing Rectangular shape 450 x 350 mm (outer dimension). | | 2 | Each |
|---|
| 27 | 27 | Providing and fixing 600 x 120 x 5 mm glass shelf with edges rounded off supported on anoclised aluminum angle frame with CP brass brackets and guard rail complete fixed with 40mm long screws raw/plugs etc complete. | | 2 | Each |
|---|
| 28 | 28 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter | | 10 | Mtr |
|---|
| 29 | 29 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee with door 110x110x110 mm | | 8 | Each |
|---|
| 30 | 30 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°110 mm bend | | 8 | Each |
|---|
| 31 | 31 | Providing anf fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc internal work:- 15 mm dia nominal bore | | 20 | Mtr |
|---|
| 32 | 32 | Providing anf fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc internal work:- 20 mm dia nominal bore | | 19 | Mtr |
|---|
| 33 | 33 | Providing anf fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls etcConcealed pipe including painting with anti correosive bitumastic paint, cutting chasses and making good the wall 15 mm dia nominal bore | | 10 | Mtr |
|---|
| 34 | 34 | Providing and fixing brass bib cock of approved quality 15 mm nominal size. | | 8 | Each |
|---|
| 35 | 35 | Providing and fixing brass stop cock of a proved quality 15 mm nominal bore | | 6 | Each |
|---|
| 36 | 36 | Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) 20 mm nominal bore | | 1 | Each |
|---|
| 37 | 37 | Providing and fixing ball valve ( Brass of approved quality complete 20 mm nominal bore. | | 1 | Each |
|---|
| 38 | 38 | Providing and fixing unplasticised PVC connection pipe with brass unions 15 mm nominal bore. 30 cm long | | 4 | Each |
|---|
| 39 | 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | | 500 | litre |
|---|
| 40 | 40 | P/L cement concrete 1:5:10 (1:cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size ) up to haunches of SW pipe including bed concrete as per standard design 10 mm dia SW pipe 100 mm diameter SW Pipe. | | 6 | Mtr |
|---|
| 41 | 41 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement:2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 19.30.1 Inside dimensions 455x610 mm and 45 cm deep for singlepipe line :With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5\n\n\n | | 1 | Each |
|---|
| 42 | 42 | Providing and fixing water closet squatting pan (Indian type WC pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vetreous china Orrissa pattern WC pan of soze 580x 440 mm with integral type foot rests | | 3 | Each |
|---|
| 43 | 43 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid | | 1 | Each |
|---|
| 44 | 44 | Add cost index @ 14.42% | | 1 | no |
|---|
