Annual Maintenance Of Jamli Jainagar Road Km . 6/500 To 16/200 ( Sh-Providing Renewal Coat Of 30Mm Thick Bitumenious Concrete At Km . 11/0 To 16/0 )
Tender Value
52.96 Lakhs
Estimated cost
Bid Submission
29 May 2020
0 days left
EMD
86000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Arki → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Maintenance Of Jamli Jainagar Road Km . 6/500 To 16/200 ( Sh-Providing Renewal Coat Of 30Mm Thick Bitumenious Concrete At Km . 11/0 To 16/0 )
BOQ
| Name of Work: Annual maintenance of Jamli Jainagar Road km 6/500 to 16/200. (SH - Providing renewal coat 30mm thick bituminous concrete in KM 11/00 to 16/00) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. (50mm thick) fifty mimiletre including carriage of materials with in all leads and lifts as per the entire satisfaction and direction of Engineer-In-Charge. | BI01010001010000000000000515BI0100001113 | 1775.68 | Sqm |
| 2 | 2 | Providing and applying tack coat with bitumen emulsion using emulsion(RS-I) using emulsion pressure distributor at the rate of 0.275 kg ( zero point two seven five kilogramme) per square metre on the prepared bituminous/granular surfaces treated with primer and cleaned with hydraulic broom as per drawings and technical specifications MORT&H Clause 503 including carriage of materials with in all leads and lifts as per the entire satisfaction and direction of Engineer-In-Charge. | BI01010001010000000000000515BI0100001114 | 17756.8 | Sqm |
| 3 | 3 | Providing and laying bituminous concrete 30mm thick (thirty milimetre ) with 100-120 TPH capacity batch type hot mix plant producing an average output of 75 tonnes (seventy five tonnes) per hour using crushed aggregates of specified grading, premixed with bituminous binder concrete of @ 5.4% to 5.6% (five point four per cent to five point six percent) of mix and filler, transporting the hot mix to work site, laying with a hydro static paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects including carriage of materials with in all leads and lifts as per the entire satisfaction and direction of Engineer-In-Charge.The work should be executed as per Job Mix furmula approved by department .The rates should be quated accordingly.Nothing extra shall be applicable on this account. | BI01010001010000000000000515BI0100001115 | 532.7 | Cum |
| 4 | 4 | CONDITIONS:- All material will be procured by the contractor on his own level | BI01010001010000000000000515BI0100001124 |
AI Tender Summary
Tender Timeline
May 16, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMay 29, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 30, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender