Special Repair To Flooring , Ceiling , Wall Paneling And Allied Works Of Officers Mess And Officers Living In Accommodation At Air Force Station Thoise
Tender Value
24 Lakhs
Estimated cost
Bid Submission
11 Jun 2020
0 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
THOISE → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Flooring , Ceiling , Wall Paneling And Allied Works Of Officers Mess And Officers Living In Accommodation At Air Force Station Thoise
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jun-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Jun-2020 |
BOQ
| Name of Work : SPECIAL REPAIR TO FLOORING, CEILING, WALL PANELING AND ALLIED WORKS OF OFFICERS’ MESS AND OFFICERS’ LIVING IN ACCOMMODATION AT AIR FORCE STATION THOISE | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling of boarding, any description, fixed in any position with nails etc, complete all as specified and as directed. | 495 | Sqm | |
| 2 | 2 | Dismantling timber framed work scantlings 40 sq.cm and over in section, in any position etc. complete all as specified and as directed. | 0.64 | Cum | |
| 3 | 3 | M&L for second class hard wood in scantlings, clean sawn timber fixed complete all as specified and as directed. | 0.52 | Cum | |
| 4 | 4 | All as per item no. 3.00 here-in-before but except timber complete all as specified and as directed. \n(Note: Timber obtained from item no. 2.00 shall be used) | 0.12 | Cum | |
| 5 | 5 | Dismantling timber framed work as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed. | 742.6 | RM | |
| 6 | 6 | M&L for Second class wrought hard wood Plain fillets, square, rectangular or triangular in section, sectional area exc. 13 sqcm but n.exc. 25 sqcm, secured with screws complete all as specified and as directed. | 600 | RM | |
| 7 | 7 | All as per item no. 6.00 here-in-before but except timber complete all as specified and as directed. \n(Note: Timber obtained from item no. 5.00 shall be used) | 142.6 | RM | |
| 8 | 8 | M&L for 12 mm thick Veneered decorative plywood, grade 1 (9 Nos of ply) (with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work complete all as specified and as directed. | 80 | Sqm | |
| 9 | 9 | M&L for 4 mm thick Veneered decorative plywood, grade 1 (3 Nos of ply) (with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work as in ceiling, flat or sloping, etc complete all as specified and as directed. | 20 | Sqm | |
| 10 | 10 | M&L for 6 mm thick Veneered decorative plywood, grade 1 (5 Nos of ply) (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in wall/panelling etc complete all as specified and as directed. | 142.5 | Sqm | |
| 11 | 11 | M&L for 6 mm thick Veneered decorative plywood, grade 1 (5 Nos of ply) (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in ceiling, flat or sloping, etc complete all as specified and as directed. | 152.5 | sqm | |
| 12 | 12 | M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed. | 212.5 | Sqm | |
| 13 | 13 | M&L for preparing old treated wood based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying finishing coat of synthetic varnish complete all as specified and as directed. | 80 | Sqm | |
| 14 | 14 | M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed. | 20 | Sqm | |
| 15 | 15 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including nanital or similar pattern roof covering, or galvalume sheeting, etc. complete all as specified and directed by Engr in Charge.. | 132 | Sqm | |
| 16 | 16 | S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in roofs, walls etc. with grade of zinc coating 275, etc complete all as specified and directed by Engr in Charge. | 95 | sqm | |
| 17 | 17 | M & L for 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr in Charge. | 7 | Sqm | |
| 18 | 18 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. | 115.3 | Sqm | |
| 19 | 19 | Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length complete all as specified and directed. | 7 | 100 Nos | |
| 20 | 20 | M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed. | 50 | Sqm | |
| 21 | 21 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. | 50 | Sqm | |
| 22 | 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed. | 196.5 | Sqm | |
| 23 | 23 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed. | 6.48 | Cum | |
| 24 | 24 | M&L for 75mm thick PCC (1:4:8), type D-2, using 40mm crushed stone aggregate, as in sub-floors, sub-bases, floors and pavings, etc., finished even and fair (without using extra cement) complete all as specified and directed. | 86.5 | Sqm | |
| 25 | 25 | M&L for 15mm thick screed bed or bedding layer in CM (1:6) as in floor complete all as specified and as directed. | 86.5 | Sqm | |
| 26 | 26 | M&L for coloured non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. | 86.5 | Sqm | |
| 27 | 27 | M&L for 10mm thick rendering in CM (1:6) on fair faces of brickwork/concrete surfaces/PCC block masonry complete all as specified and as directed. | 45 | Sqm | |
| 28 | 28 | M&L for glazed, joint free, non-skid, colored ceramic tiles of size 450x300x 7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed. | 45 | Sqm | |
| 29 | 29 | M&L Pavement tiles 36 cm x 27cm x 25mm thick , set jointed with grey cement & pointed in coloured cement slurry in floor to match the shade of tiles complete all as specified and as directed.Make Duracrete (PIAZZA) or Equivalent in Endura | 65 | Sqm | |
| 30 | 30 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. | 50 | RM | |
| 31 | 31 | All as per item no. 30.00 here-in-before but 20 mm bore complete all as specified and as directed. | 20 | RM | |
| 32 | 32 | S&F steel tubes, bore of pipe 15mm, medium grade, galvanised, with all fittings and fixed complete to walls and ceiling or laid in floor including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4 complete all as specified and as directed. | 50 | RM | |
| 33 | 33 | All as per item no. 32.00 here-in-before but 20 mm bore complete all as specified and as directed. | 20 | RM | |
| 34 | 34 | S & F in repairs of 150 mm size stainless steel butt hinges complete all as specified and as directed. | 20 | Each | |
| 35 | 35 | S & F in repairs vitreous china wash down water closet set with ‘P’ trap, premium quality, complete with dual flush, flushing cistern and seat cover complete all as specified and as directed. \nMake : Jaquar Cat Part No FNS-WHT-0320 | 2 | Each | |
| 36 | 36 | S & F in repairs vitreous china wash basin, oval counter top type 550x410mm size, white, premium quality fixed on and including 20 to 25mm thick granite slab of suitable size, CP waste coupling, 32mm dia, waste pipe, PVC short connection pipe, 15mm bore, complete all as specified and as directed.\n(Make: Parryware Cat No. 0466 or equivalent of make Hindware) | 2 | Each | |
| 37 | 37 | S & F in repairs jet spray for water closet with flexible pipe, chromium plated complete all as specified and as directed.\n(Make: Jaquar/Hindware) | 2 | Each | |
| 38 | 38 | S & F in repairs 5.5mm thick decorative looking mirror, ornamental, 800x800mm size with iron decorative frame complete all as specified and as directed. | 2 | Each | |
| 39 | 39 | S & F in repairs of 4 way single lever concealed divertor set with hot & cold concealed stop cock with built in non return valves composite one piece body brass (CP) complete all as specified and as directed. \nMake : Cat Part No. FON-40427 of Jaquar | 2 | Each | |
| 40 | 40 | S & F in repairs tumbler holder brass CP complete all as specified and as directed. \nMake : Cat Part No .AKP-35741P of Jaquar. | 2 | Each | |
| 41 | 41 | S & F in repairs of double coat hook CP complete all as specified and as directed. \nMake : Cat Part No. AKP-35761P of Jaquar | 2 | Each | |
| 42 | 42 | S&F in repairs Glass shelf complete all as specified and as directed. \nMake : Cat Part N0. AKP-35771P of Jaquar. | 2 | Each | |
| 43 | 43 | S&F in repairs corner glass shelf with bracket complete all as specified and as directed. \nMake : Cat Part No. ACN-1173 of Jaquar. | 4 | Each | |
| 44 | 44 | S&F in repairs 15mm dia stop valves, fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed complete all as specified and as directed. | 6 | Each | |
| 45 | 45 | S&F in repairs Towel rail 24 \" complete all as specified and as directed. \nMake : Cat Part No. AKP-35711P of Jaquar. | 2 | Each | |
| 46 | 46 | S&F in repairs of Soap dish CP complete all as specified and as directed. \nMake : Cat Part No. AKP-35731P of Jaquar. | 2 | Each | |
| 47 | 47 | S&F in repairs Toilet paper holder complete all as specified and as directed. \nMake : Cat Part No. AKP-35753P of Jaquar. | 2 | Each | |
| 48 | 48 | S&F in repairs Towel rack 24 \" with lower hangers complete all as specified and as directed. \nMake : Cat Part No. AKP-35781P of Jaquar. | 2 | Each | |
| 49 | 49 | S&F in repairs brass CP waste coupling 32mm size complete all as specified and as directed. \nMake : Cat Part No. ALD-705 of Jaquar | 4 | Each | |
| 50 | 50 | M&L in repairs bib cock CP with wall flange complete all as specified and as directed. \nMake : Cat Part No. KUB-35037F of Jaquar. | 4 | Each | |
| 51 | 51 | M & L for angular stop cock CP with wall flange complete all as specified and as directed. \nMake : Cat Part No. KUB-35053F of Jaquar. | 4 | Each | |
| 52 | 52 | S&F in repairs PVC flexible pipe (Connecter) 15 mm dia, 450 mm long with check nut and bolt with washer complete all as specified and as directed. | 10 | Each | |
| 53 | 53 | S&F in repairs 75mm PVC(SWR) bends any radius complete all as specified and as directed. | 2 | Each | |
| 54 | 54 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. | 20 | RM | |
| 55 | 55 | S&F in repairs of 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. | 20 | RM | |
| 56 | 56 | S&F in repairs 75mm PVC(SWR) vent cowl complete all as specified and as directed. | 2 | Each | |
| 57 | 57 | M&L in repairs of 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. | 2 | Each | |
| 58 | 58 | S&F in repairs 110mm bore PVC (SWR) 'P' trap, including fixed with solvent cement complete all as specified and as directed. | 2 | Each | |
| 59 | 59 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 110 mm dia pipe complete all as specified and as directed. | 2 | Each pipe | |
| 60 | 60 | Plugging to walls in repair complete for wood fillets, grounds moulding, boardings, etc. on cement concrete walls, at distance n. exc 1 mtr complete all as specified and directed by Engr in Charge. | 423 | RM | |
| 61 | 61 | Dismantling of wall and Ceiling boards (fibre,pulp insulation,etc) or insulation boards/slabs/blankets,any thickness,including cover fillets complete all as specified and as directed. | 100 | SQM | |
| 62 | 62 | S&F Anodised aluminium snap grid frame work of size 605 x 605 mm for false ceiling complete all as specified and as directed. | 100 | SQM | |
| 63 | 63 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed. | 100 | SQM | |
| 64 | 64 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with coach screws, washers, and L-type or J-type or cranked hook bolts in lieu of screw in roofs, complete all as specified and as directed. | 30 | Sqm | |
| 65 | 65 | S&F, Aluminium composite panel sheet 3mm thick PVCF of brand name 'GURIND' fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required silicon and screw as in ceiling/columns and in vertical surface complete all as specified and as directed. | 25 | Sqm | |
| 66 | 66 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. | 15 | RM | |
| 67 | 67 | S& F Mild steel sheet eaves gutters, galvanised class 3, half rounded with rounded edges, thickness of sheet 1.25 mm, dia 125 mm complete all as specified and as directed. | 15 | RM | |
| 68 | 68 | S&F in Repair Drop ends (with spigot or socket ends) Half round gutters dia mm 150mm, thickness of sheet 1.25 mm, complete all as specified and as directed. | 2 | Each | |
| 69 | 69 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. | 3.5 | Qtl | |
| 70 | 70 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing (Fe 410-W (Gde- E- 250) quality-A), complete all as specified and as directed. | 350 | Kg | |
| 71 | 71 | Taking down aluminium frame with shutter of any description, any size etc complete all as specified and as directed. | 4 | Each | |
| 72 | 72 | M&L for fabrication and fixing of aluminium paneled door with anodised aluminium frame of section 62.3x38mmx1.5mm thick shutter with top & bottom rail of section 113.4x44.45x1.50mm thick and styles, middle rails of Al section 83.50x44.45x1.50mmthick with suitable locking arrangement with lock (Make Godrej or link) 4 levers and self closing devices with rebates including jointing cleats of suitable section for fixing builders hardware fitting door spring (Make: Sandhoo/Samrat) glazing clips rubber packing for air lock purpose anodized Al strip beading screw for supply and fixing glass panes in the same shutter covered with fully selected quality tinted glass 5 mm thick or 12mm prelaminated particle board veneered on both faces with rubber packing each shutter shall be provided with 2 Nos decorative type Aluminium handle complete all as required at site and as directed. \nMake of plywood: Century/Kitply/Greenply/Nova pan. | 4.8 | Sqm | |
| 73 | 73 | Supply and fixing single leaf openable toughened full frosted/ acid washed door made with 12mm thick selected quality glass of make Atul/ Modi or equivalent as approved by GE with lock and self closing device (Top patch (Model No-IPF-2 of make- Insta or equivalent as approved by GE, Double action floor spring (Model No-IFC-8400 of make- Insta or equivalent as approved by GE, Top Pivot (Model No-IFC- GDP-105 of make -Insta or as approved by GE, Bottom and Top corner patch lock (Model No-IPL- 1 of make- Insta or equivalent as approved by GE Door handle H type 25x300mm (Model No-IGH- 55 of make. Insta or equivalent as approved by GE, and edging on 12 mm thick TOUGHENED glass as per the design approved. \nNOTE: Unit rates are deemed to be including of necessary designing charges on Computer software and imposing the same on ntoughened glass door, for Grinding charges, polishing /bevelling of edges on 12mm thick toughened, all glass specifications approved by GE and complete all as directed by Engineer-in-Charge. | 4.8 | Sqm | |
| 74 | 74 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and as directed. | 10 | Each | |
| 75 | 75 | M/L for fabrication and fixing of Aluminium window/ ventilator openable type with aluminum anodized frame of section 62.30x44.5 x1.5mm with shutter stiles rail of aluminum section of size 47.62mmx44.45x1.5 mm including jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminum strip bearing screw etc for fixing glass pans in frame shutter covered with fully selected quality tinted glass 5,5mm thick tinted glass with rubber packing complete each shutters of window shall be provided with 2 Nos 75 mm size aluminum hinges one 'D' type 100mm Al handle , Al stay 01, 2 Nos 150mm Al tower bolt with counter etc. complete all as specified and as directed by Engineer-in-Charge. | 27 | Sqm | |
| 76 | 76 | S&F for aluminium anodized grills with 6x5mm aluminium section having square gap of 100mm thick with fixing rails of channels 12-15mm complete all as specified and as directed by Engineer-in-Charge. | 27 | Sqm | |
| 77 | 77 | Demolition of Precast Concrete block walling, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and pre cast concrete articles complete all as specified and directed. | 10 | Cum | |
| 78 | 78 | M &L for precast Cement Concrete block masonry with solid blocks, Type C-1, 1:3:6 (using 20 mm crushed graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. | 10 | Cum | |
| 79 | 79 | M&L for rendering 10mm thick on fair faces of brickwork or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. | 41.6 | Sqm | |
| 80 | 80 | M&L for rendering 15mm thick on fair faces of brickwork or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. | 4.2 | Sqm | |
| 81 | 81 | S&F of PVC Decorative false ceiling frame work for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof Trusses by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long and including complete all connected specifications of items complete all as specified and directed. | 100 | Sqm | |
| 82 | 82 | M&L preparing newly plastered or unplastered surface of walls and applying two coats of cement base paint complete all as specified and directed. | 4.2 | sqm | |
| 83 | 83 | Taking down carefully aluminum/copper point wring (light, fan, socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB, DB, MCB'S, Main switch, any type etc, from control board and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and as directed. | 160 | Points | |
| 84 | 84 | M&L for point wiring with 1.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed electric cable 1100 volt (ISI Marked) with proper color coding in and including PVC casing and caping and accessories (ISI Marked) with all fittings/accessories and including PVC insulated and unsheathed electric cable 1100 volt 1.5 Sqmm FRLS (multistranded) copper conductor cable (green color) as continuous earth wire connected to common earth dolly including hard PVC boards of required size and shape and fittings, etc. covered with 3mm thick plastic laminated sheet (Make: Hylum) for one light point controlled by one one way switch, complete all as specified and as directed. \nMake of wire: Anchor/Polycab/Finolex | 95 | Point | |
| 85 | 85 | All as per srl item no 84.00 here-in-before, but for One 3 pin socket outlet, 5 Amps on independent board complete all as specified and as directed.\nMake of wire: Anchor/Polycab/Finolex. | 27 | Point | |
| 86 | 86 | All as per srl item no 84.00 here-in-before, but for One 3 pin socket outlet, 5 Amps on the same board with other switches, complete all as specified and as directed.\nMake of wire: Anchor/Polycab/Finolex. | 10 | Point | |
| 87 | 87 | M&L Point wiring with 4.0 sqmm PVC insulated unsheathed copper conductor single core copper conductor and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including concealed PVC conduit with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size and 3mm thick laminated sheet, including cutting chases to wall making good match with the existing specification complete all as specified and as directed. | 28 | Point | |
| 88 | 88 | M&L for switch piano flush button single pole one way 5 Amps complete all as specified and as directed. | 105 | Each | |
| 89 | 89 | S&F switch socket combination outlet multipurpose 5 Amps, 240 volts, AC flush type, 5 pin 5 Amps plug top complete all as specified and as directed. | 32 | Each | |
| 90 | 90 | Supply and fix switch socket outlet multipurpose 15 amps 240 Volts , AC flush type, 5 Pin suitable for inserting 2 pin 5 Amps/ 3 pin 15 Amps plug top complete all as specified and as directed. | 28 | Each | |
| 91 | 91 | Supply and fix ceiling rose surface bakelite three terminal of size 50x 24 mm, 240 Volts, AC, complete all as specified and as directed. | 44 | Each | |
| 92 | 92 | Supply & fix LED Bulk head Sirius Series, 10 W LED light, complete all as specified and as directed.\nMake : Havells/Phillips or Bajaj. | 11 | Each | |
| 93 | 93 | Supply & fix LED tube light fitting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of 1.5 Sqmm with suitable size of 18/20 watt all as specified and directed. \nMake : Havells/Phillips or equivalent in Bajaj. | 44 | Each | |
| 94 | 94 | Supply & fix linear & compact 10W E-lite LED Curve complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of 1.5 Sq mm complete all as specified and as directed.Make : Havells/Phillips Bajaj. | 10 | Each | |
| 95 | 95 | Supply and fix lamp holder insulated body with back plate suitable for batten fitting including 12 Watt LED bulb, complete all as specified and as directed.\nMake : Havells/Phillips/Bajaj.\n | 35 | Each | |
| 96 | 96 | S&F Decorative wall light ?xture made up of Polycarbonate; suitable for 7/14 W LED Bulb/ 15 W retrofit CFL (B-22 base), complete all as specified and as directed.\nMake : Havells/Phillips/Bajaj. | 21 | Each | |
| 97 | 97 | Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with single pole MCB 20 Amps 240 Volts AC complete all as specified and as directed.\nMake : Havells/Phillips/Bajaj. | 8 | Each | |
| 98 | 98 | S&F sheet metal enclosure (factory made) for distribution board double door (MCBs are to be used) Triple pole and neutral 240 volt 4 way with 200 Amps rated bus bar complete all as specified and as directed.\nMake : Havells/Phillips/Bajaj. | 1 | Each | |
| 99 | 99 | S&F sheet metal enclosure (factory made) for distribution board double door (MCBs are to be used) single pole and neutral 240 volt 8 way with 200 Amps rated bus bar complete all as specified and as directed.\nMake : Havells/Phillips/Bajaj. | 4 | Each | |
| 100 | 100 | Supply & Fixing in repair sub main wiring with two runs of single core 6.0 Sq mm PVC insulated sheathed stranded copper conductor 650 / 1100 V grade with colour code and one run of 6.0 Sq mm ( 22 / 0.3 mm ) single core PVC insulated copper conductor green colour cable as earth continuity conductor drawn in and including PVC casing and caping of suitable size with all necessary fixture/accessories, complete all as specified and as directed. \nMake of wire: Anchor/Polycab/Finolex.\n(Note :Two runs of 6.0 Sqmm copper cable, one run of earth wire of 6.0 Sqmm copper cable shall be measured & paid as one length.) | 29 | RM | |
| 101 | 101 | S&F MCB TPN, 63 Amps, 415 Volts with breaking capacity of 16 kA \"C\" curve complete all as specified and as directed. | 1 | Each | |
| 102 | 102 | S&F MCB SP 5 to 32 Amps, 240 Volts with breaking capacity of 16 KA C curve complete all as specified and as directed. | 36 | Each | |
| 103 | 103 | S&F MCB SPN 32 Amps, 240 Volts with breaking capacity of 16 KA C curve complete all as specified and as directed. | 6 | Each | |
| 104 | 104 | S&F Exhaust fans AC single phase 230/240 V of size 300mm sweep complete all as specified and as directed. \nMake : Phillips/Havells/Bajaj/CG | 10 | Each | |
| 105 | 105 | S&F decorative Integral Post Top Lanterns gate light, complete all as specified and as directed.\nMake : Phillips/Havells/Bajaj/CG | 2 | Each | |
| 106 | 106 | S&L XLPE insulated electrical LT cable, armoured and PVC sheathed, heavy duty, 1100 Volts grade, with aluminum conductor of size 35 sqmm 3.5 Core complete all as specified and as directed. | 26 | RM | |
| 107 | 107 | M & L for providing earthing complete with Galvanished steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (Earth pit not less than 3.00 meter deep below normal ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and including Galvanised earth lead wire 0.4mm dia by means of bolt, nuts, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B1 angle iron 40x40x3mm frame, pit in PCC 1:2:4 type B1 cover 40mm reinforced with XPM weight not less than 4 kg/Sqm and 6mm dia bar handle, including excavation and earth work in any type of soil, charcoal dust and salt light grade GI watering pipe 20mm bore with funnel and wire mesh mid grade GI protection pipe 15mm bore 5 mtrs long and earth wire up to main earthing of pole complete all as shown in electrical plate No 3 of MES SSR Part -I, all as directed and as specified. | 1 | Each Job |
AI Tender Summary
Tender Timeline
Jun 04, 2020
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 11, 2020
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 11, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 13, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender