Construction Of Nhave Bhaytandel Samajik Sabhagruha Samajik Sabhagruha At Nhave , Taluka- Roha
Tender Value
6.93 Lakhs
Estimated cost
Bid Submission
27 May 2020
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Taluka-Roha,Dst-Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Nhave Bhaytandel Samajik Sabhagruha Samajik Sabhagruha At Nhave , Taluka- Roha
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-May-2020 | Date Corrigendum | Date | 25-May-2020 |
| 2 | 26-May-2020 | DateCorrigendum | Date | 27-May-2020 |
BOQ
| Name of Work:-Construction of Nhave Bhaytandel Samajik Sabhagruha Samajik Sabhagruha at Nhave , Taluka- Roha. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Item No.1 - Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) | 23.1372 | Cmt | |
| 2 | 2 | Item No.2 - Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. | 10.3447 | Cmt | |
| 3 | 3 | Item No.3 - Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand | 6.80644 | cmt | |
| 4 | 4 | Item No.4 - Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. | 15.8175 | cmt | |
| 5 | 5 | Item No.5 - Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. | 1.2654 | cmt | |
| 6 | 6 | Item No.6 - Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. | 12.5569 | cmt | |
| 7 | 7 | Item No.7 - Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete | 20.4996 | cmt | |
| 8 | 8 | Item No.8 - Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. | 0.35443 | cmt | |
| 9 | 9 | Item No.9 - Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. | 0.129586 | M.T. | |
| 10 | 10 | Item No.10 - Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand | 0.126959 | cmt | |
| 11 | 11 | Item No.11 - Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete. | 0.569 | cmt | |
| 12 | 12 | Item No.12 - Providing and fixing 6.00 mm thick ISI mark Asbestos Cement Corrugated sheet roofing including galvanised iron 'J' or 'L' hook bolts galvanised iron band bituminous G.I. washers, galvanised iron clamps, bolts, nuts and scaffolding etc. complete. | 78.02 | cmt | |
| 13 | 13 | Item No.13 - Providing and fixing 6 mm thick ISI mark Asbestos Cement ridge capping for roofing including galvanised iron hooks, bolts, galvanised iron and bituminous washers, galvanised iron clamps, bolts, nuts including scaffolding etc. complete. | 9.4 | cmt | |
| 14 | 14 | Item No.14 - Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. | 78.54 | cmt | |
| 15 | 15 | Item No.15 - Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. | 90.756 | smt | |
| 16 | 16 | Item No.16 - Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. | 78.54 | smt | |
| 17 | 17 | Item No.17 - Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. | 13.464 | smt | |
| 18 | 18 | Item No.18 - Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete | 0.0405 | Cmt | |
| 19 | 19 | Item No.19 - Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. | 45.88 | smt | |
| 20 | 20 | Item No.20 - Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. | 3.6 | smt | |
| 21 | 21 | Item No.21 - Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. | 1.89 | smt | |
| 22 | 22 | Item No.22 - Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box | 4.32 | smt | |
| 23 | 23 | Item No.23 - Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. | 5.07 | smt | |
| 24 | 24 | Item No.24 - Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. | 78.54 | smt | |
| 25 | 25 | Item No.25- Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. | 90.756 | smt | |
| 26 | 26 | Item No.26 - Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete | 1 | smt | |
| 27 | 27 | Item No.27 - Testing Charges of construction material Sand - Fineness Modulus ( Sieve Analysis ),Silt &\nClay Content | 1 | No | |
| 28 | 28 | Item No.28 - Testing Charges of construction material Cement - Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness | 1 | No | |
| 29 | 29 | Item No.29 - Testing Charges of construction material Bricks - Water Absorbtion, Compressive Strength, Efflorescence | 1 | No | |
| 30 | 30 | Item No.30 (A)- Royalty Charges of materials For Sand | 20.61 | Cmt | |
| 31 | 31 | Item No.30 (B)- Royalty Charges of materials For other material | 41.25 | Cmt | |
| 32 | 32 | Item No.31:- Add For Labour Insurance 1 % | BI01010001010000000000000515BI0100001145 | 1 | ins |
| 33 | 33 | Item No.32:- Reimbrsement of GST 12 % | BI01010001010000000000000515BI0100001146 | 1 | Gst |
AI Tender Summary
Tender Timeline
May 26, 2020
11:30 IST
Tender Published
Tender notice published.
Completed
May 25, 2020
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 27, 2020
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 27, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 28, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender