Eemhdii/Nit2sl7/2020-21 Gokarna-Chiruti Road From 2 . 00 Kmp To 4 . 00 Kmp , 4 . 60 Km To 4 . 90 Km And 5 . 70 Km To 6 . 50 Km Patch Repair Under Murshidabad Highway Division No . Ii During The Year 2020-21
Tender Value
19.03 Lakhs
Estimated cost
Bid Submission
29 May 2020
0 days left
EMD
38066
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gokarna → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Eemhdii/Nit2sl7/2020-21 Gokarna-Chiruti Road From 2 . 00 Kmp To 4 . 00 Kmp , 4 . 60 Km To 4 . 90 Km And 5 . 70 Km To 6 . 50 Km Patch Repair Under Murshidabad Highway Division No . Ii During The Year 2020-21
BOQ
| Name of Work : Gokarna-Chiruti Road from 2.00 Kmp to 4.00 Kmp, 4.60 Km to 4.90 Km and 5.70 Km to 6.50 Km patch repair under Murshidabad Highway Division No.II during the year 2020-21. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). \nOn Bituminous Surface (Using Bitumen Emulsion at the rate of 0.25 kg per sqm.) | 1 | 10300 | Sq.m |
| 2 | 1.1 | On Granular Surface (Using Bitumen Emulsion at the rate of 0.275 kg per sqm.) | 2 | 2000 | Sq.m |
| 3 | 2 | Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). \nFor WBM / WMM Surface: (with primer @ 0.85 kg/sqm) | 3 | 2000 | Sq.m |
| 4 | 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). \nGrading-II Aggregate (63 mm to 45 mm) Using Stone Screening Type B (11.2 mm) \nManual Means | 4 | 200 | Cum |
| 5 | 4 | Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD. | 5 | 5800 | Sq.m |
| 6 | 5 | Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). \nWith Hot Bitumen Binder (@ 6.80 kg / 10 sqm.) | 6 | 5800 | Sq.m |
| 7 | 6 | Repairing pot-holes and making up small depressions with ramming or power rolling including screening, cleaning chips or metals and washing, drying as necessary and heating the chips or metal where necessary, cutting pot holes to regular shapes with vertical edges, cleaning the disintegrated materials, heating matrix and applying tack coat (including sides), finishing the top of repaired surface levelled with adjoining area, including cost and carriage of stone aggregates and matrix, excluding cost of applying tack coat. [Tack coat is to be considered separately] \nWith premixed Chips or Bajrees with 54 kg of bitumen per m3 of loose net volume of stone chips using concrete mixer machine. (The payment is to be made on the basis of loose net volume of stone materials consumed in the work).\nUsing Mobile HMP (Light duty) | 7 | 35 | Cum |
| 8 | 7 | Add : GST @ 12% | 8 | 1.68254e+06 | % |
| 9 | 8 | Add : Labour Welfare Cess @ 1% | 9 | 1.88444e+06 | % |
AI Tender Summary
Tender Timeline
May 14, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMay 29, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 01, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender