Renovation Of Hall At 1St Floor , Export Promotion Counsil , Kesarbagh , Lucknow .
Tender Value
1.46 Crore
Estimated cost
Bid Submission
21 May 2020
0 days left
EMD
16500
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Hall At 1St Floor , Export Promotion Counsil , Kesarbagh , Lucknow .
BOQ
| Name of Work:RENOVATION OF HALL AT 1ST FLOOR, EXPORT PROMOTION COUNSIL, KESARBAGH, LUCKNOW. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.(DSR 15.7.3) | 9.9 | Cum | |
| 2 | 2 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing Compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I (DSR : 12.45.1) | 16.8 | Sqm | |
| 3 | 3 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit (DSR : 12.52.3) | 66.6 | Sqm | |
| 4 | 4 | Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated hollock wood (DSR 9.36.1) | 0.50272 | Cum | |
| 5 | 5 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 18 mm thick (DSR : 9.17.2) | 132 | Sqm | |
| 6 | 6 | Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. (DSR 9.38) | 132 | Sqm | |
| 7 | 7 | French spirit polishing : Two or more coats on new works including a coat of wood filler (DSR 13.68.1) | 132 | Sqm | |
| 8 | 8 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately). (DSR 21.18) | 2.205 | Sqm | |
| 9 | 9 | Providing and fixing ISI marked nickle plated brass fancy Handle with necessary screw etc all complete. (M/R) | 2 | Nos | |
| 10 | 10 | Providing and fixing ISI marked bright finished brass floor door stopper with necessary screw etc all complete. (DSR 9.82.1) | 1 | Nos | |
| 11 | 11 | Providing and fixing bright finished brass night latch of approved quality including necessary screw etc all complete. (M/R) | 1 | Nos | |
| 12 | 12 | Providing and fixing 12mm thk frameless toughened glass partitions of approved brand and manufacturar, including providing and fixing of all fixing arrangement and making necessary holes etc for fixing of required fittings etc all complete as per direction of Engineer-in-charge. (A/R) | 28.8 | Sqm | |
| 13 | 13 | Providing & fixing frosted glass film on toughened glass etc all complete. | 24.804 | Sqm | |
| 14 | 14 | Providing and fixing of blinds on window including all fixtures and arrangement etc all complete. (M/R) | 31.005 | Sqm | |
| 15 | 15 | Supply & fixing of first radiant/first line tufted 1/10\" loop carpet tile 100% PAG soloution dyed aquation backing back to back modified bitumen, 10% recycled content included, fire resistant EN 1350-1B, S1, pile height Ca 2.9 mm, total weight ca 4300gms/Sqm. pile density ca0.114gm/cm3, thermal resistant ISO 8302.0.047 m2 K/W, impact noise rating ISI10140 (1000 Hz) tile size should be (500mm x 500mm) as per the approved design as approved by the Engineer-in-charge. | 60.6 | Sqm | |
| 16 | 16 | Supply & fixing of 12mm thick wood based solid surface panel having CNC (Computer Numerical Control) cutting of World map with Deco finish painting on exposed surface & fitted with SS wall spacers as per approved design as approved by Engineer-in-charge. | 7.32 | Sqm | |
| 17 | 17 | Dismantling of AC duct made of GS sheet (size 600x300mm) | 5 | Sqm | |
| 18 | 18 | Providing & fixing of end cap of AC duct made of GS sheet. | 1 | No | |
| 19 | 19 | P/Fixing of AC duct made of GS sheet (size 600x200mm) | 5 | Rmt | |
| 20 | 20 | Providing & fixing of AC grill etc all complete. | 18 | Rmt | |
| 21 | 21 | Making 6\"x6\" space for LED light on false ceiling | 12 | Nos | |
| 22 | 22 | Carriage of Lime, moorum, building rubbish by manual labour including loading, unloading & stacking upto 100mts lead. (DSR : 1.2.1) | 9.9 | Cum | |
| 23 | 23 | \"Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by\nmechanical transport including loading, transporting, unloading to approved municipal dumping ground for\nlead upto 10 km for all lifts, complete as per directions of Engineer-in-Charge. (DSR 1.1.18) | 9.9 | Cum | |
| 24 | 24 | ELECTRIFICATION WORK : | |||
| 25 | 25 | Wiring point for Light with 1.5 sqmm FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall partly laid in slab along with the reinforcment before concreting complete with 1.5 sqmm FLRSH copper earth contunity wire, piano typre switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc. complete in all respect as directed including matching colour wash. (Sch No 138-C &187-A ) | 10 | Nos.. | |
| 26 | 26 | S/F of Power Plug with 20 amp/250 Volt flush type modular switch and 5 pin 15A/250V flush type universal modular socket switch on concealed M.S. Box including supply of all material , labour T& P etc. required for proper completion of work (Sch no 1139-A) | 40 | Nos.. | |
| 27 | 27 | Supply and wiring of sub main 2 Nos. 2.5 sqm & 1 no. earth wire of 1.5 sqmm FR PVC insulated 1100 v. grade multistrand single core copper conductor cable in existing PVC conduit complete in all respect.(Sch no. 291) | 500 | Rmt | |
| 28 | 28 | S/F and concealing of of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints ith original resin/ adhesive to make the complete piping rigid, plastering with cement sand mortal finished to the level with matchijg colour wash including cost of all material lbour T&P etc required for proper completion of the work as per directiom and to satisfaction of Engineer in charge (Sch No. 148-A) | 50 | Rmt | |
| 29 | 29 | S/F and concealing of of 25 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints ith original resin/ adhesive to make the complete piping rigid, plastering with cement sand mortal finished to the level with matchijg colour wash including cost of all material lbour T&P etc required for proper completion of the work as per direction and to satisfaction of Engineer in charge (Sch No. 149-A) | 100 | Rmt | |
| 30 | 30 | S/F of Telepone wire 2 pair 0.5 sqmm solid conducter , PE insulated sheiled with fine finned copper braid and protected with PVC sheath in the existing surface /recessed steel/PVC conduit as required DSR(1.182)/2018 | 100 | Rmt | |
| 31 | 31 | providing drawing connecting and testing of Enhanced Category 4pair lan local area network cable 24 AWG conducter performances specifide 5E U L and CUL Listed in existing PVC Conduit .(CAT-6 Network cable) (DSR-1.53)/2018 | 300 | Rmt | |
| 32 | 32 | Supplying & Drawing co-axial T.V.cable RG-grade , 0.7 mm. solid copper conducter , PE insulated shieled with fine finned copper braid and protected with PVC sheath in the existing surface/recessed stell/ PVC conduit as required . For T.V. socket outlet DSR(1.19)/2018 | 50 | Rmt | |
| 33 | 33 | Supply & fixing of LED strip Light all completed as per drawing and specification and direction of engineer incharge .make - Klite, Havells, Phillips equivalent. NSI | 40 | Rmt | |
| 34 | 34 | Supply & fixing of LED strip Driver all completed as per drawing and specification and direction of engineer incharge .make - Klite, Havells, Phillips equivalent. NSI | 8 | Nos.. | |
| 35 | 35 | Supply fixing of recess mounting round 18 watt COB LED spot light having powder coated die cast aluminium housing with heat sink, diffuser/reflector and driver set completed in all respect . NSI | 30 | Nos.. | |
| 36 | 36 | Supply fixing of Hanging LED light having powder coated die cast aluminium housing with heat sink, diffuser/ reflector and driver set completed in all respect . NSI | 1 | Nos.. | |
| 37 | 37 | Supply & Fixing of 24 Port switch completed in all respect. NSI | 1 | Nos.. | |
| 38 | 38 | Supply & Fixing of 4 Port Rack completed in all respect. NSI | 1 | Nos.. | |
| 39 | 39 | Supply Installation testing 7 comissioning of modular plate type white RJ 45CAT DATA/ Telephoneoutlet/ information outlets ETL VERIFIED TO MEET OR EXCEED TIA/EIA Category 6 requirments, universal wiring lebel permitting to either T568A or T568B,UL listed , for complete in all respect with cover plate, grid plate, screws, MS box, etc with connections as required with 2 nos RJ-45 Data outlet . NSI | 20 | Nos.. | |
| 40 | 40 | Supply anfd fxing of 6 Amp to 32 Amp SPMCB (10KA) C Curve Cat-A4 pole isolater .CAT-A S.I. 1002(A) | 36 | Nos.. | |
| 41 | 41 | Supply fixing of 63 Amp 4 pole isolater.CAT-A S.I. 1007(B) | 1 | Nos.. | |
| 42 | 42 | Supply fixing of Surface/ flush mounting 12 ways TPN distribution board with additional metal door without MCB completed in all respect , as directed at site by Engineer in charge CAT-A S.I. 1029(A) | 1 | Nos.. | |
| 43 | 43 | PART : 'B' | |||
| 44 | 44 | Removing of dry or oil bound distemper by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR-13.91) | 150.563 | Sqm | |
| 45 | 45 | Providing and applying white cement based putty of average thickness of 1 mm of approved brand and manufacturer over the wall surface to prepare the surface even and smooth including cost of materials, labours T&P etc all complete. (PWD NS/DSR 13.80) | 150.563 | Sqm | |
| 46 | 46 | Finishing wall with Premium acrylic smooth paint with silicone additives ofrequired shade (two or more coat) etc all complete. (PWD Sch 13.47.1) | 150.563 | Sqm | |
| 47 | 47 | Painting or Varnishing of two coat on iron works in small areas or wood work with readymixed enamel paint of superior quality including all materials, labours, T&P etc all complete. ( PWD sch 643) | 30.75 | Sqm | |
| 48 | 48 | Cutting of MS window partly for fixing Aluminium window including cutting, grinding & prepair to fixing of aluminium window, scaffolding for approach, and disposl of waste materials etc all complete. | 3 | Nos | |
| 49 | 49 | P/Fixing of aluminium door/window with average coating 20 micron etc all complete. | 6.75 | Sqm | |
| 50 | 50 | Providing & fixing of glass panes (4.8 to 5.7mm thick) ISI marked quality, putty, brads and including supply of all materials, labours, T&P etc all complete. | 15.375 | Sqm | |
| 51 | 51 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately). (DSR 21.18) | 6.615 | Sqm | |
| 52 | 52 | Providing and fixing ISI marked nickle plated brass fancy Handle Ozone make with necessary screw etc all complete. (M/R) | 6 | Nos | |
| 53 | 53 | Providing and fixing ISI marked bright finished brass floor door stopper with necessary screw etc all complete. (DSR 9.82.1) | 3 | Nos | |
| 54 | 54 | Providing and fixing bright finished brass night lock Ozone make including necessary screw etc all complete. (M/R) | 3 | Nos | |
| 55 | 55 | Providing and fixing 12mm thk frameless toughened glass partitions of approved brand and manufacturar, including providing and fixing of all fixing arrangement and making necessary holes etc for fixing of required fittings etc all complete as per direction of Engineer-in-charge. (A/R) | 16.785 | Sqm | |
| 56 | 56 | Providing and fixing of blinds on window including all fixtures and arrangement etc all complete. (M/R) | 15.375 | Sqm | |
| 57 | 57 | Providing & fixing film on toughened glass etc all complete. | 18.72 | Sqm | |
| 58 | 58 | Making 2'x2' space in false ceiling for ceiling light including fixing of aluminium tube on sides for supports & finish with POP etc all complete. | 6 | Nos | |
| 59 | 59 | Making 6\"x6\" space for LED light on false ceiling including cutting of false ceiling finish with POP etc all complete. | 12 | Nos | |
| 60 | 60 | ELECTRIFICATION WORK : | |||
| 61 | 61 | Wiring Point for light 1.5 Sqmm FR PVC insulated multistrand single core copper conductor cable in heavy gauge PVC conduit with 1.5 sqmm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit (Sch. 131-C & 187-A) | 15 | Nos.. | |
| 62 | 62 | Wiring Point for fan/fresh air Fan (Light duty exhaust Fan) with 1.5 sqmm FR PVC conduit with 1.5 sqmm FR PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit (Sch. Nos.. 133-C & 187-A) | 6 | Nos.. | |
| 63 | 63 | Wiring Point for plug 1.5 sqmm FR PVC insulated multistrand single wire copper conductor cable but in PCV conduit with 1.5 sqmm FR PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit (Sch. Nos.. 134-C & 187-C) | 3 | Nos.. | |
| 64 | 64 | S/F of Power Plug with 15 amp/250 Vatt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. Box of 175mmx 100 mmx 50 mm size with pheNos.lic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washe(Sch no 1139) | 3 | Nos.. | |
| 65 | 65 | Supply and wiring of sub main with two Nos.. FR PVC insulated 1100 v. grade multistrand single core copper conductor cable in 20mm dia | |||
| 66 | 66 | a) 2.5 sqmm (1304-C) | 50 | Rmt | |
| 67 | 67 | b) 4.0 sqmm(216-C) | 40 | Rmt | |
| 68 | 68 | Supply & fixing of 36 Watt to 46 Watt indoor recess mounting LED Square fitting ………….. Completed | 6 | Nos.. | |
| 69 | 69 | S/F of 6 to 8 watt LED………completed | 12 | Nos | |
| 70 | 70 | S/F of Electronic fan dimmer, 300/400 w ISI marked… complete (Sch. No. 1203-B) | 3 | Nos.. | |
| 71 | 71 | S/F of 1200 mm Sweep Ceiling Fan made with double ball bearing…complete item (Make Khaitan, Polar, Bajaj etc.) | 3 | Nos.. | |
| 72 | 72 | S/F of 300 mm Fresh air fan .. Complete Make Bajaj, Khaitan, Polar. | 3 | Nos.. |
AI Tender Summary
Tender Timeline
May 14, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMay 21, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 22, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender