Bharat Electronics Limited-BEL has published Providing Modular Furniture For Four Floors Of Pdic Building In Be Estate . . Submission Date for this Tender is 03-06-2020. Moduler Furniture Tenders in ES/Contracts, BEL, Bangalore Karnataka. Bidders can get complete Tender details and download the document.
| Name of Work: Providing Modular Furniture for Four Floors of PDIC Building in BE Estate. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supplying and erection of modular work counter table tops of varying lengths of minimum 570 mm wide at 750mm high as per furniture layout indicated on drawing Nos.9810 0 02919,9810 0 02920,9810 0 02921,9810 0 02922 and 9810 0 03631. The table top of the work counter shall be 25mm thick mdf board provided with 0.7mm post lamination on top and 0.5mm balancing lamination at bottom and supported from the partitions with powder coated MS brackets and shall\n have post formed edges on front side and all exposed edges shall be finished with edge binding tape of matching shade. (Note: Rates quoted shall be for the complete finished work including all components mentioned above and fixing in position. Actual area of table tops in plan will be measured for payment. Modular partitions from which table tops of work stations are supported are measured separately.) | 25 | sqm | |
| 2 | 2 | Supplying and erection of gable ends of 570mm wide for Workstations/Counters at 750mm high as per furniture layout indicated on drawing Nos.9810 0 02918,9810 0 02919,9810 0 02920 and9810 0 02922. Verticle support and gable end shall be 25mm thick MDF board provided with 0.7mm post lamination on both sides. The verticle support of work counters shall have post formed edges on front side and all exposed edges shall be finished with edge binding tape of matching shade. (Note: Rates quoted shall be for the complete finished work including all components mentioned above and fixing in position. Actual area of verticle support as seen in elevation will be measured for payment.) | 85 | sqm | |
| 3 | 3 | Supplying and erection of gable ends of 900mm wide for Lab areas at 750mm high as per furniture layout indicated on drawing No.9810 0 02918. Verticle support and gable end shall be 25mm thick MDF board provided with 0.7mm post lamination on both sides. The verticle support of work counters shall have post formed edges on front side and all exposed edges shall be finished with edge binding tape of matching shade. (Note: Rates quoted shall be for the complete finished work including all components mentioned above and fixing in position. Actual area of verticle support as seen in elevation will be measured for payment.) | 5 | sqm | |
| 4 | 4 | Supplying & erection of modular work counter table tops of varying length of 900mm wide at 750mm high as per furniture layout indicated on drawing No.9810 0 02918. The table top of the work counter shall be 25mm thick mdf board having post formed edges and provided with 0.7mm post lamination on top & with 0.5mm balancing lamination at bottom & supported from the partitions with powder coated MS brackets & shall consist of approved make powder coated moulded sliding key board tray for every 1500 mm length of work counter shall have post formed edges on front side and all exposed edges shall be finished with edge binding tape of matching shade.900mm wide table top at 750 mm high\n shall be supported on 900mm wide 25mm thick laminated MDFboard placed vertically and placed at 1.5m centre to centre. (Note: Rates quoted shall be for the complete finished work including all components mentioned above and fixing in position. Quoted rate shall also include the charges for bracket, removal and refixing of existing tiles in existing vertical partitions. The actual area of table top in plan will be measured for payment and 900 mm wide support as seen in elevation on which the table top of work stations are supported will be measured saperately.) | 10 | sqm | |
| 5 | 5 | Supplying and erection of 1200 mm (appx.) high self supporting modular tile based partitions as per layout indicated on drawing Nos.9810 0 02918,9810 0 02919,9810 0 02920 and 9810 0 02922. The frame work of the partitions shall be made out of MS(CRCA)/ aluminium extruded, section of standard guage and with approved powder coated finish and shall have a minimum width of 70 mm measured outer- to- outer of double walled MDF panels. The vertical frames of the partitions shall be spaced at 600 mm to 750 mm intervals as per requirement and all exposed surfaces of partitions shall be provided with aluminium/MS(CRCA) trim plates. Provisions shall be made in the horizontal (2 slots) and vertical\n (4 slots) frame work for taking electrical and communication cables / wires and for supporting table tops of work stations wherever required. The double walled panels of the partitions below and above table top shall be made out of exterior grade mdf board of minimum thickness of 8mm with min 0.55mm post lamination on front surface and 0.5mm thick balancing lamination on backside, the exposed edges shall be finished with edge binding tape of approved colour and shade (overall thickness shall not be less than 0.5mm). MS(CRCA)/ aluminium extruded. Raceways including MS(CRCA) / aluminium extruded cover plate of standard gauge shall be provided though out at skirting level and also for a length of 900mm above and below table top level at the specified location as approved by Engineer-in-charge.\nThickness of partition shall accommodate for housing MS switch boxes of 50mm thickness inside the partition. Necessary arrangements shall be provided in the raceways for fixing switches, sockets and communication accessories as required. Provision shall be made in the frame work of partitions for facilitating extension in both horizontal and verticle directions.8mm thick mdf board in modular partition sahll be provided with suitable and approved fabric for pinup board in one panel of minimum size 600x450 mm and provided with suitable lamination for marker board of size 600x450 mm on the inner surface of every AGM/ADVISOR/CSO TABLE, SR.DGM/DGM TABLE, MANAGER /DY. MANAGER'S WORKSTATION,EXECUTIVE WORKSTATION, PA/ STAFF TABLE,WORK COUNTERS. Each AGM/ADVISOR/CSO TABLE, SR.DGM/DGM TABLE, MANAGER /DY. MANAGER'S WORK STATION,EXECUTIVE WORKSTATION, \nPA/ STAFF TABLE,WORK COUNTERS shall be provided and fixed with the one no 600mm long powder coated MS/Alu accessory rail for each work station. Each work station shall be provided with the name plate mae out of powder coated MS Sheet with the sliding arrangement in accesory rail with the provision to insert printed name plate with lock guides above top level. One number powder MS CPU trolley of 1.5mm (min) thickness with the four castors rested on floor and also mounted on modular partition bellow table top level of matching shade and approved design for each work\n station/table and counters (Note: Rate to be quoted shall be for the complete finished work including all materials and fixing,excluding table tops,switches and sockets. Area of partition as seen in elevation will be measured for payment.) | 805 | sqm | |
| 6 | 6 | Supplying and erecting AGM/CSO tables having semi-circular edge on one side supported on MS Circular leg having powder coated finish and the other square edge supported on MS (CRCA)/aluminium extruded frame work of partitions. The table top shall be of 25 mm thick mdf board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination at the bottom with post formed edges. The table shall be provided with the leg board made out of 18 mm thick mdf board laminated with matching shade laminate of the table top of 0.7 mm thk and all exposed edges to be finished with edge binding tape of matching shade and design provided on longitudinal direction which will also form a support to the table top.The front table shall be of size 2100 x900 mm and at 750 mm high with a return table of size\n 1200 x 570 x 750 mm.The table top shall be made out of 25mm thick mdf board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination at the bottom with post formed edges.The table shall be provided with approved make powder coated moulded sliding key board tray with provision for mouse pad and one number CPU trolley with castors. One pannel each of size 600 x 450 mm for pinup board and for marker board shall be provided in partitions of executive tables.(Note: The rate to be quoted shall for the complete finish work including side table, ms brackets etc., but excluding modular partitions.) | 9 | nos | |
| 7 | 7 | Supplying and erecting SR.DGM/ DGM tables having semi-circular edge on one side supported on MS Circular leg having powder coated finish and the other square edge supported on MS (CRCA)/aluminium extruded frame work of partitions. The table top shall be of 25 mm thick mdf board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination at the bottom with post formed edges. The table shall be provided with the leg board made out\n of 18 mm thick mdf board laminated with matching shade laminate of the table top of 0.7 mm thk and all exposed edges to be finished with edge binding tape of matching shade and design provided on longitudinal direction which will also form a support to the table top.The front table shall be of size 1800 x750 mm and at 750 mm high with a return table of size 1200 x 570 x 750 mm.The table top shall be made out of 25mm thick mdf board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination at the bottom with post formed edges.The table shall be\n provided with approved make powder coated moulded sliding key board tray with provision for mouse pad and one number CPU trolley with castors. One pannel each of size 600 x 450 mm for pinup board and for marker board shall be provided in partitions of executive tables.(Note: The rate to be quoted shall for the complete finish work including side table, ms brackets etc., but excluding modular partitions.) | 13 | nos | |
| 8 | 8 | Supplying and erecting PA table having semi-circular edge on one side supported on MS Circular leg having powder coated finish and the other square edge supported on MS (CRCA)/aluminium extruded frame work of partitions. The table top shall be of 25 mm thick mdf board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination at the bottom with post formed edges. The table shall be provided with the leg board made out of 18\n mm thick mdf board laminated with matching shade laminate of the table top of 0.7 mm thk and all exposed edges to be finished with edge binding tape of matching shade and design provided on longitudinal direction which will also form a support to the table top.The front table shall be of size 1500 x600 mm and at 750 mm high with a return table of size 1200 x 570 x 750 mm.The table top shall be made out of 25mm thick mdf board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination at the bottom with post formed edges.The table shall be\n provided with approved make powder coated moulded sliding key board tray with provision for mouse pad and one number CPU trolley with castors. One pannel each of size 600 x 450 mm for pinup board and for marker board shall be provided in partitions of executive tables.(Note: The rate to be quoted shall for the complete finish work including side table, ms brackets etc., but excluding modular partitions.) | 13 | nos | |
| 9 | 9 | Supplying and erection of modular work station table tops for Manager's/Dy.Manager's of over all size 2100x1500x570 mm as per layout indicated on drawing Nos.9810 0 02918,9810 0 02919,9810 0 02920 and 9810 0 02922 .The table top of the work stations shall be 25mm thick MDF board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination on the bottom with post formed edges supported from the partitions with MS brackets.The front table shall be provided with leg board made out of 18mm thk mdf board laminated with matching shade laminate of\n the table top of 0.7mm thk and the exposed edges to be finished with edge binding tape of matching shade and design provided on longitudinal direction which will also form a support to the table top.Workstations shall also be provided with a front table of size 1500 x 600 x 25 mm thick MDF board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination on the bottom with post formed edges. Table top having semicircular edge on one side shall be supported on single leg having powder coated finish & other edge connected to the table top of the\n workstation. The table shall be provided with approved make powder coated moulded sliding key board tray with provision for mouse pad and one number CPU trolley with castors. One pannel each of size 600 x 450 mm for pinup board and for marker board shall be provided in partitions of Scientist work station. (Note: The rate to be quoted shall for the complete finish work including side table, ms brackets etc., but excluding modular partitions.) | 21 | nos | |
| 10 | 10 | Supplying and erection of modular work station table tops for Engineers of size 1800X1800mm (consisting of one pentagon of 900x900mm and table top of size 900x570mm -2 Nos ) as per layout indicated on drawing Nos.9810 0 02918,9810 0 02919,9810 0 02920 and9810 0 02922 .The table top of the work stations shall be 25mm thick MDF board 570mm wide provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination on the bottom with post formed edges & supported from the partitions with MS brackets. All exposed surface of mdf board to be finished with the matching shade. The table shall be provided with approved make powder coated moulded sliding key\n board tray with provision for mouse pad and one number CPU trolley with castors. One panel each of size 600mm x450 mm for pinup board and for marker board shall be provided in partition of Executive workstation (Note: The frame work of partitions from which table tops of work stations are supported are measured separately. Rates quoted shall before the complete finished work including all components mentioned above and fixing in position.Gable ends are to be measured seperately for payment) | 50 | nos | |
| 11 | 11 | Supplying and erection of modular work station table tops for Engineers of size 1500X1500mm (consisting of one pentagon of 900x900mm and table top of size 600x570mm -2 No's) as per layout indicated on drawing Nos.9810 0 02918,9810 0 02919,9810 0 02920 and9810 0 02922 .The table top of the work stations shall be 25 mm thick MDF board 570 mm wide provided with 0.7mm thick post lamination on top and 0.5 mm thick balancing lamination on the bottom with post formed edges & supported from the partitions with MS brackets. All exposed surface of mdf board to be finished with the matching shade. The table shall be provided with approved make powder coated moulded sliding key\n board tray with provision for mouse pad and one number CPU trolley with castors. One panel each of size 600mm x450mm for pinup board and for marker board shall be provided in partition of Executive workstation (Note: The frame work of partitions from which table tops of work stations are supported are measured separately. Rates quoted shall before the complete finished work including all components mentioned above and fixing in position.Gable ends are to be measured seperately for payment) | 46 | nos | |
| 12 | 12 | Supplying & erection of modular work counter table tops of length 1500X570 mm wide and at 750 mm high as per furniture layout indicated on drawingNos.9810 0 02918,9810 0 02919,9810 0 02920 and9810 0 02922. The tabletop of the work counter shall be 25 mm thick mdf board having post formed edges and provided with 0.7 mm post lamination on top & with 0.5mm balancing lamination at bottom & supported from the partitions with powder coated MS brackets .The table shall be provided with approved make powder coated / moulded sliding key board tray with provision for mouse pad\n and one nomber CPU trolley with castors. One panel each of size 600mm x450mm for pinup board and for marker board shall be provided in partition. The exposed edges of the table top finished with edge binding tape of matching shade and design.(Note: The modular partitions from which table tops of work stations are supported are measured separately. Rates quoted shall be for the complete finished work including all components mentioned above and fixing in position.) | 20 | nos | |
| 13 | 13 | Supplying & erection of modular work counter table tops of length 1800X570mm wide at 750mm high as per furniture layout indicated on drawing Nos.9810 0 02918,9810 0 02919,9810 0 02920 and9810 0 02922. The tabletop of the work counter shall be 25 mm thick mdf board having post formed edges and provided with 0.7 mm post lamination on top & with 0.5mm balancing lamination at bottom & supported from the partitions with powder coated MS brackets .The table shall be provided with approved make powder coated / moulded sliding key board tray with provision for mouse pad and\n one nomber CPU trolley with castors. One panel each of size 600mm x450mm for pinup board and for marker board shall be provided in partition. The exposed edges of the table top finished with edge binding tape of matching shade and design.(Note: The modular partitions from which table tops of work stations are supported are measured separately. Rates quoted shall be for the complete finished work including all components mentioned above and fixing in position.) | 21 | nos | |
| 14 | 14 | Supplying storage pedestal unit of approximate size 630 x 455 x 560 mm,consisting of one number of pencil tray and three number of drawers and supported on casters. The storage unit shall be made out of 18 mm thick mdf board with 0.55mm thick post lamination on all exterior surfaces and 0.5mm thick balancing lamination on all interior surfaces and\n drawers. The drawers shall be made out of Ebco make or equalent (meta box) full panel drawer unit sliding arrangement of hight 86mm,86mm,250mm. Ebco/Hetich make SS handles and locking arrangements. The front side of top panel of storage pedestal unit shall have post formed edges and other three side shall have pvc lipping as required. | 450 | nos | |
| 15 | 15 | Supplying and fixing sliding door units of size 570mm wide and 750mm height having one horizontal shelf & of varying length as required & made out of 18mm thick mdf board for all exterior & interior, horizontal/vertical panels. with the exposed surfaces shall be provided with 0.55 mm (min) thick post lamination & internal surfaces with 0.5mm thick balancing lamination. Each sliding door unit shall be of 900mm width (appx.) having two sliding shutters of width 450mm each (appx.) & shutters shall be made out of 18mm thick laminated mdf board having approved make sliding arrangement of Ebco/Hetich, the Structure of the sliding door unit shall be assembled using Mini fix fastners ( Male\n screws with lock ) arrangement and Ebco/Hetich make handles and locking facilities. The front side top panel of sliding door unit shall have post formed edges and other three side shall have pvc lipping as required. (Note: Rate to be quoted shall be for the complete finished work including all materials & labour. Area of sliding door unit as seen in elevation shall be measured for payment).(Conventional fixing arrangement shall not be used and Only standard fasteners of Mini fix of make Ebco /Hetich shall be used). | 50 | sqm | |
| 16 | 16 | Supplying and fixing sliding door units of size 570 mm wide and 1200 mm height having two horizontal shelf & of varying length as required & made out of 18mm thick mdf board for all exterior & interior, horizontal/vertical panels. with the exposed surfaces shall be provided with 0.55 mm (min) thick post lamination & internal surfaces with 0.5mm thick balancing lamination. Each sliding door unit shall be of 900 mm width (appx.) having two sliding shutters of width 450\n mm each (appx.) & shutters shall be made out of 18 mm thick laminated mdf board having approved make sliding arrangement of Ebco/Hetich, the Structure of the sliding door unit shall be assembled using Mini fix fastners ( Male screws with lock ) arrangement and Ebco/Hetich make handles and locking facilities. The front side top panel of sliding door unit shall have post formed edges and other three side shall have pvc lipping as required. (Note: Rate to be quoted\n shall be for the complete finished work including all materials & labour. Area of sliding door unit as seen in elevation shall be measured for payment).(Conventional fixing arrangement shall not be used and Only standard fasteners of Mini fix of make Ebco /Hetich shall be used). | 295 | sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
