| 1 | 1 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. | | 1025 | Sqm |
|---|
| 2 | 2 | M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. | | 200 | Sqm |
|---|
| 3 | 3 | M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement and fixing of chicken wire gauge where directed complete all as specified and directed.\nNote : WPC and chicken wire gauge will be measured and paid separately. | | 725 | Sqm |
|---|
| 4 | 4 | Supply only integral liquid water proofing compound complete all as specified and directed.\nMake : Pidilite/Sika | | 27 | Ltrs |
|---|
| 5 | 5 | Supply only chicken wire mesh 22 gauge of size not less than 20X20mm complete all as specified and directed. Make : Swastik or equivalent as approved | | 10 | Sqm |
|---|
| 6 | 6 | M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. | | 100 | Sqm |
|---|
| 7 | 7 | M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed.\nMake of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty.\nNotes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. | | 1045 | Sqm |
|---|
| 8 | 8 | Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.\nMake of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality].\nMake of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH) | | 200 | Sqm |
|---|
| 9 | 9 | Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.\nMake of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality].\nMake of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH) | | 100 | Sqm |
|---|
| 10 | 10 | Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.\nMake of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality].\nMake of Exterior Emulsion : Asian (ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR) | | 745 | Sqm |
|---|
| 11 | 11 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed. | | 20 | Each |
|---|
| 12 | 12 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed. | | 20 | Each |
|---|
| 13 | 13 | Taking down shutters with hardware exc. 1 sq.m but n. exc. 2 5 sq.m each complete all as specified | | 20 | Each |
|---|
| 14 | 14 | S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed. | | 50 | RM |
|---|
| 15 | 15 | S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed. | | 50 | RM |
|---|
| 16 | 16 | M&L cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed. | | 1.24 | Cum |
|---|
| 17 | 17 | S&F factory made flush shutters 35mm thick 7ply construction, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match including supply and fixing following items :\n(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos. per leaf\n(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf\n(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf\n(d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf\n(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf\nMake (Flush Shutters) : Archidply or equivalent as approved. | | 40 | Sqm |
|---|
| 18 | 18 | S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and the supply and fixing following items:\n(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf\n(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf\n(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf\n(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf | | 40 | Sqm |
|---|
| 19 | 19 | S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed complete all as specified and directed. | | 20 | Each |
|---|
| 20 | 20 | S&F powder coated 50 microns extruded aluminium doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail and 5mm thick frosted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items:\n(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf.\n(b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf\n(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf\nMake (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO\n | | 28.8 | Sqm |
|---|
| 21 | 21 | Taking down steel windows with frames n. exc 2.0 sq.m incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed. | | 110 | Each |
|---|
| 22 | 22 | Providing and fixing aluminium sliding windows with 50 micron powder coating, three track sliding windows with two glazed shutters, 5mm th tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm dia wire and 1.40mm aperature including good quality of bearing handle, locks, including EPDM gasket to render the glazing, air and water tight etc complete all as specified and as directed. catalouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom - 20957, Three track top/vertical-20958, handle-20606, Interlocking-20605, Top and Bottom - 20604. Make (Aluminium Sections) : Jindal or equivalent as approved by AO\n | | 14.4 | Sqm |
|---|
| 23 | 23 | Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :-\n(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf.\n(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf.\n(c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.\nMake (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO\n | | 14.4 | Sqm |
|---|
| 24 | 24 | Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.\nMake (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO\n | | 14.4 | Sqm |
|---|
| 25 | 25 | S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4\"X2½\") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified | | 26.9 | Kg |
|---|
| 26 | 26 | M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Make : Asian Paints/Berger/Nerolac | | 120 | Sqm |
|---|
| 27 | 27 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed as in repairs complete all as specified. | | 44.8 | Sqm |
|---|
| 28 | 28 | S&F Sheet glass 4mm thick , selected quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane including preparing and dismantling of broken glass complete all as specified. | | 28.8 | Sqm |
|---|
| 29 | 29 | S&F stainless steel curtain rod 25mm bore min thickness 1mm incl stainless steel brackets/supports/end stops etc complete fixed in position complete all as specified. | | 50 | RM |
|---|
| 30 | 30 | Demolition of cement concrete un -reinforced in ground floors/FF and pavings n.exc 15cm thickness complete all as specified. | | 2 | Cum |
|---|
| 31 | 31 | Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises | | 75 | Sqm |
|---|
| 32 | 32 | M&L for single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as approved,in neat cement including and over 20mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified.\nMake : Johnson (Daisy SF/Gloria SF) or equivalent from Kajaria/Somany as approved by AO | | 50 | Sqm |
|---|
| 33 | 33 | M&L for single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 100 mm and 9-10 mm thick in any pattern of light coloured tiles as approved, on vertical surfaces such as in skirting/dado etc, height not more than 150mm, set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.\nMake : Johnson (Daisy SF/Gloria SF) or equivalent from Kajaria/Somany as approved by AO | | 5 | Sqm |
|---|
| 34 | 34 | M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified.\nNote : Single piece should be used in steps/cills/jambs/shelves. | | 20 | Sqm |
|---|
| 35 | 35 | Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified. | | 240 | Sqm |
|---|
| 36 | 36 | S&F 18 mm thick LEAD FREE PVC Celuka ply of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.\nMake : M/s Kumar Arch (P) Ltd/Rajshree or equivalent as approved by AO | | 160 | Sqm |
|---|
| 37 | 37 | S&F 18 mm thick LEAD FREE PVC Celuka ply of both side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.\nMake : M/s Kumar Arch (P) Ltd/Rajshree or equivalent as approved by AO | | 40 | Sqm |
|---|
| 38 | 38 | S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.\nMake : M/s Kumar Arch (P) Ltd/Rajshree or equivalent as approved by AO | | 40 | Sqm |
|---|
| 39 | 39 | S&F 18 mm thick LEAD FREE PVC Celuka ply as in frames of size 75X40mm of both side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.\nMake : M/s Kumar Arch (P) Ltd/Rajshree or equivalent as approved by AO | | 180 | RM |
|---|
| 40 | 40 | S&F 6 mm thick LEAD FREE PVC ply fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. Make : M/s Kumar Arch (P) Ltd/Rajshree or equivalent as approved by AO | | 20 | Sqm |
|---|
| 41 | 41 | S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified. Make : KAFF/Hettich\n | | 90 | Each set /pair |
|---|
| 42 | 42 | S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, Make KAFF/Hettich | | 180 | Each set /pair |
|---|
| 43 | 43 | S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified. Make : Harrison (Cat No 0812) or equivalent as approved by AO | | 180 | Each |
|---|
| 44 | 44 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.\nMake : Harrison (Jasmine) or equivalent as approved by AO | | 360 | Each |
|---|
| 45 | 45 | S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified. | | 90 | R.M. |
|---|
| 46 | 46 | S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.\nMake : Hettitch or equivalent as approved. | | 100 | Each |
|---|
| 47 | 47 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.\nMake : Harrison (Jasmine) or equivalent as approved by AO | | 180 | Each |
|---|
| 48 | 48 | S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified. Make : Hettitch/Godrej/Kaff/Harrison | | 360 | Kg |
|---|
| 49 | 49 | S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified. Make : Hettitch/Godrej/Kaff/Harrison | | 20 | Each |
|---|
| 50 | 50 | S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified. Make : Hettitch or equivalent as approved. | | 48 | RM |
|---|
| 51 | 51 | S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified. | | 24 | Each |
|---|
| 52 | 52 | Repair to RCC ceiling, sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed. | | 20 | Sqm |
|---|
