| 1 | 1 | Removal of earth from the choked hill side drain and disposing it on the valley side manually as per MoRT&H technical specification Clause 3000. | BI01010001010000000000000515BI0100001113 | 6000 | metre |
|---|
| 2 | 2 | Providing, laying, spreading and compacting stoner aggregrate of specific sizes to water bound macadam specification including spreading in uniform thickness, hand picking, rolling with three wheel 80-100 KN static roller / vibratory roller in stages to proper grade and camber, apllying and brooming, stone screening and binding materials to fill up the interstices of course aggregate, watering and compacting to the required density as per MoRT&H Technical Specification Clause 404.\nWBM Grading- III | BI01010001010000000000000515BI0100001114 | 330 | cum |
|---|
| 3 | 3 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.6 kg/sqm using mechanical means as per MoRT&H Technical Specification Clause 502. | BI01010001010000000000000515BI0100001115 | 4400 | sqm |
|---|
| 4 | 4 | Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous / granular surface cleaned with Hydraulic broom as per MoRT&H Technical Specification Clause 503. | BI01010001010000000000000515BI0100001116 | 13750 | sqm |
|---|
| 5 | 5 | Providing, laying and rolling of open- graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades as per MoRT&H Technical Specification Clause 511. | BI01010001010000000000000515BI0100001117 | 13750 | sqm |
|---|
| 6 | 6 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A seal coats as per MoRT&H Technical Specifiication Clause 513. Case -I: Bitumen of VG-30 | BI01010001010000000000000515BI0100001118 | 13750 | sqm |
|---|
| 7 | 7 | Clearance of land slides in soil and ordinary rock by bull-dozer D80 A-12 180 HP and disposal of the same on the valley side as per MoRT&H Technical Specification Clause 3005.2 | BI01010001010000000000000515BI0100001119 | 3733.13 | cum |
|---|
| 8 | 8 | Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300 mm width laying fresh material in layers not exceeding 250mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as pr drawings and MoRT&H technical specification Clause 3002. | BI01010001010000000000000515BI0100001120 | 1656 | cum |
|---|
| 9 | 9 | Providing and placing gunny/ polythene ( of minimum wall thickness of 500 micron) bags filled with sand ( of minimum qty of 0.034 cum) and properly manually stitched to avoid any leakage of sand as per specification | BI01010001010000000000000515BI0100001120 | 1100 | no. |
|---|
