Special Maintenance And Repair , Misc Civil Works At 33/11 Kv Sub-Station Baikunthpur ( Selected As Adarsh S/S ) District- Mahrajganj Special M And R , Misc Civil Works At 33/11 Kv Sub-Station Baikunthpur ( Selected As Adarsh S/S ) District- Ma
Tender Value
14.72 Lakhs
Estimated cost
Bid Submission
10 Jun 2020
0 days left
EMD
44000
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mahrajganj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Maintenance And Repair , Misc Civil Works At 33/11 Kv Sub-Station Baikunthpur ( Selected As Adarsh S/S ) District- Mahrajganj Special M And R , Misc Civil Works At 33/11 Kv Sub-Station Baikunthpur ( Selected As Adarsh S/S ) District- Mahrajganj
BOQ
| Name of Work: SPECIAL M&R & MISC CIVIL WORKS AT 33/11 KV SUB-STATION BAIKUNTHPUR ( SELECTED AS ADARSH S/S) DISTRICT- MAHRAJGANJ | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11) | 20 | Sqm. | |
| 2 | 2 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres. (CSI No. 15.01) | 5.34 | CuM | |
| 3 | 3 | Dismantling of existing damaged Mud Faska over the roof. Cleaning the surface with wire brush, removal and disposal of rubbish at a distace 100 Meters also including the cost of cleaning and stacking of usable materials etc., including all labour, material required for proper completion of work. (CSI No. 15.14) | 144 | Sqm | |
| 4 | 4 | Dismantling doors or window leaves including stacking of materials as directed by the Engineer I/C within a dist. 60 M. (CSI No. 15.09) | 20 | Sqm | |
| 5 | 5 | Dismantaling doors and windows chowkhats including stacking of materials as directed by Engg-in-Charge within a distance of 60 meters. (CSI No. 15.10) | 12 | Sqm | |
| 6 | 6 | Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.5 to 2.0) and cement in proportion of 4:2:1 including supply of all materials,labour,side shuttering if required and T&P etc. required for proper completion of work. (CSI No. 5.06) | 5 | CuM | |
| 7 | 7 | Providing of Dr. Fixit 301 pidicrete URP & mixing it properley with cement in the proportion of 1:1.5 apply two coat to the prepared surface including cost of labour, material T&P etc. as required for proper completion of work as directed by E/I (NSI) | 144 | Sqm | |
| 8 | 8 | RCC work with cement approved coarse sand (F.M.1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3 including cost of all other materials labour and T&P. (CSI No. 5.21) | 10 | CuM | |
| 9 | 9 | Providing and mixing of Dr. Fixit LW+in RCC/CC/Plaster etc. 200ml per bag fo cement as directed by E/I including supply of all material, labour and T&P etc required for proper completion of work. NSI | 15 | Ltr | |
| 10 | 10 | 6 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand (1:3) minimum thickness not to be less then 10 mm including supply of all material , labour and T&P etc for proper completion of work. (CSI No. 11.17) | 144 | Sqm | |
| 11 | 11 | 3 mm thick floating coat of neat cement finish including supply of all materials, labour and T&P etc. required for proper completion of the work.( cement consumtion 0.044 bag/Sq.m.) (CSI No. 11.20) | 144 | SqM | |
| 12 | 12 | S/laying chicken mesh of (20 mm.)hexagonal heavy quality over roofs of joints of roof as per direction of the Engineer - in - charge. CSI 20.21 | 144 | SqM | |
| 13 | 13 | Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm for with special such as Tee, bend, socket, elbow etc including supply of all labour, material,T & P etc complete required for proper completion of work. (CSI No. 26.17) | 24 | RM | |
| 14 | 14 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5 meter (5ft) and lead upto 30 meter (100 ft.) and including filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 Meters (100Ft.) from the foundation trenches.(C.S.I. No 4.01) | 15 | Cum | |
| 15 | 15 | Concrete with 4cm gauge stone ballast , coarse sand (F.M. 1.5 to 2.0) and cement in proportion of 8:4:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.04a ) | 5 | CuM | |
| 16 | 16 | 1st Class brick ( class-150) work in 1:6 cement and coarse sand (F.M. 1.5.to 2.0 ). mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. (C.S.I. No.6.01) | 11 | Cum | |
| 17 | 17 | 1st class brick (class-150) work in 1:6 cement and coarse and (F.M. 1.8 to 2.5) super structure including necessary cutting and moulding of brick as requird & also including honey comb brick thickness of wall 230mm. (CSI 6.01+6.07+6.08) | 45 | Cum | |
| 18 | 18 | 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07) | 600 | Sqm | |
| 19 | 19 | Concrete with 4cm gauge stone ballast , coarse sand (F.M. 1.5 to 2.0) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.02) | 3 | CuM | |
| 20 | 20 | R.C.C. work with cement, approved coarse sand and 2 cm. (3/4\") gauge approved stone ballast in the proportion of 1:1.5:3 in the lintels of doors and windows excluding reinforcement and its bending but including its fixing and binding the same with 24 BWG, G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T&P etc. required for proper completion of the work. (Binding wire to be supplied by the contractor free of cost).(C.S.I. No. 5.23) | 0.5 | Cum. | |
| 21 | 21 | First class brick(class-150) work in 1:4 cement and coarse sand (F.M. 1.5 to 2.0) mortar in super structure in steps, parapet and facia including nacessary cutting moulding of bricks and including supply of all materials labour & T & P required for proper completion of the work including placing & fixing of reinforcement in position with 24 B.W.G. binding wire with centering shuttering complete but excluding cost of reinforcement and its bending which shall be measured separately. (CSI No. 6.17) | 1 | Cum. | |
| 22 | 22 | Providing and fixing white glazed China earthen ware water closet squatting \" Orisa type\" pan weaper size 580mmx140mm Hindustan Make or other equivalent approved make of Ist quality with 100mm dia. White glazed P or S trap fittings including cutting & making good the walls and floors wherever required with cement sand and grit mortar not less than 1:4 the seat and trap shall have to be fixed over minimum 3\" thick c.c. in proportion of 12:6:1 including cost of all materials, labour(C.S.I.No. 27.01+27.23) | 1 | Nos. | |
| 23 | 23 | Mild steel or iron work in heavy sizes such as trusses, built-up gates, door frames, record racks, roof work, gates etc. wrought to required form including drilling holes rivetting or welding where necessary and also fixing in proper position and alignment including supply of steel, nuts wastage etc. and their fixing as required for proper completion of the work (CSI No. 9.01) | 0.51 | MT | |
| 24 | 24 | TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) (CSI No. 9.03) | 0.4 | MT | |
| 25 | 25 | Providing and Fixing barbed iron wire fencing including stretching, fixing into the post including all labour, materials and T&P required for proper completion of work. the weight of hot dipped GI barbed wire having 12 SWG - 2 ply wires and 4 point ordinary barbs @ 150 mm (approx) C/C should be 100 gm per Meter. (CSI No. 9.07) | 125 | Rmt | |
| 26 | 26 | S/F 50x50mm, 8 gauge G.I. chain link fencing 1.8 M high including fixing to vertical posts, horizontal runners with 10mm dia. 40mm long bolts, nuts and washers complete with all material, labour and T&P etc. required for proper completion of work. Chain link of 8 gauge shall be galvanized by hot dipped method as per relevant IS Code. (Excluding cost of vertical posts and horizontal runners) (CSI No. 9.23) | 38 | Sqm | |
| 27 | 27 | P/F Concertina coil fencing with required dia. 600 mm upto 3 M height of wall between existing angle iron ‘Y’ shaped placed 2.4 M or 3.0 M apart and with 6 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary golts or G.I. barbed wire tied to angle iron all complete ( No. of rounds will be 7 to 8 in one Meter length) as per direction of Engineer I/C with reinforced barbed tape (R.B.T.)/ Spring core (2.5mm thick ) wire of high tensile strength of 165 kg/Sqmm with tape ( 0.52 mm thick ) of supreme make or equivalent and weight 43.478 gm/meter ( cost of MS angle, C.C. blocks shall be paid separately).(CSI No. 9.37) | 51 | Rmt | |
| 28 | 28 | Providing and fixing steel glazed window and ventilators of standard rolled Mann or Mahavir steel sections conforming to IS 7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion I.E. First part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included). (CSI No. 9.17) | 2 | SqM | |
| 29 | 29 | Earth filling under floors and in substation area including cost of earth. Earth to be obtained from outside the Corporation's area including its cartage and ramming, watering, dressing in 20 cm. thick layers and dressing of earth etc. complete including cost of earth with all lead and lift etc. complete.(C.S.I. No.4.10) | 60 | Cum. | |
| 30 | 30 | Local sand filling in plinth including supply of necessary quantity of local sand from outside the UPPCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work. (CSI No. 4.05) | 5 | CuM | |
| 31 | 31 | 2.5cm. thick DPC and of cement concrete consisting of 1 part cement 1.5 parts approved coarse sand, and 3 parts approved 12 mm. graded stone grit and also including liquid water proofing material as approved by the Engineer-Incharge in the proportions specified by the manufacturer. (CSI No. 7.02) | 45 | SqM | |
| 32 | 32 | Providing (12x15)mm section groove in plaster including all material, labour and T&P etc. required for proper completion of the work. (CSI No. 11.16) | 530 | Rmt | |
| 33 | 33 | Providing and laying floor with 20 mm. thick Kota stone over base cement mortar 1:4 mix and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete and including supply of all materials labour and T&P etc required for proper completion of the work. (CSI No. 12.17) | 50 | SqM | |
| 34 | 34 | Repair to plaster in 1:6 patches including removal of old plaster racking out joints to 1 cm.(3/8\") depth,watering the area and then replastering the same including supply of all materials, labour and T&P etc. required for proper completion of the work . (CSI No. 11.09+20.02) | 200 | Sqm | |
| 35 | 35 | Repair to 2.5 cm (1\") cement concrete floor in patches without base concrete & including supply of all materials.labour and T&P etc. required for proper completion of the work. (CSI No. 12.02+20.03) | 40 | Sqm | |
| 36 | 36 | Renewing panes of glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(a) glass of 4 mm thick. (CSI No. 20.04) 806b | 10 | SqM | |
| 37 | 37 | Providing and fixing 25mm depth glass strips of 3.15 mm thickness in joints of floor and skirting at the time of laying floors, flush with floor level including supply of all materials, labour and T&P etc. completion required for proper completion of the work. (CSI No. 12.13) | 40 | Rm | |
| 38 | 38 | Supply and replacing of L drops 16 mm dia x 300 long oxidized iron fittings including cost of nuts, bolts etc.complete.( CSI NO. 20.17a ) | 3 | No | |
| 39 | 39 | Supply and replacing of Tower bolts 10 mm dia x 250 mm longoxidized iron fittings including cost of nuts,bolts etc.complete. ( CSI NO. 20.17b ) | 3 | No | |
| 40 | 40 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material , labour and T&P etc for proper completion of work. (CSI No. 11.09) | 50 | Sqm | |
| 41 | 41 | S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of C.P. Teak wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials,labour and T&P etc. required for proper complete. (CSI No. 8.43) | 10 | Sqm | |
| 42 | 42 | Painting or varnishing on previously painted old wood or iron work including its sand papering,rubbing and cleaning as required including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.02+13.03) | 50 | Sqm. | |
| 43 | 43 | Supply and fixing of 32 mm thick single leaf flush door shutter (boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work. (CSI No. 8.57) | 5 | Sqm | |
| 44 | 44 | Supply and fixing of 110mm dia PVC pipe (4 Kg/Sq.cm) including supply of all labour & T&P's etc. complete. (C.S.I. No. 26.18) | 40 | Rm | |
| 45 | 45 | Wiring Point for light with 1.5sq mm FRLSH PVC insulated multisrand single core copper conductor cable in heavy gauge PVC casing caping on surface complete with 14 SWG copper earth contunuity wire,GP Box, modular type switch & ceiling rose/batten holder on 3mm thick phenolic laminated backlite sheet etc complete in all respects, as directed including matching colour wash P.S.I. NO. 121(C)-188(A)+187(A) | 8 | Each | |
| 46 | 46 | Wiring point for fan/fresh air fan same as above item P.S.I. No.123(C)-188(B)+187(A) | 3 | Each | |
| 47 | 47 | Wiring point for plug same as above item P.S.I. No.124(C)-188(C)+187(C) | 4 | Each | |
| 48 | 48 | S/F of CFL of 25 watt. NSI. | 5 | Each | |
| 49 | 49 | Supply and fixing of batten holder/angle holder complete (P.S.I. No. 405) | 5 | Each | |
| 50 | 50 | Supply and fixing of LED tube light batten fitting of approved make suitable for 1x22 watt LED tubelight on surface complete in all respect (P.S.I. No. 1413(A)-CAT-AA) | 6 | Each | |
| 51 | 51 | Supplying and fixing 32A-240V IC cutout of approved make (Crompton, Anchor or equivalent) on meter board or polished teak ply board complete in all respect (P.S.I. 1112) | 2 | Each | |
| 52 | 52 | S/F of power plug with 15 Amp./250 volt flush type switch and 5 pin 15 amp/250 volt flush type modular socket with 4mm copper conductor on concealed M.S. box with phenolic laminated bakelite sheet cover with supply of all material, labour T&P etc. required for proper completion of work.(1139A+211C) | 4 | Each | |
| 53 | 53 | S/wiring Sub main with 2 No. 4sq mm FRLSH PVC insulated 1100v grade single multistand single core copper conductor cable in 20mm dia heavy gauage PVC condut concealed with wall including one number 2.5 sqmm FR PVC insulated multistand copper cable as earth contuity wire drawn in conduit. (PSI 216 B) | 15 | R.M. | |
| 54 | 54 | Supply and fixing of factory wired integral LED flood light luminairies with die cast aluminium housing built with driver set suitable for 40 to 50 Watt . Conforming to IP 65 protection complete in all respect. PSI No 1451 CAT-AAA | 2 | Each | |
| 55 | 55 | S /F celling fan of 1200 mm sweep of USHA or any approved make with regulator etc. complete. (NSI ) | 3 | No | |
| 56 | 56 | Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20+13.21) | 400 | Sqm | |
| 57 | 57 | Finishing walll with water proof emulsion paint of ACE of Asian Paint or equivalent make including 3 coats of above and including one priming coat on already well preparied new wall surface to give an even shed including cost of all materials, labour and T & P etc. complete NSI | 300 | Sqm | |
| 58 | 58 | Providing and making tubewell with following works material :- | |||
| 59 | 58.01 | A- 110mm dia P.V.C. pipe heavy quality CSI. 19.08 | 40 | Rm | |
| 60 | 58.02 | B- 110mm dia P.V.C. Sloted pipe heavy quality CSI 19.10 | 20 | Rm | |
| 61 | 58.03 | C- 32mm dia G.I. Pipe b-class. CSI 26.01d | 35 | Rm | |
| 62 | 58.04 | Labour | |||
| 63 | 58.05 | Drilling bore from G.L. to 80.00 M B.G.L., work to be completed as per direction of Engineer I/C . (CSI No. 19.04G) | |||
| 64 | 58.06 | D-Drilling for 200 mm dia bore from G.L.M to80 B.G.L., work to be completed as per direction of Engineer I/C . CSI 19.04 (G) i | 60 | Rm | |
| 65 | 58.07 | E-Supply and fixing of PVC. bail plug of heavy quality including all labour material & T&P. (CSI No. 19.19a) | 1 | No | |
| 66 | 58.08 | F-Cleaning and dressing of site for tube well boring including cost of all labour, materials and T&P required for proper completion of work. (CSI No. 19.03) | 1 | Job | |
| 67 | 58.09 | G-Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. (CSI No. 19.33) | 35 | Rm | |
| 68 | 58.1 | H-Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completioon of work. (CSI No. 26.12) | 500 | Ltr. | |
| 69 | 58.11 | I-Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06a) | 1 | No | |
| 70 | 58.12 | J- Supply and Installation of 32 mm dia outlet size submersible pump set 1.00 H.P.78/30 operating head, single phase, KSB or other approved ISI marked, standard equivalent make complete with all material, labour, T&P. CSI 19.31a | 1 | Job | |
| 71 | 58.13 | K- S/F single phase control panel board for single phase submersible pump sets of 1.00HP KSB / BEST or other approved make containg rotary on/off switch for mains, the ammeter, volt meter & starter with selector etc. complete in all respect. CSI 19.30a | 1 | Job | |
| 72 | 58.14 | L- S/F of 1.5 sq. mm 3 core P.V.C. sheathed P.V.C. insulated water proof ISI marked, flat flexible copper cable of BEST or other equivalent make, for submersible pump sets, complete in all respect. CSI 19.32a | 30 | Rm | |
| 73 | 59 | Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06a) | 1 | No | |
| 74 | 60 | Providing and fixing 15 mm dia B-class Jindal, JTC, ISI marked G.I. pipes complete with with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. CSI 26.01a | 12 | RM | |
| 75 | 61 | As above item no. 60 but for 20 mm dia. CSI 26.01b | 5 | RM | |
| 76 | 62 | Supply and fixing brass bib cock/ stop cock of heavy quality 15 mm dia (400 gms) ISI mark including supply of all materials, labour, T&P etc complete. CSI 26.16a | 1 | No | |
| 77 | 63 | Supply and fixing C.P. brass bib cock/ stop cock of heavy quality (200gms) 15 mm dia ISI mark including supply of all materials, labour, T&P etc complete. CSI 26.16d | 2 | No | |
| 78 | 64 | Supply and fixing P.V.C. cistern Hindustan or equivalent make 10 litres. Capacity complte with all accessories (Low level) including all materials, labour and T&P etc complete. CSI 27.12 | 1 | No | |
| 79 | 65 | S/F 8mm thick white glazed Somany, Johnson etc 1st Quality tiles of size 300x300 mm in Flooring, laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials labour and Tools and Plants etc. required for proper completion of the work. CSI 12.11 | 3.68 | Sqm | |
| 80 | 66 | S/F 6 mm thick white glazed tiles of size 200x300 mm in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials labour and Tools and Plants etc. required for proper completion of the work. CSI 12.12 | 10 | Sqm | |
| 81 | 67 | Providing and fixing 550 mm x 400 mm. wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) with R.S. or C.I bracket painted white 15 mm dia C.P. brass pillar cock with C.P. metal handle (Weight not less than 400 gms).I.S.I. marked and 32 mm dia C.P. brass chain with rubber plug,32 mm dia C.P. brass waste standard pattern with check nut with 32 mm dia C.P. brass \"P\" or \"S\" trap and unions complete with P.V.C. connection 5\" size including supply of all materials, labour and T&P etc. required for proper completion of the work and including cutting and making good the walls and floor with cement, coarse sand and grit fittings used should of superior quality. CSI No. 27.08 | 1 | No | |
| 82 | 68 | Two coat with Acrylic emulsion paint of Berger/Asian/ICI OR equivalent paint (Paint and water in the ratio 1:1 by volume) over previousaly painted surface of cement concrete, cement plaster and bricks including supply of all materials, labour and T&P etc. required for proper completion of the work. (C.S.I.No.13.25+13.26) | 160 | Sqm. | |
| 83 | 69 | S/F high tensile steel colour coated anti rust, high temp resistant sheet with tensile strength 550 MPA hot dip metallic (zinc aluminium) alloy (Zn-55%) Al, (45%) coating 70GSM with total thickness not less than 0.45mm (TCT) durashine or equivalent make with necessary over lops including S/F Galvanized J/V hook with bolts, nuts, washer and bitumen washers etc. including cost of material, labour T&P etc and special fastners, nits & washers provided by the company etc, required for proper completion of work as per direction of E/I confirmining A.S. 1397:1993 NSI | 20 | Sqm. | |
| 84 | 70 | SPECIALTERMS & CONDITIONS :-\n | |||
| 85 | 70.01 | The work shall be started in immediately form the given date of start and to be completed on urgent basis. If any constractor pretend by linking the pending payment against other works bill and stop the work or slow the progress of work, Action shall be taken against as per agreement clause. | |||
| 86 | 70.02 | The Contractor who already executing some work in the department/division and stop the work/linger on the work without any reason. The performance shall be treated unsatisfactory, part-II of such type of contractor may not be opened. | |||
| 87 | 70.03 | Before execution of work, the contractor must cover the control panel on his own cost with the help of tirpal. | |||
| 88 | 70.04 | Due to rainy season, when work is not in progress the contractor must cover the roof on his own cost with help of plastic of required thickness. | |||
| 89 | 71 | TERMS & CONDITIONS :-\n | |||
| 90 | 71.01 | Firms are advised to visit the site of work and make themselves acquainted with site condition. No cliam what so ever shall be entertained after submission of the tender. | |||
| 91 | 71.02 | Cement shall be arranged by the contractor on his own cost, fresh cement conforming to relevant I.S. of brand such as J.K., Birla Uttam, A.C.C., Ambuja or equivalent of major plants shall be used in the work, Contractor shall make proper storage arrangement of cement at site of works to the satisfaction of E/I. Cement should always be stored in such a manned to be esily accessible of proper inspection and in a suitable weather tight building or storage shed to protect the cement from dampness. | |||
| 92 | 71.03 | During execution of work contractor may be asked to perform the quality test of material as and when required in an approved lab and its cost will be borne by the contractor | |||
| 93 | 71.04 | TOR stell shall be of Fe 415 grade and of approved make by E/I. | |||
| 94 | 71.05 | Quantities are approximate and vary up to any extent on either side as per requirement of site condition. | |||
| 95 | 71.06 | All above work shall be executed as per UPPWD /UPPCL specification or as per direction of E/I. | |||
| 96 | 71.07 | All electrification material /fittings and other materials of door/ windows including fittings etc shall be got approved from E/I before fixing the same at site of work. | |||
| 97 | 71.08 | ACE Acrylic distemper and paint etc shall be of ASIAN /BERGER/J&N brand of approved quality which shall be got approved before using in the work from the E/I. | |||
| 98 | 71.09 | Flush door and other aluminium fittings etc shall be got approved by E/I . Flush door shutter shall be 100% water proof of ISI marked. | |||
| 99 | 71.1 | If specifications for any item of work are not covered by any of the documents mentioned in the contract the same shall be decided and conveyed by the E/I to the contractor. | |||
| 100 | 71.11 | Old bricks , if any shall be recovered from dismantling of brick work in cement/ lime mortar as follows:-\n(a) 60% of the total quantity of dismantling brick work shall be treated as received and shall be reused @Rs.4200.00 per 1000 in relevant item of old B/W.\n(b) 25% of the total quantity of dismantled work shall be treated as brick bats and shall be recovered @Rs.850.00 per Cum at site and balance shall be treated as malba. | |||
| 101 | 71.12 | Old and dismantled door and windows if any shall be property of contractor which shall be recovered @Rs. 200.00 per Sqm from the contractor. | |||
| 102 | 71.13 | Old and unusable steel / scrap if any of RCC /RB work shall be [email protected] per kg from the contractor. | |||
| 103 | 71.14 | Kachchi shuttering in RCC work is strictly prohibited . If RCC is done with kachchi shuttering , 20% of rate of RCC shall be reduced without giving any notice to the contractor. | |||
| 104 | 71.15 | The work shall be carried out upto approximately 8m height for double storied building. | |||
| 105 | 71.16 | The rates are exclusive of GST which shall be paid extra as applicable. For reimbursement of GST contractor must be registerd with Sale tax Department. | |||
| 106 | 71.17 | Other terms and conditions are same as attached in enclosed tender document. |
AI Tender Summary
Tender Timeline
May 12, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJun 10, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 12, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender