11 Kv Interconnection Line Work For Providing 3 . 2 Km 11 Kv Interconnection Line From Deora ( Godan ) To Chandrol ( Tehdot ) On 140 Kg Pcc Pole For Godan Feeder At Bhander D/C Of Om Seondha Division
Tender Value
3.60 Lakhs
Estimated cost
Bid Submission
22 May 2020
0 days left
EMD
7205
Bank guarantee accepted
Document Fee
360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhander → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
11 Kv Interconnection Line Work For Providing 3 . 2 Km 11 Kv Interconnection Line From Deora ( Godan ) To Chandrol ( Tehdot ) On 140 Kg Pcc Pole For Godan Feeder At Bhander D/C Of Om Seondha Division
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-May-2020 | Corrigendum date | Date | 22-May-2020 |
BOQ
| Name of Work:- Work for installation of new 1500 KVAR at Pandokar Substation under Salone Dc,O&M DIv.Seondha | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Task Name:-11kv line on 140 kg Pcc pole\nMaterial Supplied by MPMKVVCL | 1 | ||
| 2 | 1.01 | 140 Kg.,8.0 Mtrs. long PCC pole | 212 | 38 | Number |
| 3 | 1.02 | G.I. WIRES 4.0 MM. (8 SWG)1 | 3 | 30.4 | Kilogram |
| 4 | 1.03 | 11 KV Polymer Pin Insulator | 4 | 114 | Number |
| 5 | 1.04 | AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) | 5 | 9.88 | Kilometer |
| 6 | 2 | Task Name:-11kv line on 140 kg Pcc pole\nMaterial Supplied by Contractor | 6 | ||
| 7 | 2.01 | STAY WIRE 7/3.15 MM.(7/10 SWG) | 7 | 66 | Kilogram |
| 8 | 2.02 | Clamp for 140 Kg PCC Pole MS Flat 50x6 mm1 | 8 | 8 | Set |
| 9 | 2.03 | Stay Insulators 90X65mm | 9 | 12 | Number |
| 10 | 2.04 | Back filling of poles with boulders.1 | 10 | 38 | Number |
| 11 | 2.05 | Stone Block/Pre cast block for base pedding(450X450X75MM) | 11 | 38 | Number |
| 12 | 2.06 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay | 12 | 2.4 | Cmt |
| 13 | 2.07 | Red oxide paint | 13 | 1.5 | Litre |
| 14 | 2.08 | Aluminium paint | 14 | 1.5 | Litre |
| 15 | 2.09 | Anti climbing devices | 15 | 38 | Number |
| 16 | 2.1 | 11 KV V cross arm 65X65X6 mm. angle type | 16 | 38 | Number |
| 17 | 2.11 | Danger Boards Enamelled 11 KV | 17 | 38 | Number |
| 18 | 2.12 | Aluminium binding wire and tape | 18 | 2.5 | Kilogram |
| 19 | 2.13 | M.S.Nuts and Bolts | 19 | 57 | Kilogram |
| 20 | 2.14 | Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm | 20 | 76 | Number |
| 21 | 2.15 | 11 KV Top clamp 65X65X6 mm. angle type | 21 | 38 | Number |
| 22 | 2.16 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire | 22 | 38 | Number |
| 23 | 2.17 | Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor | 23 | 9 | Number |
| 24 | 2.18 | Stay set complete without Stay wire 16 mm. (Painted) | 24 | 12 | Number |
| 25 | 3 | Task Name:-11kv DP structrue on 140 kg pcc pole\nMaterial Supplied by MPMKVVCL | 25 | ||
| 26 | 3.01 | 140 Kg.,8.0 Mtrs. long PCC pole | 26 | 6 | Number |
| 27 | 3.02 | 11 KV Composite Polymer Disc Insulators | 27 | 18 | Number |
| 28 | 3.03 | 11 KV Strain hardware (T&C type) fittings | 28 | 18 | Number |
| 29 | 3.04 | 11 KV Polymer Pin Insulator | 29 | 6 | Number |
| 30 | 4 | Task Name:-11kv DP structrue on 140 kg pcc pole\nMaterial Supplied by Contractor | 30 | ||
| 31 | 4.01 | STAY WIRE 7/3.15 MM.(7/10 SWG) | 31 | 99 | Kilogram |
| 32 | 4.02 | Clamp for 140 Kg PCC Pole MS Flat 50x6 mm1 | 32 | 18 | Set |
| 33 | 4.03 | Stay Insulators 90X65mm | 33 | 18 | Number |
| 34 | 4.04 | Stone Block/Pre cast block for base pedding(450X450X75MM) | 34 | 6 | Number |
| 35 | 4.05 | Concreting of PCC poles @ 0.45 cmt. (Cubic Metric Ton) per pole | 35 | 2.7 | Cmt |
| 36 | 4.06 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay | 36 | 3.6 | Cmt |
| 37 | 4.07 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire | 37 | 6 | Number |
| 38 | 4.08 | Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole | 38 | 4.8 | Kilogram |
| 39 | 4.09 | Red oxide paint | 39 | 1.5 | Litre |
| 40 | 4.1 | Aluminium paint | 40 | 1.5 | Litre |
| 41 | 4.11 | D.C. Cross-arms 8' Channel (100x50x6mm) | 41 | 3 | Set |
| 42 | 4.12 | Anti climbing devices | 42 | 6 | Number |
| 43 | 4.13 | Danger Boards Enamelled 11 KV | 43 | 3 | Number |
| 44 | 4.14 | M.S.Nuts and Bolts | 44 | 18 | Kilogram |
| 45 | 4.15 | Bracing/Support angle of 65x65x6 mm for 8' (2.4 mtr ) centre DP | 45 | 3 | Set |
| 46 | 4.16 | Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm | 46 | 12 | Number |
| 47 | 4.17 | Stay set complete without Stay wire 16 mm. (Painted) | 47 | 18 | Number |
| 48 | 5 | Task Name:-tapping DP\nMaterial Supplied by MPMKVVCL | 48 | ||
| 49 | 5.01 | 140 Kg.,8.0 Mtrs. long PCC pole | 49 | 1 | Number |
| 50 | 5.02 | 11 KV Composite Polymer Disc Insulators | 50 | 3 | Number |
| 51 | 5.03 | 11 KV Strain hardware (T&C type) fittings | 51 | 3 | Number |
| 52 | 5.04 | 11 KV Polymer Pin Insulator | 52 | 2 | Number |
| 53 | 6 | Task Name:-tapping DP\nMaterial Supplied by Contractor | 53 | ||
| 54 | 6.01 | STAY WIRE 7/3.15 MM.(7/10 SWG) | 54 | 11 | Kilogram |
| 55 | 6.02 | Clamp for 140 Kg PCC Pole MS Flat 50x6 mm1 | 55 | 2 | Set |
| 56 | 6.03 | Stay Insulators 90X65mm | 56 | 2 | Number |
| 57 | 6.04 | Stone Block/Pre cast block for base pedding(450X450X75MM) | 57 | 1 | Number |
| 58 | 6.05 | Concreting of PCC poles @ 0.45 cmt. (Cubic Metric Ton) per pole | 58 | 0.3 | Cmt |
| 59 | 6.06 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay | 59 | 0.4 | Cmt |
| 60 | 6.07 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire | 60 | 1 | Number |
| 61 | 6.08 | Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole | 61 | 0.8 | Kilogram |
| 62 | 6.09 | Red oxide paint | 62 | 0.6 | Litre |
| 63 | 6.1 | Aluminium paint | 63 | 0.6 | Litre |
| 64 | 6.11 | Anti climbing devices | 64 | 2 | Number |
| 65 | 6.12 | D.C. Cross-arms 8' Channel (100x50x6mm) | 65 | 1 | Set |
| 66 | 6.13 | Danger Boards Enamelled 11 KV | 66 | 1 | Number |
| 67 | 6.14 | M.S.Nuts and Bolts | 67 | 6 | Kilogram |
| 68 | 6.15 | Bracing/Support angle of 65x65x6 mm for 8' (2.4 mtr ) centre DP | 68 | 1 | Set |
| 69 | 6.16 | Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm | 69 | 4 | Number |
| 70 | 6.17 | Stay set complete without Stay wire 16 mm. (Painted) | 70 | 2 | Number |
| 71 | 7 | Labour Charge | 71 | 1 | Amt. |
| 72 | 8 | Transportation charges | 72 | 1 | Amt. |
| 73 | 9 | GST | 73 | 1 | Amt. |
AI Tender Summary
Tender Timeline
May 18, 2020
11:30 IST
Tender Published
Tender notice published.
Completed
May 22, 2020
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 22, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 23, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender