Military Engineer Services-MES has published Resurfacing Of Bituminous Hard Standing In Front Of 120 Men Barrack And Special Repair To Pathways And Hardstanding At Lailapur And Vairengte Under Ge Silchar. Submission Date for this Tender is 10-06-2020. Road Work Tenders in VAIRENGTE, LAILAPUR Mizoram. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 23-May-2020 | BOQ REVISED | BOQ | 03-06-2020 |
2 | 03-Jun-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-06-2020 |
RESURFACING OF BITUMINOUS HARD STANDING IN FRONT OF 120 MEN BARRACK AND SPECIAL REPAIR TO PATHWAYS AND HARDSTANDING AT LAILAPUR AND VAIRENGTE UNDER GE SILCHAR | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and depth not exceeding 50 mm and removing materials from site or staking for reuse at site not exceeding 50 metres complete all as specified and directed. | 20 | 10 Sqm | |
2 | 2 | Material and labour for premix bituminous macadam of course aggregate 50 to 20 mm mixed with 4% binder (using paving bitumen VG-30) laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less), rolled with 8 to 12 tonne power roller complete all as specified and directed.\nNote:- Binder content, paving bitumen any penetration shall be @ 4% by weight of total mix. All materials are prepared by hot mix plant. | 13.5 | Cum | |
3 | 3 | All as per item No. 2 above but except coarse aggregate.\nNote :- Serviceable coarse aggregate obtained from item No. 1 shall be reused. | 0.15 | Cum | |
4 | 4 | Material and labour for repair to pot holes depth not exceeding 30 mm and area not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads path etc cutting around edges to at least 25 mm in depth, making good by applying tack coat with paving bitumen grade VG-10 at 5 Kg per 10 Sqm, putting in premixed as specified for thin bituminous carpet (2 cm thick with 0.27 cum of stone chipping mixed with 14.60 Kg per 10 sqm of binder paving grade VG-30 bitumen) well rammed and premixed sand seal coat, applying evenly binder using paving bitumen grade VG-30 @ 6.8 kg per 10 sqm blinding with sand @ 0.06 Cum per 10 sqm and rolled to a uniforms smooth surface with power roller 8 to 12 tonne complete all as specified. \n | 1 | 10 Sqm | |
5 | 5 | Material and labour for Preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with paving bitumen grade VG-10 at 10 kg per 10 sqm complete all as specified. | 20 | 10 Sqm | |
6 | 6 | Material and labour for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with paving bitumen grade VG-10 at 5 kg per 10 sqm complete all as specified. | 173 | 10 Sqm | |
7 | 7 | Material and labour for 30mm consolidated thickness bituminous premixed carpet with 0.405 Cum of stone chippings mixed with 21.90 kg of binder using paving bitumen grade VG-30, rolled with power roller 8 to 12 tonne and compacted to required camber and gradient and premixed sand seal coat, applying evenly binder using paving bitumen grade VG-30 @ 6.8 kg per 10 sqm blinding with sand @ 0.06 Cum per 10 sqm and rolled to a uniforms smooth surface with power roller 8 to 12 tonne complete all as specified. | 193 | 10 Sqm | |
8 | 8 | Material and labour for painting lines, dashes, arrows, letters etc. on roads pavements and the like exceeding 10 cm wide with road marking paint, white or golden yellow colour after preparation of surfaces complete all as specified. \nMake: Nerolac/ Asian/ Berger /Shalimars/ Dulux \n | 22 | Sqm | |
9 | 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed. | 380 | Sqm | |
10 | 10 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed. | 15.28 | Cum | |
11 | 11 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as directed. | 0.8 | Cum | |
12 | 12 | Demolition of of brick work/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concret articles all as directed. | 3.38 | Cum | |
13 | 13 | Taking down cement plaster on brick or stone wall, concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc. all as directed. | 10 | Sqm | |
14 | 14 | Material and labour for plain cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified. | 0.4 | Cum | |
15 | 15 | Material and labour for plain cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified. | 1 | Cum | |
16 | 16 | Material and labour brick work with sub class ‘B’ brick straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified. | 0.5 | Sqm | |
17 | 17 | Material and labour for Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified. | 25 | Sqm | |
18 | 18 | Material and labour for 40mm thick PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in flooring, finished the surfaces even and fair complete all as specified. | 380 | Sqm | |
19 | 19 | Material and labour for 15mm thick screed bed or bedding layers of cement mortar 1:6 for laying floor finishes all as specified. | 380 | Sqm | |
20 | 20 | Material and labour for reflective type rubber moulded chequered cement concrete tiles 300x300x25mm size, set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified.\nMake:- Conforming to IS (Factory made) | 380 | Sqm | |
21 | 21 | Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete and finished the surface fair and even cement all as specified. | 35 | Sqm | |
22 | 22 | Material and labour for providing PCC 1:3:6, type C1 using 20 mm graded crushed stone aggregate as in surface channels and drain all as specified. | 0.8 | Cum | |
23 | 23 | Material and labour for finishing cement concrete/newly plastered surface even and smooth using extra cement all as specified. | 22 | Sqm | |
24 | 24 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, mitred/stopped ends etc. complete all as specified. | 20 | Rm | |
25 | 25 | Material and labour for applying two coats of colour wash over one coat of white wash on newly plastered wall surface including preparation complete all as specified. | 13 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail