| 1 | 1 | BUS TERMINAL | BI01010001010000000000000515BI0100001113 | | |
|---|
| 2 | 1.01 | od211828/2019_2020 : Engaging Man coolies | BI01010001010000000000000515BI0100001114 | 13 | each |
|---|
| 3 | 1.02 | 14.78 : Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging)including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. Thecleaning shall consist following operations:-(i)Tank shall be emptied of water by pumping & bottom shall be cleaned of slit andother deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc.and pressure washed with water.(iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall beremoval from the surface.(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction ofEngineer-in-Charge. | BI01010001010000000000000515BI0100001115 | 81.6 | sqm |
|---|
| 4 | 1.03 | 14.72X : Scaffolding | BI01010001010000000000000515BI0100001116 | 6 | each |
|---|
| 5 | 1.04 | 13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | BI01010001010000000000000515BI0100001117 | 2700.17 | sqm |
|---|
| 6 | 1.05 | 14.66.2 : Finish walls with Acryllic Smooth exterior paint of required shade:Old work (One or more coat applied @ 0.90 ltr/10 sqm) | BI01010001010000000000000515BI0100001118 | 299.471 | sqm |
|---|
| 7 | 1.06 | 14.72 : Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done . | BI01010001010000000000000515BI0100001119 | 504 | sqm |
|---|
| 8 | 1.07 | 14.76 : Cleaning and desilting of gully trap chamber, including removal of rubbish mixed withearth etc. and disposal of same, all as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001120 | 6 | no |
|---|
| 9 | 1.08 | 14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001121 | 565.61 | sqm |
|---|
| 10 | 1.09 | 14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | BI01010001010000000000000515BI0100001122 | 267.604 | sqm |
|---|
| 11 | 1.1 | 14.54.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work | BI01010001010000000000000515BI0100001123 | 284.64 | sqm |
|---|
| 12 | 1.11 | od224837/2019_2020 : cleaning of septic tank and soak pit and disposing it to Bramapuram including all cost of conveyance etc complete as per directions of Engineer- in - Charge. | BI01010001010000000000000515BI0100001124 | 3 | each |
|---|
| 13 | 1.12 | 10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001125 | 628.856 | kg |
|---|
| 14 | 1.13 | od225604/2019_2020 : Cleaning of truss roof at all heights with brushes, water , cleaner etc removal of silt , rubbish from top and cleaning with , disposing malba etc complete as per the direction of Engineer- in- Charge. | BI01010001010000000000000515BI0100001126 | 2700.17 | per sqm |
|---|
| 15 | 1.14 | 15.18 : Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | BI01010001010000000000000515BI0100001127 | 125.889 | kg |
|---|
| 16 | 1.15 | 15.28.1 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet | BI01010001010000000000000515BI0100001128 | 19.25 | sqm |
|---|
| 17 | 1.16 | 14.77 : Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operatedhigh pressure suction cum jetting sewer cleaning machine fitted with pump having4000 litres suction capacity and 6000 litres water jetting tank capacity including skilledoperator, supervising engineer etc. for cleaning and partial desilting of manholes anddechocking of sewer lines. Dechocking and flushing of sewer line from one manholeto another by high pressure jetting system of 2200 PSI for sewer line from 150mm diaupto 300mm dia for all depth. | BI01010001010000000000000515BI0100001129 | 60 | metre |
|---|
| 18 | 1.17 | 12.4.2 : Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | BI01010001010000000000000515BI0100001130 | 25 | metre |
|---|
| 19 | 1.18 | 15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001131 | 1.549 | cum |
|---|
| 20 | 1.19 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001132 | 0.081 | cum |
|---|
| 21 | 1.2 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | BI01010001010000000000000515BI0100001133 | 26.801 | sqm |
|---|
| 22 | 1.21 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001134 | 6.48 | kilogram |
|---|
| 23 | 1.22 | 10.6.3 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover | BI01010001010000000000000515BI0100001135 | 5.04 | sqm |
|---|
| 24 | 1.23 | 50.4.1.1 : Providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc. | BI01010001010000000000000515BI0100001136 | 12.276 | cum |
|---|
| 25 | 1.24 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001137 | 7 | cum |
|---|
| 26 | 1.25 | 51.2.3 : Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade | BI01010001010000000000000515BI0100001138 | 96 | cum |
|---|
| 27 | 1.26 | 14.5.1 : Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm | BI01010001010000000000000515BI0100001139 | 7.561 | sqm |
|---|
| 28 | 1.27 | 16.47.2 : Painting runway/ taxi track /apron making with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-Charge, i/c cleaning the surface of all dirt, scales, oil grease and other foreign material etc. and lining out complete.Old work (One or more coats) | BI01010001010000000000000515BI0100001140 | 765 | sqm |
|---|
| 29 | 1.28 | 16.59.1 : Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm\nthick aluminium sheet, face to be fully covered with high intensity encapsulated\ntype heat activated retro reflective sheeting conforming to type - IV of ASTM-D\n4956-01 in blue and silver white or other colour combination including subject\nmatter, message (bi-lingual), symbols and borders etc. as per IRC: 67- 2001, pasted\non substrate by an adhesive backing which shall be activated by applying heat\nand pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with\nsuitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S.\nangle iron of size 25x25x3 mm along with theft resistant measures, mounted and\nfixed with 2 Nos M.S. angles of size 35x35x5 mm to a vertical post made up to M.S.\nTee section ISMT 50x50x6 mm welded with base plate of size 100x100x 5 mm at the\nbottom end and including making holes in pipes, angles flats, providing & fixing\nM.S. message plate of required size, steel work to be painted with two or more\ncoats of synthetic enamel paint of required shade and of approved brand &\nmanufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee\nsupport to be painted in black and white colours). Backside of aluminium sheet to\nbe painted with two or more coats of epoxy paint over and including appropriate\npriming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-Charge.Mandatory / Regulatory sign boards of 900 mm diametre with support length of 3750 mm | BI01010001010000000000000515BI0100001141 | 4 | each |
|---|
| 30 | 1.29 | 16.59.2 : Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm\nthick aluminium sheet, face to be fully covered with high intensity encapsulated\ntype heat activated retro reflective sheeting conforming to type - IV of ASTM-D\n4956-01 in blue and silver white or other colour combination including subject\nmatter, message (bi-lingual), symbols and borders etc. as per IRC: 67- 2001, pasted\non substrate by an adhesive backing which shall be activated by applying heat\nand pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with\nsuitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S.\nangle iron of size 25x25x3 mm along with theft resistant measures, mounted and\nfixed with 2 Nos M.S. angles of size 35x35x5 mm to a vertical post made up to M.S.\nTee section ISMT 50x50x6 mm welded with base plate of size 100x100x 5 mm at the\nbottom end and including making holes in pipes, angles flats, providing & fixing\nM.S. message plate of required size, steel work to be painted with two or more\ncoats of synthetic enamel paint of required shade and of approved brand &\nmanufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee\nsupport to be painted in black and white colours). Backside of aluminium sheet to\nbe painted with two or more coats of epoxy paint over and including appropriate\npriming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-Charge.Cautionary / warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm | BI01010001010000000000000515BI0100001142 | 2 | each |
|---|
| 31 | 1.3 | 16.70.1 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I. wire of dia 4 mm | BI01010001010000000000000515BI0100001143 | 234 | sqm |
|---|
| 32 | 1.31 | 50.2.33.5 : Cutting branches of trees overhanging above any structures of girth between 40cm to 60cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete. | BI01010001010000000000000515BI0100001144 | 8 | each |
|---|
| 33 | 1.32 | 2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared | BI01010001010000000000000515BI0100001145 | 3600 | sqm |
|---|
| 34 | 1.33 | 2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | BI01010001010000000000000515BI0100001146 | 2000 | sqm |
|---|
| 35 | 1.34 | 12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001147 | 43.175 | sqm |
|---|
| 36 | 1.35 | 50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001148 | 51.3 | cum |
|---|
| 37 | 1.36 | 8.6 : Mirror polishing on marble work/ granite work/stone work where ever required to give high gloss finish complete. | BI01010001010000000000000515BI0100001149 | 603 | sqm |
|---|
| 38 | 1.37 | 8.12 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | BI01010001010000000000000515BI0100001150 | 30 | sqm |
|---|
| 39 | 1.38 | od8473/2020_2021 : Cleaning of terrace/loft water storage tank (inside surface area) upto 8000 litre capacity<br>at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank<br>and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm<br>per litre capacity of tank including marking the date of cleaning on the side of tank body<br>with the help of stencil and paint and disposing of malba all complete as per direction<br>of Engineer-in-Charge. (The old date already written on tank should be removed with<br>paint remover or black paint and if date is not written with the stencil or old date is not<br>removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings<br>or ball cock is damaged that is to be repaired by contractor at his own cost and nothing<br>extra will be paid on this account) | BI01010001010000000000000515BI0100001151 | 195380 | Litre |
|---|
| 40 | 1.39 | od8474/2020_2021 : Engaging fitter | BI01010001010000000000000515BI0100001152 | 3 | each |
|---|
| 41 | 1.4 | 16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge) | BI01010001010000000000000515BI0100001153 | 5 | cum |
|---|
| 42 | 1.41 | 30.2.57.1 : Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100) | BI01010001010000000000000515BI0100001154 | 10 | no |
|---|
| 43 | 1.42 | od8501/2020_2021 : Supply and planting shot shrubs and trees including all cost of conveyance etc complete | BI01010001010000000000000515BI0100001155 | 10 | each |
|---|
| 44 | 1.43 | 11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001156 | 12.564 | sqm |
|---|
| 45 | 1.44 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001157 | 6.48 | sqm |
|---|
| 46 | 1.45 | 17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001158 | 1 | each |
|---|
| 47 | 1.46 | 17.4.1 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern | BI01010001010000000000000515BI0100001159 | 7 | each |
|---|
| 48 | 1.47 | 17.71 : Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms | BI01010001010000000000000515BI0100001160 | 4 | each |
|---|
| 49 | 1.48 | od11528/2020_2021 : Providing and fixing damaged partition work using 7.5 mm thick PVC plain panel board of approved quality in aluminium frame or truss work by removing the old one and replacing it with new one and necessary screws etc complete | BI01010001010000000000000515BI0100001161 | 43.2 | sqm |
|---|
| 50 | 1.49 | 50.18.9.18.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall | BI01010001010000000000000515BI0100001162 | 10 | metre |
|---|
| 51 | 1.5 | 50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 | BI01010001010000000000000515BI0100001163 | 10 | metre |
|---|
| 52 | 1.51 | od11530/2020_2021 : supplying and fixing rubber bush in front of bus terminal by removing the damaged rubber bush , including all fittings, cost of conveyance etc complete as per directions of Engineer-in charge | BI01010001010000000000000515BI0100001164 | 20 | metre |
|---|
| 53 | 1.52 | od11534/2020_2021 : supply and fixing informatory name board in each bay including all cost of lettering, conveyance etc complete | BI01010001010000000000000515BI0100001165 | 13 | each |
|---|
