Construction Of Health Sub Centre Building With Delivery Room At Gadiara ( Khera ) In Tehsil Palampur Distt . Kangra ( H . P ) C/O Building Portion ( Ground Floor ) Including Ws And Si , Septic Tank Etc .
Tender Value
9.55 Lakhs
Estimated cost
Bid Submission
22 May 2020
0 days left
EMD
19200
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhawarna → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Health Sub Centre Building With Delivery Room At Gadiara ( Khera ) In Tehsil Palampur Distt . Kangra ( H . P ) C/O Building Portion ( Ground Floor ) Including Ws And Si , Septic Tank Etc .
BOQ
| Name of Work:- Construction of Health Sub Centre building with delivery room at Gadiara (Khera) in Tehsil Palampur Distt. Kangra (H.P)Sub Work : - C/o Building portion (Ground floor) including WS & SI, septic tank etc. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, de-watering and/or removal of slush and incidentals, lift upto any heights, stacking the excavated soil not more than 3 mtrs (Three meters) clear from the edge of excavation and then retuning the stacked soil in15cm (Fifteen centimeter)layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-In charge, within all leads, lifts of materials and other incidentals. | 75.34 | Cubic metres | |
| 2 | 2 | Excavation in drains and channels etc; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturator soil including chiseling or any other mixed variety of soil, lift upto any heights and depth , stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- In-charge, within all leads, lifts of materials and other incidentals as per HPPWD specification 1990 Vol-I. | 10.8 | Cubic metre | |
| 3 | 3 | Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete within all leads, lifts of materials and other incidentals. | 3.98 | Cubic metres | |
| 4 | 4 | Providing form work with steel plates 3.15mm. (Three decimal fifteen milimetre) thick welded with angle iron frame 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre ).,so as to give a fair finish including centering shuttering, strutting and propping etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling up to all heights and removal of the same for in-situ reinforced concrete and plain concrete work in foundation, footings, bases of columns etc and mass concrete including carriage of materials within all leads and lifts and other incidentals as per HPPWD specification 1990 Vol-I. | 16.64 | Square metre. | |
| 5 | 5 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, within all leads, lifts of materials and other incidentals. | 4.06 | Square metres | |
| 6 | 6 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters)thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular, polygonal in plan, including carriage of materials within all leads and lifts and other incidentals as per HPPWD specification 1990 Vol-I. | 43.36 | Square metre | |
| 7 | 7 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters)thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams hunching, cantilevers bressumers and lintels upto all depths within all leads, lifts of materials and other incidentals. | 56.79 | Square metres | |
| 8 | 8 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters)thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etc; within all leads, lifts of materials and other incidentals. | 60.95 | Square metres | |
| 9 | 9 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in edge of slab and breaks in floors and walls under any thickness within all leads, lifts of materials and other incidentals. | 93.41 | Running meters | |
| 10 | 10 | Providing and laying cement concrete nominal mix 1:6:12(One cement: Six sand: Twelve graded broken/crushed stone aggregate 40mm (forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth, within all leads, lifts of materials and other incidentals. | 5.09 | Cubic metres | |
| 11 | 11 | Providing and laying cement concrete nominal mix 1:4:8(One cement Four sand :Eight graded cursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth, within all leads, lifts of materials and other incidentals. | 4.13 | Cubic metres | |
| 12 | 12 | Providing and laying mechanically mixed and vibrated cement concrete of grade M-20 design mix with minimum cement contents 330 kg (Three hundred thirty Kilogrammes) per cubic metres 20mm nominal size to give and even smooth surface curing complete excluding cost of form work and reinforcement for reinforced concrete in foundation footings bases of columns and the like and mass concrete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rates including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. | 5.44 | Cubic metres | |
| 13 | 13 | Providing and laying cement concrete of grade M-20 design mix to obtain the minimum crushing strength of 20 KN/mm² with maximum cement contents of 310 kg (Three hundred ten Kilogrammes) per cubic metres mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Column, pillers and struts above plinth level to floor level. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 3.2 | Cubic metres | |
| 14 | 14 | Providing and laying cement concrete of grade M-20 design mix to obtain the minimum crushing strength of 20 KN/mm² with maximum cement contents of 310 kg (Three hundred ten Kilogrammes) per cubic metres mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilever upto floor all level. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 14.06 | Cubic metres | |
| 15 | 15 | Providing and laying cement concrete of grade M-20 design mix to obtain the minimum crushing strength of 20 KN/mm² with maximum cement contents of 310 kg (Three hundred ten Kilogrammes) per cubic metres mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases excluding landing but including preparing of top surfaces and finishing of nosing upto all floor level. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 1.18 | Cubic metres | |
| 16 | 16 | Providing and laying cement concrete of grade M-20 design mix to obtain the minimum crushing strength of 20 KN/mm² ( Twenty newton per milimetre square) with minimum cement contents of 310 kg (Three hundred ten Kilogrammes) per cubic metres mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Chhajjas not less than 10cm thickness, including finishing the exposed surface with cement mortar 1:3 (1 Cement: 3 Sand) to give smooth and even surfaces centring/form work but including the cost of reinforcement concrete work above linth level to floor to level. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 0.49 | Cubic metres | |
| 17 | 17 | Providing and laying cement concrete 1:2:4 (One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size, mechanically mixed and vibrated including curing complete excluding the cost of form work in foundation and plinth. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 0.22 | Cubic metres | |
| 18 | 18 | Providing Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wires completed and other incidentals due for its completion for all floors, within all leads and lifts of materials and other incidentals. | 3055.04 | Kilograms | |
| 19 | 19 | Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement: six sand : Twelve graded stone agg.) 20 mm (Twenty milimetre nominal size ) at plinth level in cement mortar 1:6 (one cement :six sand ) including carriage of materials with in all leads and lifts and other incidentals | 6.78 | Cubic metres. | |
| 20 | 20 | Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (One Cement is to Six Sand). The rate is inclusive for carriage of materials within all leads, lifts and other incidentals | 6.69 | Cubic metres | |
| 21 | 21 | Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth in foundation and plinth including raking out joints in cement mortar 1:5 (One Cement is to Five Sand). The rate is inclusive for carriage of materials within all leads, lifts and other incidentals | 12.38 | Cubic metres | |
| 22 | 22 | Providing and laying damp proof course 38 mm (Thirty eight milimetere) thick with cement concrete 1:2:4 (one cement : two sand: four graded crushed stone aggregate 12.5 mm (Twelve decimal five milimetere) nominal size mechanically mixed and curing complete including carriage of materials within all leads, lifts, and other incidentals as per HPPWD specification 1990 Vol-I. | 8.42 | Square metre. | |
| 23 | 23 | Applying a coat of Hot bitumen(Mexphalt 80/100 (Eighty oblique hundred) or equivalent) using 1.70 kg/P.sqm.(one point seven zero kilogram ) Per Squaremetere) on damp proof courses after cleaning the surface with a piece of cloth lightly soaked in kerosene oil including carriage of materials within all leads, lifts, and other incidentals as per HPPWD specification 1990 Vol-I. | 8.42 | Square metre. | |
| 24 | 24 | Precast concrete hydraulically compressed block masonry in walls 20cm (Twenty centimeters) thick hollow blocks of with cement concrete blocks of size 40cm x 19cm x 20cm. (Forty centimetre into nineteen centimetre into twenty centimetre) including quoins blocks, jambs block closer etcetera in cement concrete 1:3:6 (One cement isto Three Sand isto Six graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) in super-structure above plinth level to all floor level with cement mortar 1:6 (One Cement isto Six Sand) and curing complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 11.58 | Cubic metres | |
| 25 | 25 | Precast concrete hydraulically compressed block masonry in walls 10cm (Ten centimeters) thick hollow blocks Masonry including quoins blocks, jambs block closer etcetera in cement concrete 1:3:6 (One cement isto Three Sand isto Six graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) in super-structure above plinth level to all floor level with cement mortar 1:6 (One Cement isto Six Sand) and curing complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 52.34 | Square metre. | |
| 26 | 26 | Stone filling tightly dry hand packed under flooring including all leads,lifts of materials and other incidentals | 6.04 | Cubic metres | |
| 27 | 27 | Stone filling/brick bats aggregate in soak pit Including carriage of materials within all leads, lifts and other incidentals. | 10.18 | Cubic metres | |
| 28 | 28 | Providing and fixing flush door shutters interior grade phenol bonded (Alpro or equivalent) ISI marked No.IS 22902/Factory made paneled door ISI marked No.IS-1003 construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and faco venco on both faces of shutters (40mm (Forty milimetre) thick including black enameled) M.S. butt hinges, including carriage of materials within all leads, lifts and other incidentals. | 12.91 | Square metres | |
| 29 | 29 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85-G with a wire of dia 0.56(Zero decimal Fifty six milimetres) for doors and windows and clerestory windows including bright finished black enameled iron hinges with necessary screws 40mm (Forty milimetres) 2nd class deodar wood, within all leads and lifts and other incidentals. | 4.29 | Square metres | |
| 30 | 30 | Providing and fixing cup board 19mm (Nineteen milimetre) thick water proof termite resistant commercial board including shelves and shutters, back side of the cup board/cabinet shall be finished with 8mm (eight milimetre) thick ply. All cut portion of the shutters and shelves from all side shall be finished with 6mm (Six milimetre) thick hard wood edging including nickel plated bright finished piano hinges, including carriage of materials within all leads, lifts and other incidentals. | 7.53 | Square metres | |
| 31 | 31 | Providing and fixing 19mm (Nineteen milimetre) thick water proof commercial board in shelves/ box for cup board butt joints and fixing with nails and screws etc. complete as per architect drawing. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals as per the direction of Engineer-in-Charge. | 23.72 | Square metre | |
| 32 | 32 | Providing and fixing 6mm (Six milimetre) thick ply wood linning with butt jointing and nails (Frame work and cover fillets to be measured and paid for separately). The rate is inclusive for carriage of materials within all leads, lifts and other incidentals as per the direction of Engineer-in-Charge. | 7.53 | Square metre | |
| 33 | 33 | providing and fixing Ist class deodar wood12mm(Twelve milimetere) thick and 100mm (Hundred milimetere)wide pelmet with 25mm(Twenty five milimetere) diametere wooden curtain rod and brackets including fixing witgh 25x3mm(Twenty five into three milimetere) M.S flat 10cm. Long and plugs etc. complete including carriage of materials within all leads, lifts and other incidentals. | 12.83 | Running metres | |
| 34 | 34 | Providing and fixing M.S. plain grills of required pattern in steel frames of windows etc. with M.S. round headed bolts and nuts or by screws including carriage of materials within all leads and lifts of materials and other incidentals as per the direction of Engineer-in-Charge. | 399.8 | Kilo gramme | |
| 35 | 35 | Providing and fixing 250X16mm (Two hundred fifty by Sixteen milimetre) size aluminium sliding door bolt anodized transparent or dyed to required colour and shade with screws and nuts etc. complete including carriage of materials within all leads and lifts of materials and other incidentals . | 7 | Numbers. | |
| 36 | 36 | Providing and fixing aluminium Tower bolt ( barrel type) anodized transparant or dyed to required shade and colour with necessary screws etc. complete including carriage of materials within all leads, lifts, and other incidentals. | |||
| 37 | 36.1 | i) 150x10mm (One hundred fifty into ten milimetre)size \n\n | 18 | Numbers. | |
| 38 | 36.2 | ii) 100x10mm (One hundred into ten milimetre)size \n\n | 16 | Numbers | |
| 39 | 37 | Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc completed including carriage of materials within all leads, lifts, and other incidentals. | |||
| 40 | 37.1 | (a) 125 mm (One hundred twenty five milimetre) | 22 | Numbers. | |
| 41 | 37.2 | b) 100mm ( Hundred milimetre) | 14 | Numbers. | |
| 42 | 38 | Providing and fixing 150mm (One hundred fifty milimetre) M.S. single acting spring hinges with necessary screws etcetera complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 2 | Numbers | |
| 43 | 39 | Providing and fixing 150mm oxidized M.S. hsps and stapples (safty type ) with necessary screws complete Including carriage of materials within all leads, lifts and other incidentals. . | 13 | Numbers | |
| 44 | 40 | Providing and fixing oxidized M.S. hooks and eyes 150mm ( One Hundred fifty milimetre) including carriage of materials within all leads, lifts, and other incidentals as per the direction of Engineer-in-Charge. | 24 | Numbers, | |
| 45 | 41 | Providing and fixing 150mm (One hundred fifty milimetre) M.S. double acting spring hinges with necessary screws etcetera complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 2 | Numbers | |
| 46 | 42 | Providing automatically hydrocally compressed and polished cast terrazzo tiles flooring tiles size 30cmx30cm (Thirty Centimetre into thirty Centimetre) ISI marked No.1237 of shade 25mm (Twenty five milimetre) thick (with marble chips of specified sizes) laid in floors, treads of steps and landing on a bed of 25cm (Twenty five centimeter) average cement mortar 1:6 (One Cement is to Six Sand) jointed with neat cement slurry mixed with pigments to match the shade of including rubbing and polishing complete with tiles of medium shade with marble chips of specified, as per direction of the Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals. | 49.55 | Square metres | |
| 47 | 43 | Providing automatically hydrocally compressed and polished cast terrazzo tiles flooring tiles size 30cmx10cm (Thirty Centimetre into ten Centimetre) ISI marked No.1237 of shade 25mm (Twenty five milimetre) thick (with marble chips of specified sizes) laid in skirting and risers of steps not exceeding 30 cm in hight on 10mm thick cement mortar 1:3 (One Cement is to three Sand) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing and polishing complete with tiles of medium shade, as per direction of the Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals. | 4.51 | Square metres | |
| 48 | 44 | Providing Marble work ( table rubbed and Polished) in flooring 20mm (Twenty milimetre) thick base in cement mortor 1:3 (One Cement : Three Sand) including jointing with cement mortar 1:2 ( One White Cement : Two Marble dust) with an admixure of pigment to match the shade of the marble 20mm (Twenty milimetre) thick White makrana marble as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. | 4.73 | Sqm. | |
| 49 | 45 | White glazed tiles 6mm (Six milimetre) thick 20 x15cm (Twenty into Fifteen centimeter) in skirting risers of steps and dado 12mm (Twelve milimetre) thick cement mortar 1:3(One cement is to Three Sand) and jointed with cement slurry. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 44.73 | Square metres | |
| 50 | 46 | Providing and fixing on wall face PVC (D-Plast rain water pipe) working pressure not less than 4.50 kg./sqm (Four point five zero Kilogram/ Square metre) including filling the joints with approved adhesive complete 100mm (One hundred milimetre) nominal size. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 14 | Rmt | |
| 51 | 47 | Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete, within all leads, lifts of materials and other incidentals.\n\n | |||
| 52 | 47.1 | Plain bend 100mm(One hundred milimetre) dia.\n\n | 4 | Nos. | |
| 53 | 47.2 | Plain Shoe 100mm(One hundred milimetre) dia.\n\n | 4 | Nos. | |
| 54 | 48 | Providing and fixing(Single rebate) angle iron doors, windows, clearstory windows, frame manufactured from steel iron section of 40mmx40mmx4mm (forty milimetre into forty milimetre into four milimetre) thickness including hinges jamb, lock jamb, beeds and if required angle thrashold of mild steel M.S. flat 50x4mm (fifty into four milimetre) welded or rigidly fixed by mechanical means, lugs, with split and ails to each jamb including steel but hinges 2.5mm (two decimal fifty milimetre) thick with provision for locking arrangement and shock as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.\n | 24.4 | Running metres | |
| 55 | 49 | Providing and fixing M.S. channels for doors, windows, frames manufactured from M.S. section 75mmx40mmx 6mm (seventy five milimetre into forty milimetre into six milimetre) in combination as per drawing and design including hinges jamb, lock jamb beed and if required thrashold of mild steel M.S. flat 75x4mm (seventy five into four milimetre) thrashold of M.S. angles means lugs with split and tails to each jamb including iron butt hinges 2.5mm (two decimal five milimetre) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pretreatment of the surface, including carriage of materials within all leads, lifts and other incidentals. | 93.34 | Running metres | |
| 56 | 50 | Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16x3.15mm(Sixteen into three decimal fifteen milimetres) lungs 10cm (Ten centimetres) long embedded in cement concrete block 15x10x10cm(Fifteen into ten into ten centimetres) size of 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm (Twenty milimetres nominal size) or with wooden/steel plugs and screws or rawl plugs screws or with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass pans with glazing clips and special metal sesh putty of approved make complete including applying a coat of read lead paints within all leads, lifts of materials and other incidentals. | |||
| 57 | 50.1 | Fixed steel windows :- | 5.87 | Square metres | |
| 58 | 50.2 | Side hung windows :- | 9.54 | Square metres | |
| 59 | 50.3 | Top hung windows :- | 3.58 | Square metres | |
| 60 | 51 | Providing and fixing M.S. fan clamp type-I of 16mm (Sixteen milimetre) dia M.S. bar bent to shape with hooked ends in roof laid including painting the exposed portion of loop, all as per standard design complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals | 3 | Numbers | |
| 61 | 52 | 6mm (Six milimetre) thick cement plaster to ceiling with cement mortar 1:3 (One Cement is to Three Sand). The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 58.84 | Square metres | |
| 62 | 53 | 15mm (Fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) within all leads, lifts of materials and other incidentals.\n | 120.24 | Square metres | |
| 63 | 54 | Providing and fixing factory made double steel shutters, windows side hung core glazed and other wire gauge of standard rolled steel section jointing mitred and welded with manufactured to relevant ISI standard specification with 16mmx3.15mm (sixteen milimetre into three decimal fifteen milimetre) 20cm (twenty centimeter) long embedded in cement concrete blocks 15cmx10cmx10cm(fifteen centimeter into ten centimeter into ten centimeter) of size in cement concrete 1:3:6(one cement: three sand: six graded crushed stone aggregate 20mm (twenty milimetre) nominal size) with wooden plugs and screws with belts and huts as required including iron fittings, 3mm (three miliemtre) thick glass pans with special putty for glazed windows wire gauge of IS designation 85G with metal beeding complete including a priming coat of red lead paint as per direction of the Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.\n | 9.54 | Square metres | |
| 64 | 55 | 15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) within all leads, lifts of materials and other incidentals.\n | 48.65 | Square metres | |
| 65 | 56 | 15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:3 (One cement: Three sand) within all leads, lifts of materials and other incidentals.\n | 15.84 | Square metres | |
| 66 | 57 | Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer within all leads, lifts of materials and other incidentals.\n | 12.36 | Square metres | |
| 67 | 58 | Painting two coats (excluding priming on new concrete masonry/plaster surfaces with sythetic enamal paint brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required with paint other than white, including carriage of materials within all leads, lifts and other incidentals. | 12.36 | Square metres | |
| 68 | 59 | White washing with lime on undecorated wall surfaces (Two coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar droppings and other foreign matter. Including carriage of materials within all leads, lifts and other incidentals. | 81.39 | Square metres | |
| 69 | 60 | White washing with lime on ceiling and/or sloping roofs two coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter. Including carriage of materials within all leads, lifts and other incidentals. | 58.84 | Square metres | |
| 70 | 61 | Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning, oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink within all leads, lifts of materials and other incidentals. | 84.65 | Square metres | |
| 71 | 62 | Painting two coats (excluding priming costs) on new wood and wood based surfaces with enamel paint brushing to give an any shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping within all leads, lifts of materials and other incidentals. | 84.65 | Square metres | |
| 72 | 63 | Painting two coats (excluding priming costs)on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters within all leads, lifts of materials and other incidentals.\n | 30.38 | Square metres | |
| 73 | 64 | Providing under layer for plinth protection of 75mm(Seventy five milimetres) thick (un-consolidated) bed of dry brick/stone aggregate 40mm(Forty milimetres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground within all leads, lifts of materials and other incidentals. | 15.31 | Square metres | |
| 74 | 65 | Providing plinth protection 50mm(Fifty milimetres) thick cement concrete 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm(Twenty milimetres) nominal size) including finishing the top surfaces of concrete smooth, within all leads, lifts of materials and other incidentals | 15.31 | Square metres | |
| 75 | 66 | Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats_ to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. Including carriage of materials within all leads, lifts and other incidentals. | 48.65 | Square metres | |
| 76 | 67 | Construction course rubble hammer dressed ‘U’ shape open surfaces drain with side wall 15x23cms (Fifteen into twenty three centimeters) in cement mortar 1:6 (One cement: Six sand) and inside plastering with cement plaster 1:3(one cement: three sand) including earth work and laying 10cm (Ten centimeters) cement concrete in 1:5:10 (One cement: Five sand: Ten graded) crushed stone aggregate 40mm(Forty millimeters) nominal size and 7.5cm (Seven decimal five centimetres)cement concrete 1:2:4 (One cement: Two sand: Four graded) crushed stone aggregate 20mm(Twenty millimeters) nominal size and finished with a floating cost of neat cement complete as per standard design within all leads, lifts of materials and other incidentals \n\n | 35.82 | Running metres | |
| 77 | 68 | Providing and fixing vitreous China wash down water closet (European type W.C. Pen) with integral P or S trap I/c jointing the trap with soil pipe in cement mortar 1:1 (one cement : 1 sand) (Seat and over to be measured and paid for separately) including carriage of materials within all leads, lifts, and other incidentals. | 1 | Nos | |
| 78 | 69 | Providing and fixing orrissa pattern vitreous china water closet squatting pan (Indian type W.C. pan ) size 580mm x440mm (five hundred eighty milimetre into four hundred forty mimilimetre) (earth work bed concrete, and trap to be measured and paid for seperately ) including carriage of materials within all leads, lifts and other incidentals as per the direction of Engineer-in-Charge. | 1 | Numbers | |
| 79 | 70 | Providing and fixing 10 litres capacity P.V.C. low level flushing cistern with a pair of G.I or mild steel brackets complete with fitting such as lead volve less syphon, 15 mm nominal size brass bass valve with polythene float, CP brass handle unions and couplings for connections with inlet, outlet & overflow pipes, 40mm (Forty milimetre)dia. CP flush bend i/c cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately. | 2 | Numbers | |
| 80 | 71 | Providing and fixing 100mm ( One hundred milimetre) sand cast iron P or S trap for water closet including jointing the trap with W.C. Pan in cement mortar 1:1 (One Cement: One Sand). The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.\n | 2 | No. | |
| 81 | 72 | Providing and fixing G.I inlet connection flush pipe with W.C pan. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 2 | No. | |
| 82 | 73 | Providing and fixing 610 x460 mm with bowl depth 200 mm stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 2 | No. | |
| 83 | 74 | Providing and fixing white hollow plastic seat and cover for wash down water closet with C.P. Brass hinges and rubber buffers. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 1 | No. | |
| 84 | 75 | Providing and fixing Flat Back 630x450 mm vitreous China wash basin with single hole for pillar tap with C I or M.S . Brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials within all leads, lifts, and other incidentals. | 2 | Nos | |
| 85 | 76 | Providing and fixing 32mm (Thirty two milimetre) dia nominal size C./P. Brass waste for wash basin or sink including carriage of materials within all leads and lifts of materials and other incidentals . | 4 | Number | |
| 86 | 77 | Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.\n | 5 | Nos. | |
| 87 | 78 | Providing and fixing 32mm (Thirty two milimetre) dia C.P. Brass S. Trap for wash basin and sink including carriage of materials within all leads and lifts of materials and other incidentals . | 4 | Number | |
| 88 | 79 | Providing and fixing 32mm (Thirty two milimetre) dia PVC waste pipe for wash basin or sink including carriage of materials within all leads and lifts of materials and other incidentals . | 4 | Nos. | |
| 89 | 80 | Providing and fixing 600mmx 450mm (Five hundred fifty milimetre into four hundred fifty milimetre) bevelled edge Mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P Brass screws and washers . The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 2 | Number | |
| 90 | 81 | Providing and fixing 600x20mm (Six hundred into twenty milimetre) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. Brass screws . The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 2 | Number | |
| 91 | 82 | Providing and fixing 600x120mm (Six hundred into One hundred twenty milimetre) glass shelf with C.P. brass brackets and guard rail complete, fixed to wooden plugs with C.P. Brass screws. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 2 | Number | |
| 92 | 83 | Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. Brass screws . The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 5 | Nos. | |
| 93 | 84 | Providing and fixing 15mm (Fifteen milimetre) diametres C.P. bib tap with capstan head. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 5 | Nos. | |
| 94 | 85 | Providing and Fixing 15mm dia C.P. Brass Pillar Tap with Capstan head within all leads, lifts of materials and other incidentals. | 2 | No. | |
| 95 | 86 | Providing and fixing 15mm (Fifteen milimetre) dia cansealed C.P brass stop cock . The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 5 | Number | |
| 96 | 87 | Providing and fixing brass full way valve with wheel 15mm ( fifteen milimetre)nominal bore.The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 1 | Nos. | |
| 97 | 88 | Providing and fixing 500 litres net capacity tank PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level .The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 1 | No. | |
| 98 | 89 | Providing and fixing to wall ceiling and floor galvanised mild steel tube ( medium grade ) to be fixed with clamps including making good the walls, ceiling and floor including carriage of materials within all leads and lifts of materials and other incidentals . | |||
| 99 | 89.1 | 15mm (Fifteen milimetre) nominal diametre | 55 | Rmt. | |
| 100 | 89.2 | 20mm (Twenty milimetre) nominal diametre | 25 | Rmt. | |
| 101 | 90 | Providing and fixing sand cast / cast iron spun spigot and socket soil, waste and ventilating pipes (Lead caulked joints to be measured and paid for separately including entire carriage of materials within all leads and lifts as per directions of Engineer-in-Charge. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.\n | |||
| 102 | 90.1 | i) 100mm (one hundred millimetre) nominal size \n\n\n | 21.8 | Per running metre | |
| 103 | 90.2 | ii) 75mm (Seventy five millimeter) nominal size.\n\n\n | 5.5 | Per running metre | |
| 104 | 91 | Providing and fixing sand cast iron / cast iron spun fitting and plain bend with oval access door, insertion rubber washer 2mm ( Two milimetre) thick bolts and nuts complete including carriage of materials within all leads and lifts of materials and other incidentals . | |||
| 105 | 91.1 | 100mm (One hundred milimetre) nominal size. | 4 | Nos. | |
| 106 | 91.2 | 75mm (Seventy five milimetre) nominal size. | 2 | Nos. | |
| 107 | 92 | P/L in trenches galvanized mild steel tubes (medium grade tube) fittings (earth work in trenches to be measured and paid for separately) 20mm (Twenty milimetre) nominal bore. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 40 | Rmt | |
| 108 | 93 | Providng and fixing 100 mm(one hundred milimetre) nominal diametre cast iron cowl including carriage of material within all leads,lifts and other incidentals. | 2 | No. | |
| 109 | 94 | Providing and fixing sand cast iron / cast iron Collars .The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | |||
| 110 | 94.1 | i) 100mm (One hundred milimetre) nominal size | 4 | Nos. | |
| 111 | 94.2 | ii) 75mm (Seventy five milimetre) nominal size | 3 | Nos. | |
| 112 | 95 | Providing lead caulked joined to sand cast iron/ cast (spun) iron pipes and filtings including testing of joints 100mm (One hundred milimetre) size diameter including carriage of materials within all leads and lifts of materials and other incidentals . | |||
| 113 | 95.1 | i) 100mm (One hundred milimetre) nominal size | 14 | Nos. | |
| 114 | 95.2 | ii) 75mm (Seventy five milimetre) nominal size | 3 | Nos. | |
| 115 | 96 | Constructing manhole with R.C.C top slab 1:2:4 (One cement : Two sand :Four graded stone aggregate 20 mm(Twenty milimetre nominal size) foundation concrete 1:4:8 (One cement : Four sand : eight graded stone aggregate 40mm (forty milimetre) nominal size inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 ( One cement: Three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement :Two sand :Four graded stone aggregate 20mm (Twenty milimetre) nominal size finished smooth complete including curring and Testing: inside 800mmx800mm and 500mm (eight hundred milimetre into eight hundred milimetre and five hundred milimetre) deep including C.I cover and frame (light duty) single (seal pattern-1) 455mmx610mm internal diametre, total weight of cover and frame to be not less then 38Kg. ( weight of cover23 Kg. and weight of frame 15Kg. with 300mm thick walls of squared rubble masonry coursed with hard stones of approved quality in cement Mortar 1:3 ( One Cement : three Sand) including carriage of material within all leads, lifts and other incidentals. | 4 | Nos. | |
| 116 | 97 | Providing and fixing 75mm (Seventy five milimetre) nominal diametre cast iron floor traps of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making good the walls and floors. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.\n | 5 | No. | |
| 117 | 98 | Providing and fixing 455mmx610mm Light duty Rectangular C.I. Hole with frame cover weight 38Kg. (tyhirty eight Kilogram) (Single Seal). The rate inclusive for carriage of material within all leads, lifts and other incidentals. | 1 | Nos. | |
| 118 | 99 | Providing and fixing 200mm (Two hundred milimetre) wide cast iron rungs with chequred or ribbed non slip surface including fixing in septic tank with 200mmx200mmx10mm (Two hundred milimetre into two hundred milimetre into ten milimetre) cement concrete 1:3:6 (One Cement: Three Sand: Six graded stone aggregate 20mm nominal size). The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 6 | Nos. |
AI Tender Summary
Tender Timeline
May 08, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMay 22, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 22, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender