Communications and Information Technology  Government Departments Closing in 0 days TDR #24276572

Supply Of Electronics Equipment

Issued by Government Departments · , Karnataka
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 May 2020
0 days left
EMD
500
Bank guarantee accepted
Document Fee
550
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
→ Karnataka
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Supply Of Electronics Equipment 1. Trainer Kit : Liner/ Analog Ic Trainer Kit Features, Logic Input Switches With Dual Colour Led S, Logic Output Dual Colour Led S 16/28/40 Pin Zif Socket, Bread Board 7 Segment Displays For Bcd Inputs Ttl Clock 6 Decay S Mono Pulse, 2. Dc Fixed Regulated Power Supply : 12V/ 5V, 3. Dc Regulated Variable Power Supply (0 30V/2A), Short Circuit Protected, Specification Output Voltage : 0 - 30 Volts (Any Voltage) Output Current : 0 - 2 Amps (Any Cuurrent) Mode Of Operation : Cv / Cc, Ripple : 2Mv, Load Regulation : 0.01% ±5Mv, Line Regulation : 0.01% ±5Mv, Stability : 0.01% After 30Min Warm-Up, Input Voltage : 230V 50Hz ±10% Variation Operating Temparature : 0 60 C, 4. Signal Generator: 3Mhz Variable Frequency. Waves: Sine, Square, Triangle, Pulse. Frequency Variable. Amplitude Variable. Frequency Must Be Displayed On Lcd. 20Db & 40Db Attenuation. Ttl Output. Frequency Selectable Switches For Different Range (0Hz-1Khz, 1Khz-100Khz, 100Khz-3Mhz). Dc Offset Variable., 5. Cathode Ray Oscilloscope: Cro Features Bandwidth : Dc-30 Mhz (-3 Db) Dc Coupled, 10 Hz To 30 Mhz (-3 Db) Ac Coupled, Channels : 2 Channels Input Impedance : 1 Mw Ii 25 Pf, Input Coupling : Dc-Ac-Gnd, Display : 5 Digit 7 Seg. Led Cathode Ray Tube: 140 Mm Rect Flat Face With Internal Graticule And Mu Metal Shielding, 6. Digital Ic Trainer Kit: Regulated Power Supply Of +5V/1 Amps. 8 Logic Input Switches (Bounceless) 10 Output Indicators(Buffered) Clock Generator ( 0.1,1,10 &100Hz) Seven Segment Display With Decoder Ic 7447, Special Ic Bases Of 14 & 16 Pins, For Mounting Any Ic 10 Different Ic(74Ls00,74Ls02,7404,7408, 74Ls32,7486,7474, 74Ls76,7490,7485 ) Are Provided To Perform Experiments On Logic Gates, Flip-Flops, Counter, Shift-Registers, Full Adder Etc. Complete With 25 Interconnection Leads Per Kit & Manual. Provision For Breadboard Mounting Is Also Provided., 7. Patch Cards (500 No S), 8. 8051 Microcontroller Kit:Pic 8051 With Lcd Usb Upload, 9. Arm Microcontroller Kit:Arm7 Lpc2148 With Lcd Usb Upload, 10. Toggle Switch Interfacing Board, Rs232 Cable Dc Motor Interfacing Board, 4X4 Keyboard On Lcd Interfacing Board, Stepper Motor Interfacing Board Adc0804 Interfacing Board, 7 Segment Led Interface, Dac Interface Board For Waveform Generator, 11. Analog And Digital Ic Tester Digital Ic Tester With 40 Pin Digital Ic Tester With 16 Digit 7 Segment Led Display And 24 Keys Keyboard, 12. Digital Multimeter : Digital Multimeter 3 1/2 Digit, 13. Benq Ms506p Projector Dlp Portable Type Of Digital Projector, Resolution Svga (800 X 600 Lamp Features, Illumination 3200, Contrast Ratio 13000:1, Aspect Ratio 4:3, Minimum Image Size 60 Inches Generated, Maximum Image Size 300 Inches Generated, Life Of Lamp In Eco Mode(Hours) 6500, Life Of Lamp In Standard Mode(Hours) 4000, Convenience Features Lens Shift, Zoom Lens, Digital Keystone Correction, Remote Control, On Screen Display, Compatibility, Hdtv, Ntsc/Pal Playback, Secam, Connectivity Usb Port, Vga Input, S Video Input, Total Power Requirement Consumption 270Watts, 14. Trainer Kit : Liner/ Analog Ic Trainer Kit Features, Logic Input Switches With Dual Colour Led S, Logic Output Dual Colour Led S 16/28/40 Pin Zif Socket, Bread Board 7 Segment Displays For Bcd Inputs Ttl Clock 6 Decays Mono Pulse, 15. Dc Fixed Regulated Power Supply : ±12V/±5V, 16. Dc Regulated Variable Power Supply (0-30V/2A), Short Circuit Protected, Specification Output Voltage : 0 - 30 Volts (Any Voltage) Output Current : 0 - 2 Amps (Any Cuurrent) Mode Of Operation : Cv / Cc, Ripple : 2Mv, Load Regulation : 0.01% ±5Mv, Line Regulation : 0.01% ±5Mv, Stability : 0.01% After 30Min Warmup, Input Voltage : 230V 50Hz ±10% Variation Operating Temparature : 0 - 60C, 17. Cathode Ray Oscilloscope: Cro Features Bandwidth : Dc-30 Mhz (-3 Db) Dc Coupled, 10 Hz To 30 Mhz (-3 Db) Ac Coupled, Channels : 2 Channels Input Impedance : 1 Mw Ii 25 Pf, Input Coupling : Dc-Ac-Gnd, Display : 5 Digit 7 Seg. Led Cathode Ray Tube: 140 Mm Rect Flat Face With Internal Graticule And Mu Metal Shielding, 18. Signal Generator: 3Mhz Variable Frequency. Waves: Sine, Square, Triangle, Pulse. Frequency Variable. Amplitude Variable. Frequency Must Be Displayed On Lcd. 20Db & 40Db Attenuation. Ttl Output. Frequency Selectable Switches For Different Range (0Hz-1Khz, 1Khz-100Khz, 100Khz-3Mhz). Dc Offset Variable., 19. Digital Ic Trainer Kit: Regulated Power Supply Of +5V/1 Amps. 8 Logic Input Switches (Bounceless) 10 Output Indicators(Buffered) Clock Generator ( 0.1,1,10 &100Hz) Seven Segment Display With Decoder Ic 7447, Special Ic Bases Of 14 & 16 Pins, For Mounting Any Ic 10 Different Ic(74Ls00,74Ls02,7404,7408, 74Ls32,7486,7474, 74Ls76,7490,7485 ) Are Provided To Perform Experiments On Logic Gates, Flip-Flops, Counter, Shift-Registers, Full Adder Etc. Complete With 25 Interconnection Leads Per Kit & Manual. Provision For Breadboard Mounting Is Also Provided., 20. Patch Cards (500 No S), 21. 8051 Microcontroller Kit:Pic 8051 With Lcd Usb Upload, 22. Arm Microcontroller Kit:Arm7 Lpc2148 With Lcd Usb Upload, 23. Toggle Switch Interfacing Board, Rs232 Cable Dc Motor Interfacing Board, 4X4 Keyboard On Lcd Interfacing Board, Stepper Motor Interfacing Board Adc-0804 Interfacing Board, 7 Segment Led Interface, Dac Interface Board For Waveform Generator, 24. Analog And Digital Ic Tester Digital Ic Tester With 40 Pin Digital Ic Tester With 16 Digit 7 Segment Led Display And 24 Keys Keyboard, 25. Digital Multimeter : Digital Multimeter 3 1/2 Digit, 26. Benq Ms506p Projector:- Dlp Portable Type Of Digital Projector, Resolution Svga (800 X 600 Lamp Features, Illumination 3200, Contrast Ratio 13000:1, Aspect Ratio 4:3, Minimum Image Size 60 Inches Generated, Maximum Image Size 300 Inches Generated, Life Of Lamp In Eco Mode(Hours) 6500, Life Of Lamp In Standard Mode(Hours) 4000, Convenience Features Lens Shift, Zoom Lens, Digital Keystone Correction, Remote Control, On Screen Display, Compatibility, Hdtv, Ntsc/Pal Playback, Secam, Connectivity Usb Port, Vga Input, S-Video Input, Total Power Requirement Consumption 270Watts, 27. Benq Ms506p Projector:- Dlp Portable Type Of Digital Projector, Resolution Svga (800 X 600 Lamp Features, Illumination 3200, Contrast Ratio 13000:1, Aspect Ratio 4:3, Minimum Image Size 60 Inches Generated, Maximum Image Size 300 Inches Generated, Life Of Lamp In Eco Mode(Hours) 6500, Life Of Lamp In Standard Mode(Hours) 4000, Convenience Features Lens Shift, Zoom Lens, Digital Keystone Correction, Remote Control, On Screen Display, Compatibility, Hdtv, Ntsc/Pal Playback, Secam, Connectivity Usb Port, Vga Input, S-Video Input, Total Power Requirement Consumption 270Watts,

BOQ

Sl No Item Code Item Name Item Description Unit Quantity
1
01/TEND/2020/RK/70/01 Trainer Kit : Liner/ Analog IC trainer Kit Features, Logic input switches with dual colour LED s, Logic output dual colour LED s 16/28/40 pin Zif socket, Bread Board 7 Segment displays for BCD inputs TTL Clock 6 Decay s Mono Pulse Specification: As specified in the tender document.
Nos
9
2
01/TEND/2020/RK/70/02 DC Fixed regulated power supply : 12V/ 5V Specification: As specified in the tender document.
Nos
15
3
01/TEND/2020/RK/70/03 DC Regulated Variable Power Supply (0 30V/2A), Short Circuit Protected, Specification OUTPUT VOLTAGE : 0 - 30 VOLTS (ANY VOLTAGE) OUTPUT CURRENT : 0 - 2 AMPS (ANY CUURRENT) MODE OF OPERATION : CV / CC, RIPPLE : 2mV, LOAD REGULATION : 0.01% ±5mV, LINE REGULATION : 0.01% ±5mV, STABILITY : 0.01% AFTER 30MIN WARM-UP, INPUT VOLTAGE : 230V 50hz ±10% VARIATION OPERATING TEMPARATURE : 0 60 C Specification: As specified in the tender document.
Nos
10
4
01/TEND/2020/RK/70/04 Signal Generator: 3MHz Variable Frequency. Waves: Sine, Square, Triangle, Pulse. Frequency Variable. Amplitude Variable. Frequency must be displayed on LCD. 20db & 40db Attenuation. TTL Output. Frequency Selectable Switches for different range (0Hz-1KHz, 1KHz-100KHz, 100KHz-3MHz). DC OFFSET Variable. Specification: As specified in the tender document.
Nos
15
5
01/TEND/2020/RK/70/05 Cathode Ray Oscilloscope: CRO Features Bandwidth : DC-30 MHz (-3 dB) DC coupled, 10 Hz to 30 MHz (-3 dB) AC coupled, Channels : 2 Channels Input Impedance : 1 MW II 25 pF, Input Coupling : DC-AC-GND, Display : 5 digit 7 seg. LED Cathode Ray Tube: 140 mm rect flat face with internal graticule and Mu metal shielding Specification: As specified in the tender document.
Nos
7
6
01/TEND/2020/RK/70/06 Digital IC Trainer Kit: Regulated power supply of +5V/1 Amps. 8 logic input switches (Bounceless) 10 output indicators(Buffered) Clock Generator ( 0.1,1,10 &100Hz) seven segment display with decoder IC 7447, Special IC bases of 14 & 16 Pins, for mounting any IC 10 different IC(74LS00,74LS02,7404,7408, 74LS32,7486,7474, 74LS76,7490,7485 ) are provided to perform experiments on logic gates, flip-flops, Counter, Shift-registers, full adder etc. Complete with 25 interconnection Leads per KIT & Manual. Provision for Breadboard mounting is also provided. Specification: As specified in the tender document.
Nos
9
7
01/TEND/2020/RK/70/07 Patch cards (500 No s) Specification: As specified in the tender document.
Nos
500
8
01/TEND/2020/RK/70/08 8051 Microcontroller Kit:PIC 8051 WITH LCD USB upload Specification: As specified in the tender document.
Nos
9
9
01/TEND/2020/RK/70/09 ARM Microcontroller Kit:ARM7 LPC2148 WITH LCD USB upload Specification: As specified in the tender document.
Nos
9
10
01/TEND/2020/RK/70/010 Toggle Switch Interfacing Board, RS232 Cable DC Motor Interfacing Board, 4x4 Keyboard on LCD Interfacing Board, Stepper Motor Interfacing Board ADC0804 Interfacing Board, 7 Segment LED Interface, DAC Interface Board for waveform generator Specification: As specified in the tender document.
Nos
7
11
01/TEND/2020/RK/70/011 Analog and Digital IC tester Digital IC Tester with 40 pin Digital IC tester with 16 digit 7 segment LED Display and 24 keys keyboard Specification: As specified in the tender document.
Nos
1
12
01/TEND/2020/RK/70/12 Digital Multimeter : Digital Multimeter 3 1/2 digit Specification: As specified in the tender document.
Nos
10
13
01/TEND/2020/RK/70/013 BENQ MS506P PROJECTOR DLP Portable Type Of Digital Projector, Resolution SVGA (800 x 600 Lamp Features, Illumination 3200, contrast ratio 13000:1, Aspect ratio 4:3, Minimum Image Size 60 inches Generated, Maximum Image Size 300 inches Generated, Life of Lamp In Eco Mode(Hours) 6500, Life of Lamp In Standard Mode(Hours) 4000, Convenience Features Lens Shift, Zoom Lens, Digital Keystone Correction, Remote Control, On Screen Display, Compatibility, HDTV, NTSC/PAL Playback, SECAM, Connectivity USB Port, VGA Input, S Video Input, Total Power Requirement Consumption 270Watts Specification: As specified in the tender document.
Nos
2
14
01/TEND/2020/RK/70/14 Trainer Kit : Liner/ Analog IC trainer Kit Features, Logic input switches with dual colour LED s, Logic output dual colour LED s 16/28/40 pin Zif socket, Bread Board 7 Segment displays for BCD inputs TTL Clock 6 Decays Mono Pulse Specification: As specified in the tender document.
Nos
12
15
01/TEND/2020/RK/70/015 DC Fixed regulated power supply : ±12V/±5V Specification: As specified in the tender document.
Nos
15
16
01/TEND/2020/RK/70/016 DC Regulated Variable Power Supply (0-30V/2A), Short Circuit Protected, Specification OUTPUT VOLTAGE : 0 - 30 VOLTS (ANY VOLTAGE) OUTPUT CURRENT : 0 - 2 AMPS (ANY CUURRENT) MODE OF OPERATION : CV / CC, RIPPLE : 2mV, LOAD REGULATION : 0.01% ±5mV, LINE REGULATION : 0.01% ±5mV, STABILITY : 0.01% AFTER 30MIN WARMUP, INPUT VOLTAGE : 230V 50hz ±10% VARIATION OPERATING TEMPARATURE : 0 - 60C Specification: As specified in the tender document.
Nos
12
17
01/TEND/2020/RK/70/017 Cathode Ray Oscilloscope: CRO Features Bandwidth : DC-30 MHz (-3 dB) DC coupled, 10 Hz to 30 MHz (-3 dB) AC coupled, Channels : 2 Channels Input Impedance : 1 MW II 25 pF, Input Coupling : DC-AC-GND, Display : 5 digit 7 seg. LED Cathode Ray Tube: 140 mm rect flat face with internal graticule and Mu metal shielding Specification: As specified in the tender document.
Nos
10
18
01/TEND/2020/RK/70/17 Signal Generator: 3MHz Variable Frequency. Waves: Sine, Square, Triangle, Pulse. Frequency Variable. Amplitude Variable. Frequency must be displayed on LCD. 20db & 40db Attenuation. TTL Output. Frequency Selectable Switches for different range (0Hz-1KHz, 1KHz-100KHz, 100KHz-3MHz). DC OFFSET Variable. Specification: As specified in the tender document.
Nos
15
19
01/TEND/2020/RK/70/019 Digital IC Trainer Kit: Regulated power supply of +5V/1 Amps. 8 logic input switches (Bounceless) 10 output indicators(Buffered) Clock Generator ( 0.1,1,10 &100Hz) seven segment display with decoder IC 7447, Special IC bases of 14 & 16 Pins, for mounting any IC 10 different IC(74LS00,74LS02,7404,7408, 74LS32,7486,7474, 74LS76,7490,7485 ) are provided to perform experiments on logic gates, flip-flops, Counter, Shift-registers, full adder etc. Complete with 25 interconnection Leads per KIT & Manual. Provision for Breadboard mounting is also provided. Specification: As specified in the tender document.
Nos
9
20
01/TEND/2020/RK/70/020 Patch cards (500 No s) Specification: As specified in the tender document.
Nos
500
21
01/TEND/2020/RK/70/021 8051 Microcontroller Kit:PIC 8051 WITH LCD USB upload Specification: As specified in the tender document.
Nos
9
22
01/TEND/2020/RK/70/022 ARM Microcontroller Kit:ARM7 LPC2148 WITH LCD USB upload Specification: As specified in the tender document.
Nos
9
23
01/TEND/2020/RK/70/023 Toggle Switch Interfacing Board, RS232 Cable DC Motor Interfacing Board, 4x4 Keyboard on LCD Interfacing Board, Stepper Motor Interfacing Board ADC-0804 Interfacing Board, 7 Segment LED Interface, DAC Interface Board for waveform generator Specification: As specified in the tender document.
Nos
7
24
01/TEND/2020/RK/70/024 Analog and Digital IC tester Digital IC Tester with 40 pin Digital IC tester with 16 digit 7 segment LED Display and 24 keys keyboard Specification: As specified in the tender document.
Nos
1
25
01/TEND/2020/RK/70/025 Digital Multimeter : Digital Multimeter 3 1/2 digit Specification: As specified in the tender document.
Nos
15
26
01/TEND/2020/RK/70/26 BENQ MS506P PROJECTOR:- DLP Portable Type Of Digital Projector, Resolution SVGA (800 x 600 Lamp Features, Illumination 3200, contrast ratio 13000:1, Aspect ratio 4:3, Minimum Image Size 60 inches Generated, Maximum Image Size 300 inches Generated, Life of Lamp In Eco Mode(Hours) 6500, Life of Lamp In Standard Mode(Hours) 4000, Convenience Features Lens Shift, Zoom Lens, Digital Keystone Correction, Remote Control, On Screen Display, Compatibility, HDTV, NTSC/PAL Playback, SECAM, Connectivity USB Port, VGA Input, S-Video Input, Total Power Requirement Consumption 270Watts Specification: As specified in the tender document.
Nos
2
27
01/TEND/2020/RK/70/027 BENQ MS506P PROJECTOR:- DLP Portable Type Of Digital Projector, Resolution SVGA (800 x 600 Lamp Features, Illumination 3200, contrast ratio 13000:1, Aspect ratio 4:3, Minimum Image Size 60 inches Generated, Maximum Image Size 300 inches Generated, Life of Lamp In Eco Mode(Hours) 6500, Life of Lamp In Standard Mode(Hours) 4000, Convenience Features Lens Shift, Zoom Lens, Digital Keystone Correction, Remote Control, On Screen Display, Compatibility, HDTV, NTSC/PAL Playback, SECAM, Connectivity USB Port, VGA Input, S-Video Input, Total Power Requirement Consumption 270Watts Specification: As specified in the tender document.
Nos
3

AI Tender Summary

OUR REF NO 24276572
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 13-05-2020
Authority
Authority Name Karnataka State Electronics Development Corporation Limited
Work Description Supply Of Electronics Equipment 1. Trainer Kit : Liner/ Analog Ic Trainer Kit Features, Logic Input Switches With Dual Colour Led S, Logic Output Dual Colour Led S 16/28/40 Pin Zif Socket, Bread Board 7 Segment Displays For Bcd Inputs Ttl Clock 6 Decay S Mono Pulse, 2. Dc Fixed Regulated Power Supply : 12V/ 5V, 3. Dc Regulated Variable Power Supply (0 30V/2A), Short Circuit Protected, Specification Output Voltage : 0 - 30 Volts (Any Voltage) Output Current : 0 - 2 Amps (Any Cuurrent) Mode Of Operation : Cv / Cc, Ripple : 2Mv, Load Regulation : 0.01% ±5Mv, Line Regulation : 0.01% ±5Mv, Stability : 0.01% After 30Min Warm-Up, Input Voltage : 230V 50Hz ±10% Variation Operating Temparature : 0 60 C, 4. Signal Generator: 3Mhz Variable Frequency. Waves: Sine, Square, Triangle, Pulse. Frequency Variable. Amplitude Variable. Frequency Must Be Displayed On Lcd. 20Db & 40Db Attenuation. Ttl Output. Frequency Selectable Switches For Different Range (0Hz-1Khz, 1Khz-100Khz, 100Khz-3Mhz). Dc Offset Variable., 5. Cathode Ray Oscilloscope: Cro Features Bandwidth : Dc-30 Mhz (-3 Db) Dc Coupled, 10 Hz To 30 Mhz (-3 Db) Ac Coupled, Channels : 2 Channels Input Impedance : 1 Mw Ii 25 Pf, Input Coupling : Dc-Ac-Gnd, Display : 5 Digit 7 Seg. Led Cathode Ray Tube: 140 Mm Rect Flat Face With Internal Graticule And Mu Metal Shielding, 6. Digital Ic Trainer Kit: Regulated Power Supply Of +5V/1 Amps. 8 Logic Input Switches (Bounceless) 10 Output Indicators(Buffered) Clock Generator ( 0.1,1,10 &100Hz) Seven Segment Display With Decoder Ic 7447, Special Ic Bases Of 14 & 16 Pins, For Mounting Any Ic 10 Different Ic(74Ls00,74Ls02,7404,7408, 74Ls32,7486,7474, 74Ls76,7490,7485 ) Are Provided To Perform Experiments On Logic Gates, Flip-Flops, Counter, Shift-Registers, Full Adder Etc. Complete With 25 Interconnection Leads Per Kit & Manual. Provision For Breadboard Mounting Is Also Provided., 7. Patch Cards (500 No S), 8. 8051 Microcontroller Kit:Pic 8051 With Lcd Usb Upload, 9. Arm Microcontroller Kit:Arm7 Lpc2148 With Lcd Usb Upload, 10. Toggle Switch Interfacing Board, Rs232 Cable Dc Motor Interfacing Board, 4X4 Keyboard On Lcd Interfacing Board, Stepper Motor Interfacing Board Adc0804 Interfacing Board, 7 Segment Led Interface, Dac Interface Board For Waveform Generator, 11. Analog And Digital Ic Tester Digital Ic Tester With 40 Pin Digital Ic Tester With 16 Digit 7 Segment Led Display And 24 Keys Keyboard, 12. Digital Multimeter : Digital Multimeter 3 1/2 Digit, 13. Benq Ms506p Projector Dlp Portable Type Of Digital Projector, Resolution Svga (800 X 600 Lamp Features, Illumination 3200, Contrast Ratio 13000:1, Aspect Ratio 4:3, Minimum Image Size 60 Inches Generated, Maximum Image Size 300 Inches Generated, Life Of Lamp In Eco Mode(Hours) 6500, Life Of Lamp In Standard Mode(Hours) 4000, Convenience Features Lens Shift, Zoom Lens, Digital Keystone Correction, Remote Control, On Screen Display, Compatibility, Hdtv, Ntsc/Pal Playback, Secam, Connectivity Usb Port, Vga Input, S Video Input, Total Power Requirement Consumption 270Watts, 14. Trainer Kit : Liner/ Analog Ic Trainer Kit Features, Logic Input Switches With Dual Colour Led S, Logic Output Dual Colour Led S 16/28/40 Pin Zif Socket, Bread Board 7 Segment Displays For Bcd Inputs Ttl Clock 6 Decays Mono Pulse, 15. Dc Fixed Regulated Power Supply : ±12V/±5V, 16. Dc Regulated Variable Power Supply (0-30V/2A), Short Circuit Protected, Specification Output Voltage : 0 - 30 Volts (Any Voltage) Output Current : 0 - 2 Amps (Any Cuurrent) Mode Of Operation : Cv / Cc, Ripple : 2Mv, Load Regulation : 0.01% ±5Mv, Line Regulation : 0.01% ±5Mv, Stability : 0.01% After 30Min Warmup, Input Voltage : 230V 50Hz ±10% Variation Operating Temparature : 0 - 60C, 17. Cathode Ray Oscilloscope: Cro Features Bandwidth : Dc-30 Mhz (-3 Db) Dc Coupled, 10 Hz To 30 Mhz (-3 Db) Ac Coupled, Channels : 2 Channels Input Impedance : 1 Mw Ii 25 Pf, Input Coupling : Dc-Ac-Gnd, Display : 5 Digit 7 Seg. Led Cathode Ray Tube: 140 Mm Rect Flat Face With Internal Graticule And Mu Metal Shielding, 18. Signal Generator: 3Mhz Variable Frequency. Waves: Sine, Square, Triangle, Pulse. Frequency Variable. Amplitude Variable. Frequency Must Be Displayed On Lcd. 20Db & 40Db Attenuation. Ttl Output. Frequency Selectable Switches For Different Range (0Hz-1Khz, 1Khz-100Khz, 100Khz-3Mhz). Dc Offset Variable., 19. Digital Ic Trainer Kit: Regulated Power Supply Of +5V/1 Amps. 8 Logic Input Switches (Bounceless) 10 Output Indicators(Buffered) Clock Generator ( 0.1,1,10 &100Hz) Seven Segment Display With Decoder Ic 7447, Special Ic Bases Of 14 & 16 Pins, For Mounting Any Ic 10 Different Ic(74Ls00,74Ls02,7404,7408, 74Ls32,7486,7474, 74Ls76,7490,7485 ) Are Provided To Perform Experiments On Logic Gates, Flip-Flops, Counter, Shift-Registers, Full Adder Etc. Complete With 25 Interconnection Leads Per Kit & Manual. Provision For Breadboard Mounting Is Also Provided., 20. Patch Cards (500 No S), 21. 8051 Microcontroller Kit:Pic 8051 With Lcd Usb Upload, 22. Arm Microcontroller Kit:Arm7 Lpc2148 With Lcd Usb Upload, 23. Toggle Switch Interfacing Board, Rs232 Cable Dc Motor Interfacing Board, 4X4 Keyboard On Lcd Interfacing Board, Stepper Motor Interfacing Board Adc-0804 Interfacing Board, 7 Segment Led Interface, Dac Interface Board For Waveform Generator, 24. Analog And Digital Ic Tester Digital Ic Tester With 40 Pin Digital Ic Tester With 16 Digit 7 Segment Led Display And 24 Keys Keyboard, 25. Digital Multimeter : Digital Multimeter 3 1/2 Digit, 26. Benq Ms506p Projector:- Dlp Portable Type Of Digital Projector, Resolution Svga (800 X 600 Lamp Features, Illumination 3200, Contrast Ratio 13000:1, Aspect Ratio 4:3, Minimum Image Size 60 Inches Generated, Maximum Image Size 300 Inches Generated, Life Of Lamp In Eco Mode(Hours) 6500, Life Of Lamp In Standard Mode(Hours) 4000, Convenience Features Lens Shift, Zoom Lens, Digital Keystone Correction, Remote Control, On Screen Display, Compatibility, Hdtv, Ntsc/Pal Playback, Secam, Connectivity Usb Port, Vga Input, S-Video Input, Total Power Requirement Consumption 270Watts, 27. Benq Ms506p Projector:- Dlp Portable Type Of Digital Projector, Resolution Svga (800 X 600 Lamp Features, Illumination 3200, Contrast Ratio 13000:1, Aspect Ratio 4:3, Minimum Image Size 60 Inches Generated, Maximum Image Size 300 Inches Generated, Life Of Lamp In Eco Mode(Hours) 6500, Life Of Lamp In Standard Mode(Hours) 4000, Convenience Features Lens Shift, Zoom Lens, Digital Keystone Correction, Remote Control, On Screen Display, Compatibility, Hdtv, Ntsc/Pal Playback, Secam, Connectivity Usb Port, Vga Input, S-Video Input, Total Power Requirement Consumption 270Watts,
Basic Detail
Tender No KSEDCL/ITS-RK/70/2020-2021
Bidding Type Tender
Location
City
State Karnataka
Key Dates
Publish Date 05 May 2020
Submission Date 13 May 2020
Open Date 14 May 2020
Finance
Tender Value Ref. Documents
Tender Fee 550
EMD 500
Exemption Not Available
Document List
0cad2c7a-9b49-4994-9854-c75a0bb9d090.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 05, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
May 13, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 14, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

0cad2c7a-9b49-4994-9854-c75a0bb9d090.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders