| 1 | 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting for all leads and lifts excetra complete.\nItem / Page No : 2 / 197\nSpecification No : Bd.A.1\nSpec. Page No : 259\n | | 61.777 | Cubic Metre |
|---|
| 2 | 2 | Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with crushed sand / grit, ramming, watering, excetra complete.\nItem / Page No : 40 / 201\nAdditional Specifications : The work shall be carried out as per instructions of Engineer in-charge. | | 24.045 | Cubic Metre |
|---|
| 3 | 3 | Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork,laying/pumping, compacting and curing excetra complete, with fully automatic micro processor based Programmable Logic Control with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer. - With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 1 / 226\nSpecification No : Bd.E.1\nSpec. Page No : 287-288\nAdditional Specifications : With additional specifications for controlled concrete. | | 7.421 | Cubic Metre |
|---|
| 4 | 4 | Providing and laying half round concrete pipes of Indian Standard Non Pressure class of 300 milimetre diameter in proper line, level and slope including necessary excavation, laying, fixing with collers in cement mortar and refilling the trench etc. complete.\nNon-Dsr Item\nAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | | 8 | Running Metre |
|---|
| 5 | 5 | Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailling out water, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (Wooden centering will not be allowed.)with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 10 / 227\nSpecification No : Bd.E.4, B-7\nSpec. Page No : 289-290, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | | 7.185 | Cubic Metre |
|---|
| 6 | 6 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 11 / 230\nSpecification No : Bd.F.3, B-7\nSpec. Page No : 298, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | | 17.495 | Cubic Metre |
|---|
| 7 | 7 | Providing and fixing in position thermo mechnically treated FE-500 bar reinforcements of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete.\nItem / Page No : 33 / 245\nSpecification No : Bd.F.17\nSpec. Page No : 306\n | | 0.732 | Metric Ton |
|---|
| 8 | 8 | Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks,laying / pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 70 / 236\nSpecification No : Bd.F.8, B-7\nSpec. Page No : 302-303, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | | 1.58 | Cubic Metre |
|---|
| 9 | 9 | Hire charges for JCB 8 to 10 MT at the site of work.\nNon-Dsr Item\nAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | | 1 | Day |
|---|
| 10 | 10 | Providing 300 mm dia NP 3 Class Pipe\nNon-Dsr Item\nAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | | 5 | Running Metre |
|---|
| 11 | 11 | Providing and fixing Road junction / Information sign board of size 0.90 metre X 0.60 m. prepared on 16 gauge mild steel sheet with angle iron frame of size 35x35x5 milimetre including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 milimetre of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 centimetre. with 4 numbers high strength galvanised iron bolts and nuts of size 10 milimetre diameter and 20 milimetre long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre X 60 centimetre X 75 centimetre size as directed by Engineer-in-charge excetra complete. Mild Steel Board with Engineering Grade.\nItem / Page No : 47 / 79\nSpecification No : MoRTH-801\nSpec. Page No : ---\nAdditional Specifications : The work shall be carried out as per instructions of Engineer in charge. | | 1 | Number |
|---|
| 12 | 12 | Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor.\nItem / Page No : 3 / 0\nAdditional Specifications : 1. Government of Maharashtra, Revenue and Forest Department Gazette Number 67 Dated 15-5-2015 and Government of Maharashtra Public Works Department State Schedule of Rates 2017-18 General Note Number 4.3. 2. Above / below percentage quoted by the contractor will not be applicable for this item. | | 24.05 | Cubic Metre |
|---|
| 13 | 13 | Surcharge on Royalty charges at the rate of two percent of Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor.\nItem / Page No : 14 / 0\nAdditional Specifications : 1. Letter from the Chief Engineer, Public Works Region, Nagpur; bearing number Ka.Raste-6/Darsuchi/7618/2019 dated 11/09/2019 and Corrigendum number 1 attached to the letter. 2. Above / below percentage quoted by the contractor will not be applicable for this item. | | 24.05 | Cubic Metre |
|---|
| 14 | 14 | Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.\nItem / Page No : 4 / 0\nAdditional Specifications : 1. The amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the Vigillence and Quality Control Office with the name of work mensioned on it. | | 1 | Lumpsum |
|---|
| 15 | 15 | Add 1 % for Insuracne\nNon-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | | 1 | Lumpsum |
|---|
| 16 | 16 | Add 12 % for GST\nNon-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | | 1 | Lumpsum |
|---|
