| 1 | 1 | Charges for releasing the Instrument Air Compressor motor -90 KW from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after over hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor and including coupling, alignment and coupling the motor with the compressor. (IAC-2A Sl.No-14409805,2B Sl.No:01234/280615). | item1 | 2 | Nos |
|---|
| 2 | 2 | Charges for complete overhauling of motor including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling. (bearings will be supplied by TANGEDCO) | item2 | 2 | Nos |
|---|
| 3 | 3 | Charges for metal filling, machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides, checking of bearing housings, providing sleeves in the end covers on DE & NDE sides in Instrument Air Compressor motor. (if necessary) | item3 | 4 | Nos |
|---|
| 4 | 4 | Charges for painting of IAC motor for 2 Nos.(2.35 Sq.m/motor) | item4 | 4.7 | SQM |
|---|
| 5 | 5 | Charges for releasing the Heater Drip Pump motor -75 KW from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after over hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor and including coupling, alignment and coupling the motor with the pump.(HDP -2A Sl.No-84561067/06,2B Sl.No: 87561067/02). | item5 | 2 | Nos |
|---|
| 6 | 6 | Charges for complete overhauling of motor including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling(bearings will be supplied by TANGEDCO) | item6 | 2 | Nos |
|---|
| 7 | 7 | Charges for metal filling, machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides, checking of bearing housings, providing sleeves in the end covers on DE & NDE sides in Heater Drip Pump motor.(if necessary) | item7 | 4 | Nos |
|---|
| 8 | 8 | Charges for painting of Heater Drip Pump motor for 2 Nos.(2.22 Sq.m/motor) | item8 | 4.44 | SQM |
|---|
| 9 | 9 | Charges for releasing the Air Washer Blower Fan Motor 55 KW from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after over hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor and including coupling, alignment and coupling the motor with the pump.(AWF-2A Sl No.2860897-1&AWF-2B Sl No.2860897-5). | item9 | 2 | Nos |
|---|
| 10 | 10 | Charges for complete overhauling of Air Washer Blower Fan Motor 55 KW including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling(bearings will be supplied by TANGEDCO) | item10 | 2 | Nos |
|---|
| 11 | 11 | Charges for metal filling, machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides, checking of bearing housings, providing sleeves in the end covers on DE & NDE sides of Air Washer Blower Fan Motor. (if necessary) | item11 | 4 | Nos |
|---|
| 12 | 12 | Charges for painting of Air Washer Blower Fan motor for 2 Nos. (1.805 Sq.m/motor) | item12 | 3.61 | SQM |
|---|
| 13 | 13 | Charges for releasing the TLOCBP /HCBP motor -39/37 KW from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after over hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor and including coupling, alignment and coupling the motor with the pump. (TLCBP 2A – ADP50714, 2B-ADP 50715,HCBP-2A Sl.No-ADP50563,2B- Sl.No:ADP41746) | item13 | 4 | Nos |
|---|
| 14 | 14 | Charges for complete overhauling of TLCBP/HCBP motor 39/37 KW including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling. (bearings will be supplied by TANGEDCO) | item14 | 4 | Nos |
|---|
| 15 | 15 | Charges for metal filling, machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides, checking of bearing housings, providing sleeves in the end covers on DE & NDE sides in TLCBP/HCBP motor.(if necessary) | item15 | 8 | Nos |
|---|
| 16 | 16 | Charges for painting of TLOCBP/HCBP motor for 4 Nos.(1.47 Sq.m/motor) | item16 | 5.88 | SQM |
|---|
| 17 | 17 | Charges for releasing the Air Washer Circulating Water Pump motor - 30 KW from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after over hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor and including coupling, alignment and coupling the motor with the pump.(AWCWP 2B : 2860879-9, 2C -Sl.No: 2860879-4) | item17 | 2 | Mtrs |
|---|
| 18 | 18 | Charges for complete overhauling of Air Washer Circulating Water Pump motor - 30 KW including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling.(bearings will be supplied by TANGEDCO) | item18 | 2 | Nos |
|---|
| 19 | 19 | Charges for metal filling, machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides, checking of bearing housings, providing sleeves in the end covers on DE & NDE sides in Air Washer Circulating Water Pump motor. (if necessary) | item19 | 4 | Nos |
|---|
| 20 | 20 | Charges for painting of for 2 Nos AWCWP motor (1.03 Sq.m/motor) | item20 | 2.06 | SQM |
|---|
| 21 | 21 | Material Charges for \nEnd Sleeves for DE/NDE covers for 90 KW Motor(if necessary) | item21 | 4 | Nos |
|---|
| 22 | 22 | Material Charges for\nEnd Sleeves for DE/NDE covers for 75 KW Motor(if necessary) | item22 | 4 | Nos |
|---|
| 23 | 23 | Material charges for \nEnd Sleeves for DE/NDE covers for 55 KW Motor(if necessary) | item23 | 4 | Nos |
|---|
| 24 | 24 | Material charges for \nEnd Sleeves for DE/NDE covers for 39/37 KW Motor(if necessary) | item24 | 8 | Nos |
|---|
| 25 | 25 | Material charges for \nEnd Sleeves for DE/NDE covers for 30 KW Motor(if necessary) | item25 | 4 | Nos |
|---|
| 26 | 26 | \nCharges for consumables such as Paint, Bolt & nut, Dungry cloth, acetone etc.(Lumsum) | item26 | 1 | Nos |
|---|
