| 1 | 1 | Taking down shutter of any description not exceeding 1.00 Sqm each complete all as specified and directed. | | 30 | Per Leaf |
|---|
| 2 | 2 | All as per serial Item No 1.00 here-in-above but exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, complete all as specified and directed. | | 40 | Per Leaf |
|---|
| 3 | 3 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. | | 35 | Each |
|---|
| 4 | 4 | All as per serial Item No 3.00here-in-above but exceeding 1.5 Square Metre and not exceeding 4 Square Metre each, complete all as specified and directed. | | 30 | Each |
|---|
| 5 | 5 | Taking down aluminium window frame with shutters (Without taking off shutters from frame) n exc 1.5 Sqm each, complete, all as specified and directed. | | 20 | Each |
|---|
| 6 | 6 | Taking down aluminium door frame with shutters (Without taking off shutters from frame) exc 1.5 Sqm n exc 4.00 sqm each complete all as specified and directed. | | 20 | Each |
|---|
| 7 | 7 | Demolition of brick work or stone/boulder masonary built in CM including all quoins, arches, pillars, etc but excluding ashlar, facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge | | 12 | Cum |
|---|
| 8 | 8 | Dismantling wrought iron or mild steel work of any dscription not otherwise provided for complete all as specified and directed. | | 1 | Qtl |
|---|
| 9 | 9 | M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete, all as specified and directed. | | 12 | Cum |
|---|
| 10 | 10 | M&L for PCC (1:2:4), type B1 using 20 mm graded crushed stone aggregate as in hold fast, bed plate etc including necessary form work complete, all as specified and directed. | | 2.5 | Cum |
|---|
| 11 | 11 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed . | | 15 | Sqm |
|---|
| 12 | 12 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed. | | 20 | Sqm |
|---|
| 13 | 13 | M&L for Mild Steel framed work for door chowkhats made out of angle iron including welding of hold fast and supply and fixing tie rod 10 mm dia round bars (01 Nos) welded at bottom and making holes for sliding/tower bolt into angle iron/brick work and make good disturbed surface in cement mortar (1:3) and provide adequate piece of conduit pipe 3 mm thick of suitable size welded with angle iron frame for holding sliding/bolt frame for holding sliding/tower bolt complete all as specified and directed. | | 120 | kg |
|---|
| 14 | 14 | S&F Framed work of mild steel as in grills, grating with guard bars etc ends of bars shouldered or riveted or forged into spike conforming to Fe-290-0 or Gde E-165 complete all as specified and as directed | | 80 | Kg |
|---|
| 15 | 15 | S&F Mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, hooks & pintle hinges and similar small articles conforming to Fe-290-0 or Gde E-165 complete all as specified and as directed . | | 80 | Kg |
|---|
| 16 | 16 | S&F Pressed steel frames for doors size of frame 125x60x1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed by Engineer-in-Charge | | 30 | RM |
|---|
| 17 | 17 | Supply & Fixing 2nd class hard wood plain, soild straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed . | | 2.5 | Cum |
|---|
| 18 | 18 | S&F for 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and directed. | | 120 | Sqm |
|---|
| 19 | 19 | S&F aluminium anodised powder coated frame for doors, windows, ventilators of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat, etc for fixing etc. complete all as specified & as directed. | | 249.5 | Kg |
|---|
| 20 | 20 | S&F aluminium anodised powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete, all as specified & directed. | | 55 | Sqm |
|---|
| 21 | 21 | S&F aluminium anodised powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.), complete, all as specified & directed. | | 50 | Sqm |
|---|
| 22 | 22 | S&F anodised aluminum Grill made of 5 mm dia aluminum bars, size of mesh 50 mm by 50 mm fixed together with aluminum frame of size 40mm by10mm by 1.9 mm thick for aluminum window, complete, all as specified and directed | | 50 | Sqm |
|---|
| 23 | 23 | S&F factory made plain framed, panelled shutters, 35 mm thick of second class hard wood (Hollock) (any numbers of panels) with panels of 12 mm thick veneered particle board exterior grade medium density with commercial veneering on both faces with sheesham wood beading all round the panel made out of 20 by 15 mm , on one side and fitted to chowkhats complete all as specified and directed. | | 15 | Sqm |
|---|
| 24 | 24 | S&F Glazed and skelton shutters, 35 mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), chemically treated, complete, all as specified and directed. | | 40 | Sqm |
|---|
| 25 | 25 | All as per serial item No 24.00 here-in-before but 30 mm thick as in window and ventilator etc are provided with stiles and rails, sash bar all as specified in SSR Part I, section 8, clause 8.24 (b), chemically treated, complete all as specified and directed by Engineer-in-Charge. | | 30 | Sqm |
|---|
| 26 | 26 | S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed. | | 50 | RM |
|---|
| 27 | 27 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete, all as specified & directed. | | 25 | Sqm |
|---|
| 28 | 28 | S & F steel ventilator with top hung shutter including hinges, steel peg stay complete with glazing bars complete all as specified and directed. | | 6 | Sqm |
|---|
| 29 | 29 | S&F 4mm thick tinted coloured glass, with oil putty in square in not exc 0.5 sq.m in each pane complete all as specified and as directed | | 30 | Sqm |
|---|
| 30 | 30 | S&F 5.5mm thick sheet glass, ordinary quality, glazing with oil putty or with wooden beads, area exceeding 0.50 Sqm but not exceeding 1.0 Sqm each pane with and including solar control film 50 micron reflective type (greater sun control or equivalent) complete all as specified and directed. | | 25 | Sqm |
|---|
| 31 | 31 | S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. | | 30 | sqm |
|---|
| 32 | 32 | Servicing and greasing of aluminium door including replacement nut , screws rubber gaskets, pivot, taper clip etc including taking down carefully of door shutter for replacing unserviceable parts/components by new parts /components for smooth functioning of door and refixing the same in existing opening/position, complete, all as specified and directed. | | 35 | Each Leaf |
|---|
| 33 | 33 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. | | 150 | sqm |
|---|
| 34 | 34 | M&L 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. | | 105 | Sqm |
|---|
| 35 | 35 | S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 100 mm complete all as specified and directed. | | 195 | Each |
|---|
| 36 | 36 | S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 75 mm complete all as specified and directed. | | 70 | Each |
|---|
| 37 | 37 | S&F 200 mm long mild steel barrel tower bolt, stove enameled black with bright bolt complete all as specified and directed. | | 40 | Each |
|---|
| 38 | 38 | All as per Ser Item No 37.00 but 150 mm long complete all as specified and directed. | | 70 | Each |
|---|
| 39 | 39 | S&F Mild steel pressed handle, oval type, stove enameled black, 150 mm size complete all as specified and as directed. | | 50 | Each |
|---|
| 40 | 40 | All as per Serial Item No 39.00 herein above but of 100 mm size complete all as specified and as directed. | | 40 | Each |
|---|
| 41 | 41 | S&F Mild steel sliding door bolt , plate type, stove enameled black, with bright bolt not less than 12 mm dia with & including 06 bolts and nuts , 04 on bolt side and 02 on staple side, length of bolt 250 mm complete all as specified and as directed. | | 40 | Each |
|---|
| 42 | 42 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and as directed. | | 30 | Each |
|---|
| 43 | 43 | S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed. | | 70 | Each |
|---|
| 44 | 44 | S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed. | | 60 | Each |
|---|
| 45 | 45 | S&F Mild steel 200 mm ordinary rat tail rod pattern springs including roller and roller plate complete fixed to wooden or steel frame all as specified and as directed. | | 25 | Each |
|---|
| 46 | 46 | S&F in repair Mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete and fixed to wooden or steel frame all as specified and as directed | | 12 | Each |
|---|
| 47 | 47 | S&F Floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring, fixed to shutters, complete all as specified and as directed. | | 25 | Each |
|---|
| 48 | 48 | S & F 0.71 mm thick plain aluminium sheeting alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut ) fitted in wall cladding, steel gates, etc., cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts as directed. | | 10 | Sqm |
|---|
| 49 | 49 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed includind taking down and refixing of shutter as in repairs complete all as specified and directed. | | 15 | Each |
|---|
| 50 | 50 | S&F aluminium body hydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete, all as specified and directed. | | 20 | Each |
|---|
| 51 | 51 | S&F in repair mild steel mortice lock 4 levers, vertical type, size 100mm complete, all as specified and directed. | | 15 | Each |
|---|
| 52 | 52 | M&L for preparation of new or untreated painted wood and wooden based surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete, all as specified and directed. | | 250 | Sqm |
|---|
| 53 | 53 | All as per Serial Item No 52.00 herein above but on new or previously untreated steel and iron surfaces over a coat of red oxide primer, complete, all as specified and directed . | | 150 | Sqm |
|---|
| 54 | 54 | M&L for three coat white wash on walls including preparation of new wall surfaces, complete, all as specified and directed . | | 20 | Sqm |
|---|
| 55 | 55 | M&L for two coats of oil bound distemper on newly plastered undecorated surface of walls including preparation and finishing surface with approved primer complete, all as specified and directed . | | 120 | Sqm |
|---|
| 56 | 56 | M&L for preparation of new wall surface & applying two coats of cement base paint over a coat of primer, complete, all as specified and directed . | | 40 | Sqm |
|---|
| 57 | 57 | Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. | | 227 | sqm |
|---|
| 58 | 58 | M&L for non skid Ceramic tiles coloured /printed 7 to 8 mm thick (square/rectangular) area of each the exceeding 0.06sqm but not exc 0.11 Sq m laid setting and jointed with cement slurry as in floors, over & including 15 mm thick bedding of layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed. | | 40 | Sqm |
|---|
| 59 | 59 | All as per above item No 58.00 here-in-before but vertical surfaces, skirting/dado and risers etc over & including 15mm thick rendering in CM (1:4) to receive wall finishes | | 4 | Sqm |
|---|
| 60 | 60 | M&L for glazed ceramic tiles (coloured) 300mm x 200mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:4) to receive wall finishes complete, all as specified and directed by Engineer-In-Charge. | | 50 | Sqm |
|---|
| 61 | 61 | M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified & directed. | | 40 | Sqm |
|---|
| 62 | 62 | All as per above item No 61.00 here-in-before but skirting/dado and risers etc over & including 15mm thick rendering in CM (1:4) to receive wall finishes | | 8 | Sqm |
|---|
| 63 | 63 | M&L for Vitrified Ceramic tiles, light shade, 10 mm thick (square or rectangular) polished, area of each tile n.exc 0.36 sqm setting and jointed with cement slurry laid as in floors over & including 15mm thick bedding of layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed. | | 70 | sqm |
|---|
| 64 | 64 | All as per above item No 63.00 here-in-before but skirting/dado and risers etc over & including 10mm thick rendering in CM (1:4)\nNote for item No 63.00 & 64.00 :--(i) Vitrified tiles for floor & wall shall be of best quality and colour/shade as approved by GE.\n(ii) The cost for cutting of tiles for making shape to tiles for different pattern/design of floor shall be deemed to be included in the unit rate of items. Nothing extra shall be entertained on this account. | | 15 | Sqm |
|---|
| 65 | 65 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete, all as specified and directed . | | 200 | Sqm |
|---|
| 66 | 66 | Provision of perforated/semi-perforated 9mm thick ceiling tiles of size 595mm x 595mm for insulation and acoustic purposes including aluminium anodised section of size, wall angle 30mm x 25mm x 2mm thick, main / cross tee-section 15mm x 15mm x 1.4mm and suspended with 4mm dia GI wire of suitable length and including fixed & aluminium snap grid all as per clause 10.38.1 of SSR Part-I and as per manufacturer’s instructions complete all as specified and as directed by Engineer-in-Charge.\nMake :-- Aluminium section : -- INDALCO/ HINDALCO/ JINDAL\n(ii) Perforated/Semi Perforated TILES :--- ARMSTRONG/ LAFARG. | | 200 | Sqm |
|---|
| 67 | 67 | M&L for 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in pelmet box, shelves, Kitchen cabinets etc as in repair complete all as specified & as directed. | | 20 | Sqm |
|---|
| 68 | 68 | Dismantling asbestos corrugated or semi corrugated sheets as in roof covering including ridge etc complete all as directed by Engr-in-charge. | | 210 | Sqm |
|---|
| 69 | 69 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed . | | 160 | Sqm |
|---|
| 70 | 70 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed . | | 50 | Sqm |
|---|
| 71 | 71 | S&F 1mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) with grade of zinc coating 275, fixed with self tapping screws complete all as specified & as directed. | | 70 | Sqm |
|---|
| 72 | 72 | Dismantling timber scantlings 40 Sqcm and over in section, in any position unframed work complete, all as specified and directed . | | 8 | Cum |
|---|
| 73 | 73 | M&L for 2nd class hardwood clean sawn as in scantling fixed to timber frame etc complete, all as specified and directed . | | 3 | Cum |
|---|
| 74 | 74 | All as per Serial Item No 73.00 herein above but except timber scantling complete, all as specified and directed . | | 5 | Cum |
|---|
| 75 | 75 | M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote, complete, all as specified and directed . | | 80 | sqm |
|---|
| 76 | 76 | S&F in repairs mild steel decorative and colour coated curtain rail, 20mm bore complete all as specified & directed. | | 75 | RM |
|---|
| 77 | 77 | S&F Brackets decorative and colour coated suitable for 20mm bore complete all as specified & directed. | | 50 | per leaf |
|---|
| 78 | 78 | S&F in repairs tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed. \nMake: Cera Cat No. F5001103 or Equivalent make of Kohler/Jaquar/Blue Star & Silver Shine/ Prayag\n | | 25 | Each |
|---|
| 79 | 79 | Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) set in cement mortar, of 100 mm internal dia complete all as specified and as directed by Engineer-in-charge. | | 120 | RM |
|---|
| 80 | 80 | S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts and similar small articles conforming to Grade E-165 (Fe 290) including and fixed in position complete all as specified and as directed by Engineer-in-charge. | | 110 | Kg |
|---|
| 81 | 81 | Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. | | 120 | RM |
|---|
| 82 | 82 | S&F for 110mm bore PVC(SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge. | | 30 | Each |
|---|
| 83 | 83 | M&L for using glass fiber base bitumen felt, grade 2 over the galvalume sheet complete all as specified and as directed. | | 90 | Sqm |
|---|
