| 1 | 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001113 | 189 | Each |
|---|
| 2 | 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 Sqm each complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001114 | 120 | Each |
|---|
| 3 | 3 | Taking down shutters of any description not exc 1.00 sqm each complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001115 | 70 | Each |
|---|
| 4 | 4 | Taking down shutters of any description exc 1.00 sqm but n. exc. 2 Sqm each complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001116 | 200 | Each |
|---|
| 5 | 5 | M&L for 2nd class hard wood, plain, solid, straight chowkhats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001117 | 0.25 | Cubic Metre |
|---|
| 6 | 6 | Cutting holes through brick wall built in cement mortar, for inserting holdfasts, depth of embedded portion of holdfasts exceeding half brick thick but not exceeding one brick thick and making good the dismantled portion with PCC type B-0, (1:2:4) and cement mortar (1:3) to match the disturbed surface with existing finish, complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001118 | 210 | Each |
|---|
| 7 | 7 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube in opening complete all as specified & directed by Engr-in-Charge. | BI01010001010000000000000515BI0100001119 | 120 | Running Metre |
|---|
| 8 | 8 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified & directed by Engr-in-Charge. | BI01010001010000000000000515BI0100001120 | 30 | Square Metre |
|---|
| 9 | 9 | S&F pressed steel frame for doors with double rebates of size 125 x 60mm made with steel sheet of 1.25mm thickness in and including necessary fixing lugs, hinges lock strike plate complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001121 | 104 | Running Metre |
|---|
| 10 | 10 | S&F pressed steel frame for doors with single rebates of size 105 x 60mm made with steel sheet of 1.25mm thickness in and including necessary fixing lugs, hinges lock strike plate complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001122 | 77 | Running Metre |
|---|
| 11 | 11 | M&L for providing cement concrete type C0 (1:3:6) 12.50mm graded aggregate as in pressed steel door frame (backfill) complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001123 | 1 | Cubic Metre |
|---|
| 12 | 12 | S&F for 35 mm thick 2nd class hard wood plain, framed paneled shutters (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutters) complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001124 | 138 | Square Metre |
|---|
| 13 | 13 | S&F for 35 mm thick 2nd class hard wood plain, framed flush shutters, solid core construction with block boards core and plywood face panels, commercial type on both sides complete all as specified and directed. | BI01010001010000000000000515BI0100001125 | 150 | Square Metre |
|---|
| 14 | 14 | M&L for factory made 2nd class hardwood (Hollock) glazed & skeleton shutters, 35mm thick open rebated and prepared to receive wire cloth, glass, gauze etc. with sash Bars, divided of framing plain chamfered or rounded, fitted with cut and metred beads off securing glass, gauze etc ( not more than 350mm center to center ) sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified. NOTE : Wire gauge shutter should also have the provision of vertical member of size 100mm 35mm at middle of the shutter. The vertical member have mitred joints and shall be stuck tenoned to the depth not less than 35mm in top, lock & bottom rails and have rebate to receive the wire gauge etc. complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001126 | 151 | Square Metre |
|---|
| 15 | 15 | M&L for 2nd class hard wood, plain, fillets sectional area exc 13sq cm but not exc 25sq cm, square rectangular or triangular in section, clean sawn, securred with nails or brads fixed with screws, complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001127 | 150 | Running Metre |
|---|
| 16 | 16 | Factory made box type steel window composite type with double rebated pressed steel frames 80 mm x 60mm (Peripherral) and 80x75mm (Intermediate members) made out of cold rolled 1.25mm thick sheet having steel window/vertilators shutter of MS tubular section of size 50mm x 20mm x 1.10mm thick fixed with box type hinges including 10mm x 10mm x 1.10mm MS hollow tubular section as beading for glazed and wire shutter handle of 100mm size made out of Z section 01 No, MS stove enamelled black tower bolt of size 120mm 02 Nos, 150 mm mild steel hooks and eyes each sutter flat iron 40mm x 1.25mm and 200mm long hold fasts 04 Nos each window including necessary filling hollow frame with PCC (1:3:6), cutting holes in wall, making good with existing surfaces as per specifications and including 10mm x 10mm mild steel square bars as grill @10mm c/c fixed to window/ventilator frame using welding complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001128 | 279.5 | Square Metre |
|---|
| 17 | 17 | S&F framed work such as supports of gates and cooler stand and similar work for window etc conforming to 290. Gde F-165 complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001129 | 200 | Kilogram |
|---|
| 18 | 18 | S&F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers, kitchen cabinet holdfasts and similar small articles conforming to Fe290 or Fe 165 complete all as specified and directed. | BI01010001010000000000000515BI0100001130 | 300 | Kilogram |
|---|
| 19 | 19 | S&F in repairs 18/19 mm thick pre laminated particle board exterior grade prelaminated both sides with decorativce choice laminations and other side balancing white lamination, fixed with screws to timber frame as in cupboards, shutters, shelves, cabinets, pelmets etc including fixing 18 mm wide 6 mm thick beading all around of 1st class HW (Teak) complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001131 | 350 | Square Metre |
|---|
| 20 | 20 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap when open 30mm fixed in repair complete all as specified and directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001132 | 230 | Running Metre |
|---|
| 21 | 21 | S&F for MS butt hinges medium weight cold rolled mild steel and fixed, size of hinges is 100 mm complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001133 | 375 | Each |
|---|
| 22 | 22 | S&F to Aluminium, anodized, barrel tower bolts of extruded section. Length of bolt is 150mm complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001134 | 100 | Each |
|---|
| 23 | 23 | S&F to mild steel, barrel tower bolts of extruded section. Length of bolt is 200mm complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001135 | 425 | Each |
|---|
| 24 | 24 | S&F 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed | BI01010001010000000000000515BI0100001136 | 240 | Each |
|---|
| 25 | 25 | S&F 125 mm long extruded aluminium alloy, handles, fabricated type, anodized, complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001137 | 200 | Each |
|---|
| 26 | 26 | S&F 150 mm long mild steel pressed, handles, fabricated type, complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001138 | 610 | Each |
|---|
| 27 | 27 | M&L for welding in repairs exc 2.5 cm but n. exc. 5 cm in length, thickness of metal to be welded exc 6 mm but n. exc. 9mm complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001139 | 20 | Each |
|---|
| 28 | 28 | S&F 150 mm size hasp and staple safety type aluminium anodized complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001140 | 25 | Each |
|---|
| 29 | 29 | S&F in repair, 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001141 | 25 | Each |
|---|
| 30 | 30 | S&F magnetic catcher for kitchen cabinet and cupboards complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001142 | 300 | Each |
|---|
| 31 | 31 | Hacking out old broken glass (any thickness) from wooden/steel frames, glazed with putty of fixed with screws complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001143 | 15 | Square Metre |
|---|
| 32 | 32 | S&F sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.5 Sqm in each pane of thickness 4.0 mm complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001144 | 105 | Square Metre |
|---|
| 33 | 33 | S&F sheet glass ordinary quality and glazing with oil putty in squares exc. 0.5 Sqm in each pane of thickness 4 mm complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001145 | 20 | Square Metre |
|---|
| 34 | 34 | S&F Figured glass, pinhead type and glazing with oil putty in square exc. 0.5 Sqm in each pane of thickness 3.0 mm complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001146 | 5 | Square Metre |
|---|
| 35 | 35 | S&F Galvanized stainless steel cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001147 | 160 | Square Metre |
|---|
| 36 | 36 | S&F Galvanized stainless steel cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples, fixed in repairs, complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001148 | 25 | Square Metre |
|---|
| 37 | 37 | M&L for applying 2 coats of synthetic enamel paint over steel and iron surfaces of any description, over 10 cm in width or girth including preparation of new or previously treated surface over a coat of red oxide oxide primer complete all as specified and directed by Engr-in-Charge. | BI01010001010000000000000515BI0100001149 | 500 | Square Metre |
|---|
| 38 | 38 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001150 | 850 | Square Metre |
|---|
| 39 | 39 | S&F 300 mm mild steel ordinary rat tail rod pattern springs, including roller & roller plate complete all as specified directed by Engr-in-charge. | BI01010001010000000000000515BI0100001151 | 170 | Each |
|---|
| 40 | 40 | S&F Floor door stopper of Aluminium alloy body anodised with hard drawn steel spring 140mm size fixed in floor complete all as specified directed by Engr-in-charge. | BI01010001010000000000000515BI0100001152 | 200 | Square Metre |
|---|
| 41 | 41 | Taking down cement plaster on brick or stone wallsetc including raking out joint, hacking for key, scrubbing down ith water etc complete all as specified and directed. | BI01010001010000000000000515BI0100001153 | 80 | Square Metre |
|---|
| 42 | 42 | M&L for rendering 15 mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001154 | 50 | Square Metre |
|---|
| 43 | 43 | M&L for prepartaion of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001155 | 30 | Square Metre |
|---|
| 44 | 44 | M&L for prepartaion of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified & directed by Engr-in-charge. | BI01010001010000000000000515BI0100001156 | 50 | Square Metre |
|---|
| 45 | 45 | S & F mortice lock, vertical type size 100 mm brass 6 lever in repair complete all as specified and directed by Engr-in-charge. | BI01010001010000000000000515BI0100001157 | 15 | Each |
|---|
| 46 | 46 | S&F 25mm dia, .5mm thick, MS drapery rod with PVC coating, fixed in repair, complete all as specified and directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001158 | 380 | Running Metre |
|---|
| 47 | 47 | S&F Brackets suitable for for 25mm dia, .5mm thick, MS drapery rod, fixed in repair, including fixing with rawl plugs, complete all as specified and directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001159 | 200 | Each |
|---|
| 48 | 48 | S&F PVC colour coated finel, holder, endo brackets suitable for 25mm dia, .5mm thick, MS drapery rod with PVC coating complete all as specified and directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001160 | 200 | Each |
|---|
| 49 | 49 | Demolition of cement concrete in ground floor sand paving not exceeding 15cm thickness (below or above ground level) and removing the same and deposited complete all as specified and as directed by Engineer in charge | BI01010001010000000000000515BI0100001161 | 2.35 | Square Metre |
|---|
| 50 | 50 | M&L for 25mm thick PCC type B1 (1:2:4) using 12.50mmgraded stone aggregate as in sub base floor complete all as specified and directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001162 | 50 | Square Metre |
|---|
| 51 | 51 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but ot backing) and removing the same and deposited complete all as specified and as directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001163 | 100 | Square Metre |
|---|
| 52 | 52 | M&L for 10 mm thick cement plaster on wall surfaces as in cement mortar 1:4, finished fair and for laying of wall tiles complete all as specified and directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001164 | 75 | Square Metre |
|---|
| 53 | 53 | M&L for 15 mm thick cement screed bed for laying floor as in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001165 | 75 | Square Metre |
|---|
| 54 | 54 | M&L for First Quality, Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in floors, in neat cement slurry and pointed in white cement to match tiles complete complete all as specified and directed by Engr-in-charge. | BI01010001010000000000000515BI0100001166 | 75 | Square Metre |
|---|
| 55 | 55 | M&L for First Quality, Glazed ceramic coloured tiles 7mm thick (rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm, as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles complete all as specified and directed by Engr-in-charge. | BI01010001010000000000000515BI0100001167 | 75 | Square Metre |
|---|
| 56 | 56 | S&F aluminium powder coated door seal strip with glass woolve fixed with steel screws at bottom rail of external doors complete all as specified and directed. | BI01010001010000000000000515BI0100001168 | 250 | Running Metre |
|---|
