Extension And Renovation Of Conference Room And Other Renovation Work In Control Building At Wrpl Abu Road
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 May 2020
0 days left
EMD
22500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Abu road → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Extension And Renovation Of Conference Room And Other Renovation Work In Control Building At Wrpl Abu Road
BOQ
| Name of Work: Extension & Renovation of Conference Room and other renovation work in control building at WRPL Abu Road. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 10 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of the Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations.] In cement mortar | BI01010001010000000000000515BI0100001125 | 11.78 | CUM |
| 2 | 20 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of the Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations.] Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | BI01010001010000000000000515BI0100001126 | 3.85 | CUM |
| 3 | 30 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of the Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge.] | BI01010001010000000000000515BI0100001127 | 1 | CUM |
| 4 | 40 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001128 | 275.63 | SQM |
| 5 | 50 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3.0 sq. metres and below | BI01010001010000000000000515BI0100001129 | 12 | EA |
| 6 | 60 | Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by the Engineer-in-Charge. | BI01010001010000000000000515BI0100001130 | 45.38 | SQM |
| 7 | 70 | Dismantling tile work in floors and roofs, walls laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm | BI01010001010000000000000515BI0100001131 | 110 | SQM |
| 8 | 80 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for all leads including all lifts involved. | BI01010001010000000000000515BI0100001132 | 25 | CUM |
| 9 | 90 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil. | BI01010001010000000000000515BI0100001133 | 8.06 | CUM |
| 10 | 100 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001134 | 15.44 | CUM |
| 11 | 110 | 12 mm cement plaster of mix : 1:4 (1 cement : 4 fine sand) on walls, flooring or underside of ceiling and other concrete surfaces including scaffolding, finishing smooth, curing all complete as per specifications and directions of the Engineer-in-Charge. \nNote : Rates for external plaster are for height up to 10m from ground level unless & otherwise stated. | BI01010001010000000000000515BI0100001135 | 367.54 | SQM |
| 12 | 120 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001136 | 577.56 | SQM |
| 13 | 130 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification : Two or more coats on new work | BI01010001010000000000000515BI0100001137 | 577.56 | SQM |
| 14 | 140 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : One or more coats on old work | BI01010001010000000000000515BI0100001138 | 194.4 | SQM |
| 15 | 150 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001139 | 2.81 | CUM |
| 16 | 160 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001140 | 1.91 | CUM |
| 17 | 170 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001141 | 172.26 | KG |
| 18 | 180 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001142 | 7.48 | SQM |
| 19 | 190 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. : Granite of any colour and shade : Area of slab over 0.50 sqm | BI01010001010000000000000515BI0100001143 | 30.03 | SQM |
| 20 | 200 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001144 | 110 | SQM |
| 21 | 210 | Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001145 | 2.12 | SQM |
| 22 | 220 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams/sq.m. including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross 'T' of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be interlocked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls/ partitions on a Perimeter wall angle pre-coated steel of size 24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85x30x0.8 mm, spaced at 1200 mm centre to centre along main 'T', bottom exposed with 24 mm of all 'T' sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by the Engineer-in-Charge. [Note: Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non-combustible as per B.S. 476 (Part-IV), 100% humidity resistance and also having thermal conductivity < 0.043 w/mK.] | BI01010001010000000000000515BI0100001146 | 196.2 | SQM |
| 23 | 230 | Providing wood work in frames of false ceiling, partitions, wooden paneling etc. sawn and fixed in position : Sal wood | BI01010001010000000000000515BI0100001147 | 0.6 | CUM |
| 24 | 240 | Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden/ steel frame work, complete as per direction of Engineer-in-Charge (Frame work shall be paid for separately). 12 mm thick commercial ply conforming to IS:1659 BWP type | BI01010001010000000000000515BI0100001148 | 166.65 | SQM |
| 25 | 250 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type-S, including cost of adhesive of approved quality. 1.0 mm thick | BI01010001010000000000000515BI0100001149 | 166.65 | SQM |
| 26 | 260 | Providing and fixing Pre-laminated medium density fibre board IS 14587:1998 marked, with one side decorative lamination and other side balancing lamination Grade-I (exterior grade), in shelves & Table with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand. | |||
| 27 | 270 | 18 mm thick | BI01010001010000000000000515BI0100001151 | 36.96 | SQM |
| 28 | 280 | 25 mm thick | BI01010001010000000000000515BI0100001152 | 11.88 | SQM |
| 29 | 290 | Providing and fixing in position for crockery case made of internal framework, shelves, drawers, layon slides partitions and shutters with 19 mm thick pre-laminated block board of BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) including piano type hinges (19x25 mm), best quality teak wood lipping around the shutter edges, magnetic ball catchers, brass tower bolt, knobs,handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent), spirit polishing/ enamel painting on lipping in required shade matching to the laminate etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only). | BI01010001010000000000000515BI0100001153 | 2.5 | SQM |
| 30 | 300 | Providing and fixing in position built-up cupboard, shutters with 19 mm thick pre-laminated block board of BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3 mm thick teak wood lipping at all edges of the board with polish/ enamel paint fixed with water resistant adhesive on inside and external face as per approved shade including piano type hinges 19x25mm, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent) and frame size 50x35 mm in 2nd class teak wood as per drawing complete including spirit polishing/ enamel painted on frame & lipping in required shade matching to the laminate, fixing of frame to wall with hold fasts, 1:2:4 RCC etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only): For kitchen under slab cabinets. | BI01010001010000000000000515BI0100001154 | 1.5 | SQM |
| 31 | 310 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of the Engineer-In-Charge. \nFor shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required. \nAnodised Aluminium (Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of Grade AC-15)\n | BI01010001010000000000000515BI0100001155 | 421.2 | KG |
| 32 | 320 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-In-Charge. With float glass panes of 5.50 mm thickness (Cost of aluminium snap beading shall be paid in basic item) : | BI01010001010000000000000515BI0100001156 | 30.89 | SQM |
| 33 | 330 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length : Sal wood | BI01010001010000000000000515BI0100001157 | 0.25 | CUM |
| 34 | 340 | Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | BI01010001010000000000000515BI0100001158 | 5.54 | SQM |
| 35 | 350 | Point wiring\nSupplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installation of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC copper wire from D.B. to switchboard as required is also in the scope of the contractor. | |||
| 36 | 360 | 1 light point controlled by 1 switch. | BI01010001010000000000000515BI0100001161 | 40 | EA |
| 37 | 370 | 2 light points controlled by 1 switch | BI01010001010000000000000515BI0100001162 | 5 | EA |
| 38 | 380 | Wiring with PVC insulated 2.5 sqmm copper conductor wire for fan points (1 fan point controlled by 1 modular switch) including providing space for electronic regulator in switch box , providing and fixing fan hook in the ceiling as per specifications and drawings. | BI01010001010000000000000515BI0100001163 | 5 | EA |
| 39 | 390 | Wiring with PVC insulated 2.5 sqmm copper conductor wire for phase & neutral , 650 V grade including earthing , the third pin with 1.5 sqmm copper conductor earthing insulated continuity wire for exhaust/ wall bracket fan/Switch board including providing and fixing of 5 pin 6 A modular socket and 10 A modular switch near the door or as as per specifications and drawings. \n | BI01010001010000000000000515BI0100001164 | 20 | EA |
| 40 | 400 | Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 2.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 6 pin 16A modular socket and 20 A modular switch (1 plug point per circuit) as per specifications and drawings | BI01010001010000000000000515BI0100001165 | 10 | EA |
| 41 | 410 | Point wiring for power plug point with 4 sq.mm stranded PVC insulated copper wire including earthing the third pin with 2.5 sq. mm copper insulated earthing wire complete with supply and fixing of recessed mounted industrial type 3 pin 32 A metal clad socket and plug, 20A MCB (Motor duty) housed in a 16 gauge M.S. Box\n | BI01010001010000000000000515BI0100001166 | 10 | EA |
| 42 | 420 | Wiring as for call bell points (1 call bell point controlled by 1 modular switch)in switch box including providing call bell / buzzer suiable for single phase 230 V as per specifications and drawings.\n | BI01010001010000000000000515BI0100001167 | 2 | EA |
| 43 | 430 | Ceiling fan with electronic regulator & other accessories and fittings etc. of or approved make as per appendix -1 with the following sweep size:-\n 56\" Sweep | BI01010001010000000000000515BI0100001168 | 5 | EA |
| 44 | 440 | 12\" Oscillating wall mounted bracket fan, noiseless, plastic moulded construction, rotary device for 3 step speed control integrated unit of approved make with all accessories complete in all respect. | BI01010001010000000000000515BI0100001169 | 8 | EA |
| 45 | 450 | Exhaust fan 12\" Sweep\nSupply, installation, testing of single phase 230 V, industrial type heavy duty exhaust fan of GEC/Usha/Crompton Greaves or of approved make as per appendix -1 fitted/ provided with louvres, supports etc. including making the required opening on walls, fixing and connecting the wires etc. including earthing the body of the fan, making good the opening on the wall etc. complete as per specifications, drawings and direction of Site Engineer including the cost of all labour, tools, materials etc. complete. | BI01010001010000000000000515BI0100001170 | 1 | EA |
| 46 | 460 | Supply, Installation, testing and commissioing of 600mm X 600mm square, back-lit, LED light panel, 36W complete fitting/fixture with polycarbonate diffuser & integrated electronic driver of Havells, Philips, Jaguar or other approve make as per EIC | BI01010001010000000000000515BI0100001171 | 20 | EA |
| 47 | 470 | Supply, installation, testing & commissioning of 20-22W LED batten tub light Surface and wall mounted complete fitting/fixture with polycarbonate diffuser & integrated electronic driver of Havells, Philips, Jaguar or other approve make. | BI01010001010000000000000515BI0100001172 | 20 | EA |
| 48 | 480 | Supply, installation, testing and commissioning of LED SURFACE MOUNT DOWNLIGHTE-9 W complete fitting/fixture with polycarbonate diffuser & integrated electronic driver of Havells, Philips, Jaguar or other approve make as per EIC | BI01010001010000000000000515BI0100001173 | 20 | EA |
| 49 | 490 | Supply, installation, testing & commissioning of 9-10 W LED bulb with holder of Havells, Philips, Jaguar or other approve make. | BI01010001010000000000000515BI0100001174 | 20 | EA |
| 50 | 500 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of the Engineer-In-Charge. Concealed Work (including cutting chases and making good the wall etc.) | |||
| 51 | 510 | 15 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001177 | 10 | M |
| 52 | 520 | 25 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001178 | 10 | M |
| 53 | 530 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore | BI01010001010000000000000515BI0100001179 | 2 | EA |
| 54 | 540 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 : 15 mm nominal bore | BI01010001010000000000000515BI0100001180 | 2 | EA |
| 55 | 550 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x 250 mm | BI01010001010000000000000515BI0100001181 | 1 | EA |
| 56 | 560 | Providing and fixing C.P. Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of the Engineer-in-Charge. | BI01010001010000000000000515BI0100001182 | 1 | EA |
| 57 | 570 | Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125mm C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floors, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. | BI01010001010000000000000515BI0100001183 | 1 | EA |
| 58 | 580 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | BI01010001010000000000000515BI0100001184 | 5 | M |
| 59 | 590 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply & Drainage including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of the Engineer-In-Charge. | |||
| 60 | 600 | 50 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001186 | 5 | M |
| 61 | 610 | 100 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001187 | 10 | M |
AI Tender Summary
Tender Timeline
May 06, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMay 19, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 20, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender