Manning And Operation Of Water Supply Installation At Joshimath Under Ge 871 Ews, JOSHIMATH-Uttarakhand

Manning And Operation Of Water Supply Installation At Joshimath Under Ge 871 Ews , notes for item sl nos: 1 to 3 ( a ) maintinance of rectification of faults / complaints and replacement of fittings/fixtures and maintaining complaint cell with and including maintenance of necessary records like compliant register , compliant slips , store issue register , iv/rv register , gate pass book , demolition register , scrap register etc complete resposibility of contractor and complete installation with equipments in serviceable condition will be handed over to the contractor for the manning and operation . the as below conditions shall be followed by the contractor while operating the water supply and pump house installations . ( b ) the rate quoted is deemed to be inclusive of the cost of complaint slips , registers and cost of t &p for maint work , area of cleaning and maintenance of pump houses , sub stations , tank and including earth pits and pruning of tree branches and minor consumables such as clips , nut and bolts etc for day to day maintenance . ( c ) the rate quoted is deemed to be inclusive of providing mobile communication system in the complaint cell so that the complaint can be lodged and feed back can be obtained . ( d ) stores/fitting/fixtures shall be issued by the department for replacing unserviceable fittings/fixures viz gi pipes/fittings , gland packing , greese , oil , gate valves chlorination chemical etc where required at no extra cost to the department . to the extent available in the stores . ( e ) the contractor has to supply uniform to their employees for wearing during the working hours . the unit rate is deemed to include for the uniform . the uniform shall be in blue colour pant and shirt . the pattern of the uniform shall be as decided by the engineer-in-charge . ( f ) technician/employees employed by the contractor will not work contineously for 07 days . the employees worked for six days contineously should be given one day off with payment as per the contract labour act as referred in condition 58 of iafw-2249 . ( g ) the contractor is responsible for maintenance of compliant cell the compliants to the individuals under consultation with concerned je e/m . ( h ) the contractor is responsible for submitting the doccuments of qualification/experience certificates of technicians to be employed before comencement of work . ( j ) the operator should be iti qualified from any recognised institute and between 18 yrs to 60yrs of age and shall be responsible for the operation ( k ) operating the control valve of main supply from the receiving source in collection chamber and cleaning the chamber at time to time as directed by engr-in-charge/je e/m and removal the deposite meterial away from the site incl operation of alum dozer . ( l ) checking and watching for leakage break down of receiving pipe from main source/supply/distribution pipe line complete inside the water point complex and inform immediate to engr-in-charge . ( m ) no shift duty person will leave the duty place without releiver . if any person found absent form duty place while checking by the je concerned or any higher authority at any time , absent will be marked in attendance register and penalty should be recovered from the payment as specified . ( n ) the contractor will be responsible for any damage to the installation/plant due to the mishandling of the equipment , he will make good the same at his own risk and cost . decision regarding responsibility of the fault/damage will be decided by ge , his decision will be final and binding . ( o ) the contractor supply and maintain the log book for pump sets/record of water supply system , attendance register , chlorination record register , in take chamber cleaning/wash out record , sedimentation cleaning record filter bed back wash record , pure water tank wash record , break down record register and maintenance register of water source . the cost of stationery shall be quoted while quoting the rates . ( p ) the contractor will ensure general cleanliness of the complete installation , their equipments and installation compound and its surrounding area etc as directed by engr-in-charge . , manning and operation for water supply installation at joshimath area including sunday & holiday by deploying the below mentioned manpower as per the timing given :- ( a ) shift timings are as under :- ( i ) 1st shift : 0500 hrs to 1300 hrs ( ii ) 2nd shift : 1300 hrs to 2100 hrs ( b ) man power to be employed ( by out sourcing ) :- ( i ) valve man - 01 nos , skilled ( 01 no for ist shift . ) ( ii ) mate valve man - 01 nos , semi skilled ( 01 no for 2nd shift . ) , manning and operation of water point/installation at 25 mfvh under ge 871 ews including sunday/holiday by deploying the below mentioned manpower as per timing given :- ( a ) shift timings are as under :- ( i ) 1st shift : 0500 hrs to 1300 hrs ( ii ) 2nd shift : 1300 hrs to 2100 hrs ( b ) man power to be employed ( by out sourcing ) :- ( i ) mate valve man - 02 nos , semi skilled ( 01 no in 1st shift and 01 no in 2nd shift . ) , manning and operation ( by out sourcing man power ) of water supply distribution system in general day shift of 0800 hours continueous duration including sunday and holiday by employing the manpower as mentioned below for entire maintenance of water supply system comprising of gi/ms/pvc/pp-r water supply pipe lines , pump sets , sluice valves , nrvs , gate valves , air vent valves and connected fittings and fixtures by deploying the below mentioned man power as per the timing given :- ( a ) shift timings are as under :- ( i ) general day shift : 0930 hrs to 1800 hrs , with lunch break from 1330 to 1400 hrs . ( b ) man power to be employed ( by out sourcing ) :- ( i ) mate fgm/valve man , semi skilled - 03 nos in general shift . , supply and fix in replacement of gi nipple 15 mm dia 100 mm long suitable for medium grade gi pipe , isi marked . , supply and fix in replacement of gi nipple 20 mm dia 100 mm long suitable for medium grade gi pipe , isi marked . , supply and fix in replacement of gi nipple 25 mm dia 100 mm long suitable for medium grade gi pipe , isi marked . , supply and fix in replacement of gi nipple 40 mm dia 100 mm long , suitable for medium grade gi pipe isi marked , supply and fix in replacement of gi nipple 50 mm dia 100 mm long , suitable for medium grade gi pipe isi marked , supply and fix in replacement of gi nipple 80 mm dia 100 mm long , suitable for medium grade gi pipe isi marked , supply and fix in replacement of gi nipple 100 mm dia 100 mm long , suitable for medium grade gi pipe isi marked , supply and fix in replacement of gi reducer socket 20 mm / 15 mm dia suitable for gi pipe medium grade isi marked . , supply and fix in replacement of gi reducer socket 25 mm / 15 mm dia suitable for gi pipe medium grade isi marked . , supply and fix in replacement of gi reducer socket 25 mm / 20 mm dia suitable for gi pipe medium grade isi marked . , supply and fix in replacement of gi reducer socket 40 mm / 25 mm dia suitable for gi pipe medium grade isi marked . , supply and fix in replacement of gi elbow 15 mm dia suitable for gi pipe medium grade isi marked . , supply and

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	12-May-2020	BOQCOR/E8	BOQ	21-05-2020
2	21-May-2020	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	28-05-2020

INR 500 /-

INR 36000.0 /-

INR 18 Lakhs /-

NAME OF WORK: MANNING AND OPERATION OF WATER SUPPLY INSTALLATION AT JOSHIMATH UNDER GE 871 EWS.
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Notes for Item Sl Nos: 1 to 3 (a) Maintinance of rectification of faults / complaints and replacement of fittings/fixtures and maintaining complaint cell with and including maintenance of necessary records like compliant Register, Compliant Slips, Store Issue Register, IV/RV Register, Gate Pass Book, Demolition Register, Scrap Register etc complete resposibility of contractor and complete installation with equipments in serviceable condition will be handed over to the contractor for the manning and operation. The as below conditions shall be followed by the contractor while operating the water supply and pump house installations. (b) The rate quoted is deemed to be inclusive of the cost of complaint slips, registers and cost of T &P for maint work, area of cleaning and maintenance of pump houses, sub stations, tank and including earth pits and pruning of tree branches and minor consumables such as clips, nut and bolts etc for day to day maintenance. (c) The rate quoted is deemed to be inclusive of providing mobile communication system in the complaint cell so that the complaint can be lodged and feed back can be obtained. (d) Stores/fitting/fixtures shall be issued by the Department for replacing unserviceable fittings/fixures viz GI pipes/fittings, gland packing, greese, oil, gate valves chlorination chemical etc where required at no extra cost to the Department. to the extent available in the stores. (e) The contractor has to supply uniform to their employees for wearing during the working hours. The unit rate is deemed to include for the uniform. The uniform shall be in blue colour pant and shirt. The pattern of the uniform shall be as decided by the Engineer-in-Charge. (f) Technician/employees employed by the contractor will not work contineously for 07 days. The employees worked for six days contineously should be given one day off with payment as per the contract labour act as referred in condition 58 of IAFW-2249. (g) The Contractor is responsible for maintenance of Compliant cell the compliants to the individuals under consultation with concerned JE E/M. (h) The contractor is responsible for submitting the doccuments of qualification/experience certificates of technicians to be employed before comencement of work. (j)The operator should be ITI qualified from any recognised institute and between 18 yrs to 60yrs of age and shall be responsible for the operation (k) Operating the control valve of main supply from the receiving source in collection chamber and cleaning the chamber at time to time as directed by Engr-in-charge/JE E/M and removal the deposite meterial away from the site incl operation of Alum dozer. (l)Checking and watching for leakage break down of receiving pipe from main source/supply/distribution pipe line complete inside the water point complex and inform immediate to Engr-in-charge. (m)No shift duty person will leave the duty place without releiver. If any person found absent form duty place while checking by the JE concerned or any higher authority at any time, absent will be marked in attendance register and penalty should be recovered from the payment as specified. (n)The contractor will be responsible for any damage to the installation/plant due to the mishandling of the equipment, he will make good the same at his own risk and cost. Decision regarding responsibility of the fault/damage will be decided by GE, his decision will be final and binding. (o) The contractor supply and maintain the log book for pump sets/record of water supply system, attendance register, chlorination record register, in take chamber cleaning/wash out record, sedimentation cleaning record filter bed back wash record, pure water tank wash record, break down record register and maintenance register of water source. The cost of stationery shall be quoted while quoting the rates. (p)The contractor will ensure general cleanliness of the complete installation , their equipments and installation compound and its surrounding area etc as directed by Engr-in-Charge.	BI01010001010000000000000515BI0100001115	1	zero
2	2	Manning and operation for water supply installation at Joshimath Area including Sunday & Holiday by deploying the below mentioned manpower as per the timing given :- \n(a) Shift timings are as under :- \n(i) 1st Shift : 0500 hrs to 1300 hrs \n(ii) 2nd Shift : 1300 hrs to 2100 hrs \n(b) Man Power to be employed (By out sourcing):-\n(i) Valve Man - 01 Nos, Skilled (01 No for Ist shift.) \n(ii) Mate valve Man - 01 Nos, Semi Skilled ( 01 No for 2nd shift.)	BI01010001010000000000000515BI0100001116	11	Per month
3	3	Manning and Operation of water point/installation at 25 MFVH under GE 871 EWS including Sunday/Holiday by deploying the below mentioned manpower as per timing given :- \n(a) Shift Timings are as under :- \n(i) 1st Shift : 0500 hrs to 1300 hrs \n(ii) 2nd Shift : 1300 hrs to 2100 hrs \n(b) Man Power to be employed (By out sourcing):- \n(i) Mate valve Man - 02 Nos, Semi Skilled (01 No in 1st shift and 01 No in 2nd shift.) \n	BI01010001010000000000000515BI0100001117	11	Per month
4	4	Manning and operation (By out sourcing man power) of water supply distribution system in general day shift of 0800 hours continueous duration including sunday and holiday by employing the manpower as mentioned below for entire maintenance of water supply system comprising of GI/MS/PVC/PP-R water supply pipe lines, pump sets, sluice valves, NRV's, gate valves, air vent valves and connected fittings and fixtures by deploying the below mentioned man power as per the timing given :- \n (a) Shift Timings are as under :- \n(i) General day shift : 0930 hrs to 1800 hrs, with lunch break from 1330 to 1400 Hrs. \n(b) Man power to be employed (By out sourcing):- \n(i) Mate FGM/Valve Man, Semi Skilled - 03 Nos in general shift.\n	BI01010001010000000000000515BI0100001118	11	Per month
5	5	Supply and fix in replacement of GI nipple 15 mm dia 100 mm long suitable for medium grade GI pipe, ISI marked.	BI01010001010000000000000515BI0100001119	20	Each
6	6	Supply and fix in replacement of GI nipple 20 mm dia 100 mm long suitable for medium grade GI pipe, ISI marked.	BI01010001010000000000000515BI0100001120	25	Each
7	7	Supply and fix in replacement of GI nipple 25 mm dia 100 mm long suitable for medium grade GI pipe, ISI marked.	BI01010001010000000000000515BI0100001123	20	Each
8	8	Supply and fix in replacement of GI nipple 40 mm dia 100 mm long, suitable for medium grade GI pipe ISI marked	BI01010001010000000000000515BI0100001124	16	Each
9	9	Supply and fix in replacement of GI nipple 50 mm dia 100 mm long, suitable for medium grade GI pipe ISI marked	BI01010001010000000000000515BI0100001125	12	Each
10	10	Supply and fix in replacement of GI nipple 80 mm dia 100 mm long, suitable for medium grade GI pipe ISI marked	BI01010001010000000000000515BI0100001126	5	Each
11	11	Supply and fix in replacement of GI nipple 100 mm dia 100 mm long, suitable for medium grade GI pipe ISI marked	BI01010001010000000000000515BI0100001127	5	Each
12	12	Supply and fix in replacement of GI reducer socket 20 mm / 15 mm dia suitable for GI Pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001128	15	Each
13	13	Supply and fix in replacement of GI reducer socket 25 mm / 15 mm dia suitable for GI Pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001129	10	Each
14	14	Supply and fix in replacement of GI reducer socket 25 mm / 20 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001130	5	Each
15	15	Supply and fix in replacement of GI reducer socket 40 mm / 25 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001132	3	Each
16	16	Supply and fix in replacement of GI elbow 15 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001133	60	Each
17	17	Supply and fix in replacement of GI elbow 20 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001135	30	Each
18	18	Supply and fix in replacement of GI elbow 25 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001136	25	Each
19	19	Supply and fix in replacement of GI elbow 40 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001137	10	Each
20	20	Supply and fix in replacement of GI elbow 50 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001138	5	Each
21	21	Supply and fix in replacement of GI elbow 80 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001139	5	Each
22	22	Supply and fix in replacement GI union 15 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001141	20	Each
23	23	Supply and fix in replacement of GI union 20 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001142	20	Each
24	24	Supply and fix in replacement of GI union 25 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001143	20	Each
25	25	Supply and fix in replacement of GI union 40 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001144	15	Each
26	26	Supply and fix in replacement of GI union 50 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001145	15	Each
27	27	Supply and fix in replacement of GI union 80 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001147	4	Each
28	28	Supply and fix in replacement of GI union 100 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001148	4	Each
29	29	Supply and fix in replacement of GI tee all equal of size 15 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001149	10	Each
30	30	Supply and fix in replacement of GI tee all equal of size 20 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001150	10	Each
31	31	Supply and fix in replacement GI tee all equal of size 25 mm dia suitable for GI Pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001151	10	Each
32	32	Supply and fix in replacement of GI tee all equal of size 40 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001152	5	Each
33	33	Supply and fix in replacement of GI socket 15 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001154	40	Each
34	34	Supply and fix in replacement of GI socket 20 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001155	25	Each
35	35	Supply and fix in replacement of GI socket 25 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001156	20	Each
36	36	Supply and fix in replacement GI socket 40 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001158	15	Each
37	37	Supply and fix in replacement of GI socket 50 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001159	20	Each
38	38	Supply and fix in replacement of GI socket 80 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001160	5	Each
39	39	Supply and fix in replacement of GI socket 100 mm dia suitable for GI pipe medium grade ISI marked.	BI01010001010000000000000515BI0100001161	10	Each
40	40	Supply and fix in replacement of ball valves 25 mm dia high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe.	BI01010001010000000000000515BI0100001162	10	Each
41	41	Supply and fix in replacement of ball valves 20 mm dia high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe.	BI01010001010000000000000515BI0100001163	20	Each
42	42	Supply and fix in replacement of ball valves 15 mm dia high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe.	BI01010001010000000000000515BI0100001164	25	Each
43	43	Supply and fix in replacement of 15 mm dia gun metal gate valve iron wheel head screwed both ends of size suitable for 15 mm dia GI pipe.	BI01010001010000000000000515BI0100001166	15	Each
44	44	Supply and fix in replacement of 20 mm dia gun metal gate valve iron wheel head screwed both ends of size suitable for 20 mm dia GI pipe.	BI01010001010000000000000515BI0100001167	15	Each
45	45	Supply and fix in replacement of 25 mm dia gun metal gate valve iron wheel head screwed both ends of size suitable for 25 mm dia GI pipe.	BI01010001010000000000000515BI0100001168	12	Each
46	46	Supply and fix in replacement of 40 mm dia gun metal gate valve iron wheel head screwed both ends of size suitable for 40 mm dia GI pipe.	BI01010001010000000000000515BI0100001169	5	Each
47	47	Supply and fix in replacement of 50 mm dia gun metal gate valve iron wheel head screwed both ends of size suitable for 50 mm dia GI pipe.	BI01010001010000000000000515BI0100001170	8	Each
48	48	Supply only calcium Hypochlorite with chlorine content of minimum 65% to 70%, moistrure and others percentage by Mass 5 to 10%, stability loss maximum 10%, Mesh passing through - 100 BSS should be max 1.5% with grannuals and quantity shall be 190 to 250 grams per one lakh ltrs of water to achieve one PPM at injection point available in 45 kg containers/drums of calcium based grannuals, ISI marked all as specified and directed.\nMake:- Sree Rayalaseema Hi Strength Hypo Ltd. Brand Name :PURI CHLOR/AQUAFIT (Chemical Division) or its equivalent make as approved by GE.	BI01010001010000000000000515BI0100001172	405	Kg
49	49	Supply only crystal alum suitable for potable water.	BI01010001010000000000000515BI0100001173	90	Kg
50	50	Supply only bleaching powder ISI marked grade-I in polythene bag of 25 Kg each all as specified and directed. \n\n	BI01010001010000000000000515BI0100001174	400	Kg