Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #24227921

Piped Water Supply Scheme At Chikli Construction Of Pwss At Village Chikli District Ujjain Based On Tubewell Including Construction Of 150 Kl Rcc Oht 12 Mtr Staging Const Of 30 Kl Sumpwell Laying And Jointing Of Pipe Line And Maintenance Of 24 Month

Issued by Government Departments · Badnagar, Madhya Pradesh
Tender Value
99.32 Lakhs
Estimated cost
Bid Submission
29 Jun 2020
0 days left
EMD
99329
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Badnagar → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Piped Water Supply Scheme At Chikli Construction Of Pwss At Village Chikli District Ujjain Based On Tubewell Including Construction Of 150 Kl Rcc Oht 12 Mtr Staging Const Of 30 Kl Sumpwell Laying And Jointing Of Pipe Line And Maintenance Of 24 Month

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 11-May-2020 Corrigendum 01 Date 29-May-2020
2 28-May-2020 Corrigendum 02 Date 29-Jun-2020

BOQ

Name of Work: Survey, Investigation, Design and Construction of Piped Water Supply Scheme at Village - CHIKLI Block BADNAGAR Distt. Ujjain based on Tube wells including installation of electric submersible/centrifugal water motor pump, construction of 150 KL R.C.C. OHT 12 Mtr. staging, construction of 30 KL R.C.C Sump well, laying and jointing of rising main and distribution pipe line system, household tap connections, construction of pump house, Site Development around OHT and electric power connections at Tube wells and sump well including cost of all material and labour with 30 Days Trial Run/Commissioning period and 24 Months Operation and Maintenance of entire scheme
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11.01Earth work in Excavation for pipe trench in all kinds of soil and WBM in areas including dressing, watering and ramming and disposal of Excavated earth lead upto 50 meters and lift upto 1.5m, disposal earth to be leveled, neatly dressed. USOR. Item.no. 16.4 -P.no.2071688.15Cum
21.02Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. Soft rock with or without blasting or bituminous pavement / cement concrete road. USOR. Item.no.16.6(a)-P.no.207385Cum
31.03Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) USOR.Item.no. 9.1 -P.no.122\n90 mm dia HDPE 6 Kg/cm²4200Mtr
41.04Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) USOR.Item.no. 9.1 -P.no.122\n110 mm dia HDPE 6 Kg/cm²1000Mtr
51.05Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) USOR.Item.no. 9.1 -P.no.122\n160 mm dia HDPE 6 Kg/cm²200Mtr
61.06Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) USOR.Item.no. 9.1 -P.no.122\n110 mm dia HDPE 10 Kg/cm²1000Mtr
71.07Installation of HDPE pipe by Horizontal Direction Drilling Method including preparing and setting up the plant and equipment, making string of new pipe material, installing new pipe string and making the system ready for commissioning by HDD operation including drilling, stringing, reaming and pulling back the new pipe on the designed bore path alignment, proper disposal of drilling fluid, as per code of practice for horizontal direction drilling technique suiting indian conditions. Required pipes/ specials and other civil work shall be paid separately-in all types of soils. (This item shall be executed only after prior permission of Superintending Engineer)\n USOR. Item.no. 16.3 -P.no.207\nHDPE pipe of any class-90 mm outer dia500Mtr.
81.08Installation of HDPE pipe by Horizontal Direction Drilling Method including preparing and setting up the plant and equipment, making string of new pipe material, installing new pipe string and making the system ready for commissioning by HDD operation including drilling, stringing, reaming and pulling back the new pipe on the designed bore path alignment, proper disposal of drilling fluid, as per code of practice for horizontal direction drilling technique suiting indian conditions. Required pipes/ specials and other civil work shall be paid separately-in all types of soils. (This item shall be executed only after prior permission of Superintending Engineer)\n USOR. Item.no. 16.3 -P.no.207\nHDPE pipe of any class-110mm outer dia400Mtr.
91.09Providing and laying HDPE Bend 90º confirming to IS specifications. USOR.Item.no.9.2 -P.no.122 \n90 mm dia HDPE 6 Kg/cm²9Each
101.1Providing and laying HDPE Bend 90º confirming to IS specifications. USOR.Item.no.9.2 -P.no.122 \n110 mm dia HDPE 6 Kg/cm²2Each
111.11Providing and laying HDPE Bend 90º confirming to IS specifications. USOR.Item.no.9.2 -P.no.122 \n110 mm dia HDPE 10 Kg/cm²6Each
121.12Providing and laying HDPE Bend 45º confirming to IS specifications. USOR.Item.no.9.2 -P.no.123\n90 mm dia HDPE 6 Kg/cm²16Each
131.13Providing and laying HDPE Bend 45º confirming to IS specifications. USOR.Item.no.9.2 -P.no.123\n110 mm dia HDPE 6 Kg/cm²/4Each
141.14Providing and laying HDPE Bend 45º confirming to IS specifications. USOR.Item.no.9.2 -P.no.123\n110 mm dia HDPE 10 Kg/cm²6Each
151.15Providing and laying Equal HDPE Tee confirming to IS specification USOR.Item.no.9.4 -P.no.123\n90 mm dia HDPE 6 Kg/cm²14Each
161.16Providing and laying Equal HDPE Tee confirming to IS specification USOR.Item.no.9.4 -P.no.123\n110 mm dia HDPE 6 Kg/cm²3Each
171.17Providing and laying Equal HDPE Tee confirming to IS specification USOR.Item.no.9.4 -P.no.123\n110 mm dia HDPE 10 Kg/cm²2Each
181.18Providing and laying HDPE Reducer: confirming to IS specifications.USOR.Item.no. 9.6 -P.no.124\n110 - 90 mm 6 Kg/sq cm.7Each
191.19Providing and laying HDPE End Cap confirming to IS specifications. USOR Item.no. 9.8 -P.no.124\n90 mm - 6 Kg /cm²22Each
201.2Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Couple USOR Item.no. 9.14.1 P.no.129 \n90 mm USOR Item.no. 9.14.1.8 P.no.1295Each
211.21Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Couple USOR Item.no. 9.14.1 P.no.129 \n110 mm USOR Item.no. 9.14.1.9 P.no.12910Each
221.22Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Equal Tee USOR Item.no. 9.14.2 P.no.130 \n90 mm USOR Item.no. 9.14.2.8 P.no.13010Each
231.23Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Equal Tee USOR Item.no. 9.14.2 P.no.130 \n110 mm USOR Item.no. 9.14.2.9 P.no.13010Each
241.24Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Elbow 900 USOR Item.no. 9.14.3 P.no.130 \n90 mm USOR Item.no. 9.14.2.8 P.no.13010Each
251.25Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Elbow 900 USOR Item.no. 9.14.3 P.no.130 \n110 mm USOR Item.no. 9.14.2.9 P.no.13010Each
261.26Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.USOR Item.no. 9.14 -P.no.124\nElectro Fusion Reducer USOR Item.no. 9.14.4 P.no.131 \n110 X 90 mm USOR Item.no. 9.14.4.13 P.no.13110Each
271.27Spigot Long Neck Pipe End (Stub End) for Electro Fusion Joint USOR Item.no. 9.14.6 P.no.132 \n90 mm USOR Item.no. 9.14.6.3 P.no.13210Each
281.28Spigot Long Neck Pipe End (Stub End) for Electro Fusion Joint USOR Item.no. 9.14.6 P.no.132 \n110 mm USOR Item.no. 9.14.6.4 P.no.1325Each
291.29Providing & fixing of following Ductile iron\ndouble flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete CLASS PN- 10 USOR Item.no. 4.41 P.no.71,\n100 mm6Each
301.3Providing & fixing of following Ductile iron\ndouble flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete CLASS PN- 10 USOR Item.no. 4.41 P.no.71,\n80 mm6Each
311.31Providing & fixing following cast iron double flanged single door reflux (non return) valves including jointing & testing with cost of jointing material such as bolts,nuts and rubber insertion all complete as per IS :5312 (Part I) CLASS PN- USOR. Item.no.8.4a -P.no 113\n100 mm dia4Each
321.32Providing & fixing following cast iron single air valves, small orifice with screwed end as per IS: 14845-2000 including jointing & testing with cost of jointing material and rubber insertion all complete as per IS :13095-1991 CLASS PN- 1.0, 25 mm dia USOR. Item.no.8.8 -P.no 1142Each
331.33Filling available excavated earth in trenches, lead up to 50m and lift upto 1.5 m in all kind of soil excluding watering and ramming. USOR. Item.no. 16.10b -P.no 2081898.84Cum
341.34Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make.USOR.Item.no. 24.20.107(11)-P.no 267\n4 Sq mm700mtr
351.35Labour only for lowering of three phase submersible pumping set in the tube well with pipe line assembly, electrical cable, testing etc. complete including connecting the electrical cable from pump & starter .USOR. Item.no.24.13.4.ii -P.no 258\nAbove 7.5 HP to 12.5 HP - Depth up to 150 mtr.//3Job
361.36Providing laying and jointing of following galvanised Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes,specials and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part-II USOR. Item.no.6.1-P.no. 86\n50 mm dia M Class462R Mtr
371.37Providing laying and jointing of following galvanised Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes,specials and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part-II USOR. Item.no.6.1-P.no. 86\n80 mm dia M Class18R Mtr
381.38Providing and laying mechanically mixed cement concrete with crushed stone aggregate excluding centering and shuttering (with 20 mm nominal sizegraded stone aggregate) M-15 USOR. Item.no.16.23a.ii.-P.no. 21075.8cum
391.39Providing and laying mechanically mixed cement concrete with crushed stone aggregate excluding centering and shuttering (with 20 mm nominal sizegraded stone aggregate) M-10 USOR. Item.no.16.23a.ii.-P.no. 21082.36cum
401.4Providing and placing in position cold twisted steel and hot rolled deformed steel reinforcement for R.C.C. work i/c cutting, bending, binding etc. complete i/c cost of binding wire and wastage. USOR.Item.no.16.25a.-P.no. 211525Kg
411.41Steel work in welded built-up section/ framed work, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers treads landings etc. of stair cases including use of chequered plate wherever required all complete USOR. Item.no.16.25d(i).-P.no. 21230kg
421.42Supplying & Installation of Energy efficiant five star BEE rating ISI Marked required capacity of Three Phase, 50 Hz, 415V, deep well submersible pump Steel body, suitable for 6\"tube well with Control Panel Starter suitable for Submersible pump with dry run protection, single phase preventer, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe and connection cable.. 10 H.P. with 20 stages, Head Mt. 184-80 Discharge\nLPM 60-270 USOR. Item.no.24.20.106(ix)- P.no. 2683No
431.43Supplying & Installation of Five star BEE rating ISI Marked required capacity of Three phase, 50 Hz, 415V, Open well Submersible pump, with Control Panel Starter with Dry Run Protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable. USOR. Item.no.24.20.113(i)-P.no. 268\n3.0 H.P. Head Mt.15-24, Discharge LPM 615-1952No
441.44Providing and installation of automatic water level indicator for supervisory control cum auto on/off panel of motor pump assembly, using GSM module based water level controller and accessories for small water supply scheme, having source more than 500 mtr but within 10 Kms as per approved specification and as directed by Engineer in charge.USOR. Item.no.17.12.-P.no. 2263Each
451.45Construction of Brick masonary valve chamber with 20 cm thick wall in 1:6 C.M. with 12mm thick 1:4 Cement Plaster and base course 10 cm. thick in M-15. Inside Dimensions 110x80x100cm M-20 RCC chamber cover size 130x100cmx120cm including cost of materials, labour etc. complete.USOR. Item.no.17.12.-P.no. 22617No
461.46Supply & erection of readymade mini pump house (control panel box) GI sheet of 18 gauge of size 90cmx90cmx60cm with 40x40x5mm angle Iron frame to fix it 200mm below ground level with hold fasts grouted in foundation and 300mm above ground level for clearance suitable for fixing of control panel, fuse unit, main switch etc. as per approved specification.USOR. Item.no.17.18.-P.no. 2283Each
471.47Provision for Jointing of TW to Rising Main with cost of Material/ specials such as GI Union / CI Flange, GI Reducer UPVC MTA FTA etc. as per requiement of site i/c cost of labour etc. complete as per approved specification and as directed by Engineer in charge.USOR. Item.no.17.19.-P.no. 2283Job
481.48Provision for jointing of Rising main to supmp well/OHT and OHT to Distribution pipe line with cost of material/specials such as Bends, MTA as per rerquirement of site i/c cost of labour with excavation, labour as per requirement complete as per approved\nspecification and as directed by Engineer in charge. USOR. Item.no.17.20.-P.no. 2293Job
491.49Household connection with MDPE pipe :- Providing and supply of Electro Fusion Tapping Ferrule (Branch Tapping saddle) Female BSP Threaded woth SS 304 insert fittings in accordance with BS EN 12201: Part-3 suitable for drinking water with in black/ blue color manufactured from compounded PE 80/ PE-100 virgin polymer and compatible with PE80/PE 100 pipes, in pressure rating SDR 11 with min PN 12.5 rated for water application with elecctro fusion tapping ferrule saddle, 90x15mm and providing and supplying blue 20mm dia PN-16 MDPE pipes 5-10 mtr confirming to IS 4427:1996 Manufactured from virgin resin PE 80 food grade compounded Raw Material having Blue color only with quality assurance certificate from quality agencies like WRC/ CIPET (India) / DVGM/ KIWA/ SPGN etc. for usage in drinking water system the cost shall include testing of all materials all taxes central, state municipal inspection charges transportation up to site, transit insurance, loading, unloading, stacking etc. complete i/c cost of 15mm dia UPVC pipe sockety Elbow, Union 20x15 mm dia PVC reducer and providing and stainless steel water tap with grouting of vertical pipe as per requirement as per approved specification and as directed by Engineer in charge. USOR. Item.no.17.13.-P.no. 226715No
501.5Providing and Installation of automatic water level controller (Auto switch off) with accessories i/c labour and material etc. complete, as per approved specification and directed by Engineer in charge USOR. Item.no.17.21.-P.no. 229(if applicable)3No
511.51\"Design, construction, testing and commissioning of RCC over head tank of 150 KL capacity over 12.m staging at CHIKLI village Ujjain district of Madhya Pradesh including providing and fixing of double flanged C.I. pipes for inlet, outlet, Scour and overflow delivering up to 2.50 meters away from R.C.C. outer columns of reservoir, C.I. double flanged heavy duty specials and duck foot bends conforming to Is 1538:1993 and C.I. double flanged I.S.I. marked sluice valves (Class –II) etc. and providing and fixing of all accessories such as lightening conductor, water level indicator, R.C.C. stairs from ground level to tank floor level, steel ladders from balcony to roof and Aluminium ladder from roof to inside floor level of tank, ventilating cowls, manhole covers with frame and G.I. pipe railing with RCC post for stairs and balcony tank floor level all complete as per detailed specifications complete (turnkey job)\nThe payment of this item shall be made according to the payment schedule given in SCC.1Job
521.52Design, construction, testing and commissioning of underground RCC sumpwell of 30 KL with Brick masonary pump house over this sumpwell (Specifications of Sumpwell and pump house are mentioned in Annexure-E) The payment of this item shall be made according to the payment schedule given in SCC.1Job
531.53Providing and fixing Argentum Oligodynamic based water purifier including all accesories\ncapacity 25000 lph or suitable capacity for the system i/c maintenace of electrode (as per\nspecification )1Each
541.5411 KV line on 140 kg. 8.0 Mtrs. long PCC Poles with rabbit conductor average span of 70 mtr. in rural area. (Schedule Ref. C-1.2 of MPMKVVCL for SOR)0.9Km
551.5511 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for tapping DP. (Schedule Ref. C-5.2 of MPMKVVCL for SOR)3Each
561.5611 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for straight line. (Schedule Ref. C-5.1 of MPMKVVCL for SOR)2Each
571.57L.T. Line 1 phase 3 wire on PCC support using Aerail Bunched XLPE cable with maximum span of 50 Meter. (Schedule Ref. D-3.2 of MPMKVVCL for SOR)\n2 x 35+ 1 x 16 sq. mm (Insulated nuetral massenger)0.85Km
581.5811/0.4 KV out-door type transformer sub-station. (Schedule Ref. E-1.2 of MPMKVVCL for SOR)\n25 KVA on 140 kg. 8.0 meter long PCC Pole2Each
591.59Construction of RCC Framed brick masonry 1.75 m. high boundry wall based on open foundation (As per estimate)57mtr.
601.6Providing MS gate with column of size 3.0 X1.5m.(USOR PWD PIU )as Per Drawing1no
611.61Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of\nsides and ramming of bottom disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) - All kinds of soil. MPPWD SOR Item 2.6 page 22 \n26.4Cum
621.62Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. - Ordinary rock MPPWD SOR Item 2.7.1 page 22 \n6.6Cum
631.63Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage etc. complete.Thermo-Mechanically Treated bars.(TMT) MPPWD SOR Item 5.16.6 page 68802.39Kg
641.64Reinforced cement concrete work (with 20mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and up to floor two level excluding cost of centering, shuttering, finishing and reinforcement : M 20 -Grade Concrete MPPWD SOR Item 5.2.1 page 6511.195Cum
651.65Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters butteresses, plinth beams and string courses etc.up to plinth level. MPPWD SOR Item 5.9 page 6644.8Sqm
661.66Lintels, beams, girders, bressumers and cantilevers. - Coping sides MPPWD SOR Item 5.9.5 page 6610.6Sqm
671.67Foundations, footings, bases of columns, etc. for concrete up to plinth level. MPPWD SOR Item 5.9.1 page 66\n31.6Sqm
681.68Columns, Pillars, Piers, Abutments, Posts and Struts. MPPWD SOR Item 5.9.6 page 6624.84Sqm
691.69Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :With 20mm nominal size graded stone aggregate.Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10)\nMPPWD SOR Item 4.1.1.4 page 45\n2.2Cum
701.7Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters,columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. up to floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate.M 20 - Grade concrete - Coping MPPWD SOR Item 4.2.1.2 page 451.06Cum
711.71Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorpt ion not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete.Cement Mortar 1:6 (1 cement : 6 sand) MPPWD SOR Item 6.6.2 page 8514.31Cum
721.7212 mm cement plaster of mix :1:6 (1 cement : 6 sand) MPPWD SOR Item 13.1.2 page 244210.9Sqm
731.73Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). MPPWD SOR Item 13.55.1 page 250215.1Sqm
741.74Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. MPPWD SOR Item 2.25 page 26\n24.446Cum
751.75Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete. MPPWD SOR Item 10.2 page 178\n150Kg
761.76Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. MPPWD SOR Item 13.69.1 page 252\n\n4.5Sqm
771.77Supply of Woltman Turbine Bulk meter class b, multijet, magnetically coupled as per specifications conforming to IS 770/1994, ISO 4064/1 and EEC approved, including transportation to site, storage, safety, installation, testing commissioning, making connection with existing pipeline having total measuring capacity of 10,000 Kilolitre with least cound of one Kilolitre including excavation at site, dewetering and reinstating the same after completion and as per specifications including all taxes.1Nos
781.78Providing and laying 60mm thick factory made cc interlocking paver block of M30 grade made by block making machine with strong vibratory compaction, of approved size design and shape laid in required colour and pattern over and including 50 mm thick compacted bed of stone dust , filling the joint with sand etc all complete as per the directio of engineer incharge MP PWD SOR No. 11.75 pno. 210225sqm
791.79Quarterly amount for Operation & Maintenance of Water Supply Scheme after successful trial-run and commissioning of entire scheme.\n(Annual increase/decrease in O&M will be applicable as per details given in SCC and note given below the BOQ)8Nos

AI Tender Summary

OUR REF NO 24227921
AUTHORITY Government Departments
TENDER VALUE 99.32 Lakhs
LAST DATE 29-06-2020
Authority
Authority Name Public Health Engineering Department
Work Description Piped Water Supply Scheme At Chikli Construction Of Pwss At Village Chikli District Ujjain Based On Tubewell Including Construction Of 150 Kl Rcc Oht 12 Mtr Staging Const Of 30 Kl Sumpwell Laying And Jointing Of Pipe Line And Maintenance Of 24 Month
Basic Detail
Tender No NIT No. 03/PHED/2020-21/Chikli Block Badnagar
Bidding Type Tender
Location
City Badnagar
State Madhya Pradesh
Key Dates
Publish Date 28 May 2020
Submission Date 29 Jun 2020
Open Date 30 Jun 2020
Finance
Tender Value 99.32 Lakhs
Tender Fee 10000
EMD 99329
Exemption Not Available
Document List
NitChikli.pdf
715AC4DA-F14A-424F-85CC-22D69295CB15.html
InstructionsToBidderForOnlineBidSubmission.pdf
BOQ_102683.xls
Tendernotice_1.pdf
TenderAcceptanceLetter.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 28, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
May 29, 2020
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 29, 2020
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 29, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 30, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

NitChikli.pdf

html

715AC4DA-F14A-424F-85CC-22D69295CB15.html

pdf

InstructionsToBidderForOnlineBidSubmission.pdf

xls

BOQ_102683.xls

pdf

Tendernotice_1.pdf

pdf

TenderAcceptanceLetter.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender