Public Works Department-PWD has published Providing And Fitting Fixing Of Electrical Appliances Spare Parts For Panel Board Of Different Dws Schemes Under Manu Rd Block Area Under Dws Sub Division Manu Dhalai Tripura. Submission Date for this Tender is 19-05-2020. Distribution Board Tenders in Dhalai District Tripura. Bidders can get complete Tender details and download the document.
Name of Work: Water supply arrangement of RWS Schemes under DWS Division, Ambassa during the year 2020-21/SH: Mtc of existing SBDTW Schemes at different location under Manu RD Block under DWS Sub-Division Manu, Dhalai Tripura | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Washing and re-development of old serviceable deep tube well by using air compressor, and testing of the well as per specification ( IS : 11189 ) and direction of the Engineer - in - charge.\nUpto 200 mtr pipe assembly | BI01010001010000000000000515BI0100001112 | ||
2 | 1.01 | A. with contractor's air compressor\nUsing air compressor of 300 - 450 cfm output for SBDTW | BI01010001010000000000000515BI0100001113 | 3 | Nos |
3 | 2 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral link (TPN) 415/500 volt, L&T/Havells/BCH make etc complete as per specification and direction of the Engineer-in-charge\ni) 32 Amps | BI01010001010000000000000515BI0100001114 | 20 | Nos |
4 | 3 | Supplying & fitting fixing of panel box of MS sheet with locking arrangement comprise with starter, main Switch, busber volt Meter selector switch etc. inside the box in/c. service connection within 50.00mt. length from LT line with roof for rain water protection and 4(four) nos. stand by c.c works in all respect as per direction of the Engineer in charge | BI01010001010000000000000515BI0100001115 | 5 | Job |
5 | 4 | Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm (slop-1 in 200) including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge\nA) In all kinds of soil\ni) For pipes not exceeding 90 mm dia | BI01010001010000000000000515BI0100001116 | 2500 | Mtr |
6 | 5 | Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. A Class - 3 ( working pressure 6.0 kg / cm2) | BI01010001010000000000000515BI0100001117 | ||
7 | 5.01 | i)40mm OD | BI01010001010000000000000515BI0100001118 | 700 | Mtr |
8 | 5.02 | ii)50mm OD | BI01010001010000000000000515BI0100001119 | 1800 | Mtr |
9 | 6 | Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. | |||
10 | 6.01 | i) 50 x 40 mm dia | 5 | Nos | |
11 | 6.02 | 40x15 mm dia | 10 | Nos | |
12 | 7 | Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer - in - charge | |||
13 | 7.01 | i) 40 mm dia | 8 | Nos | |
14 | 7.02 | ii) 15 mm dia | 10 | Nos | |
15 | 8 | Providing and fixing G.I. union as per CPWD specification and direction of the Engineer - in - charge | |||
16 | 8.01 | i. 40 mm dia | 5 | Nos | |
17 | 8.02 | ii) 15 mm dia | 8 | Nos | |
18 | 8.03 | iii) 50 mm dia | 5 | Nos | |
19 | 9 | Providing and fitting fixing PVC / plastic bib cock conforming to IS : 9763 in hydrant points at different location as per specification & direction of the Engineer-in-charge. | |||
20 | 9.01 | i. 15 mm dia | 20 | Nos | |
21 | 10 | Providing and fixing brass ferrule with C.I. cover conforming to IS : 2692 including boring and tapping the main as per of CPWD specification and direction of the Engineer - in - charge. | |||
22 | 10.01 | i) 10mm nominal bore | 10 | Nos | |
23 | 10.02 | ii) 15 mm dia | 10 | Nos | |
24 | 11 | Providing, fixing and laying fabricated UPVC equal Tees conforming to IS:10124 (Part-5) with solvent cement conforming to IS:14182 including testing of joints complete as per CPWD specification and direction of the Engineer-in-charge | |||
25 | 11.01 | i. 40x40 mm dia | 5 | Nos | |
26 | 11.02 | ii. 50x50x50 mm dia | 5 | Nos | |
27 | 12 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. \nA. External work - | |||
28 | 12.01 | i. 40 mm dia. nominal bore | 100 | Mtr | |
29 | 13 | Providing and fitting fixing of different capacity 230 volt, 1ph water fill submersible pumpset complete (ex/c. column pipe) DUKE/KSB make as per specification and direction of the Engineer-in-charg | |||
30 | 13.01 | i) 2 HP | 6 | Nos | |
31 | 14 | Providing and fitting fixing of single phase motor starter suitable for 2000 GPH capacity submersible pump of L&T makle 2.00 HP,1.5 KW,Relay range=11-18,Mv-2p cat no CS90319KOCOetc complete as per direction of the Engineer-in-charge | 20 | Nos | |
32 | 15 | Labour charges for lifting of submerssible pump motor set of depth 70' to 100' column pipe complete as per direction of the Engineer-in-charge. | 20 | Job | |
33 | 16 | Labour charges for lifting of submerssible pump motor set of depth 70' to 100' column pipe complete as per direction of the Engineer-in-charge. | 20 | Job | |
34 | 17 | Repair and maintenance of submessible Motor suitable for submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. | |||
35 | 17.01 | 1.00 Hp | 1 | Nos | |
36 | 17.02 | 2 Hp | 10 | Nos | |
37 | 18 | Providing and laying of flexible PVC pipe (conforming to IS:7634) complete as per specification and direction of the Engineer - in - charge (cost of earth work and fittings will be paid separately) | |||
38 | 18.01 | i) 15 mm dia | 50 | Mtr | |
39 | 18.02 | ii) 32 mm dia | 60 | Mtr |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail