2Nd Call Supply And Installation Of Equipments/Items For Fun/Entertainment Park At 10 ( Ten ) Different School Under Unakoti District .
Tender Value
12.50 Lakhs
Estimated cost
Bid Submission
20 May 2020
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Unakuti → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
2Nd Call Supply And Installation Of Equipments/Items For Fun/Entertainment Park At 10 ( Ten ) Different School Under Unakoti District .
BOQ
| Name of Work:- 2nd Call/Supply and installation of Equipments/Items for fun/entertainment park at 10 (Ten) different School under Unakoti District. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including\ndisposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.\n-All kinds of soil | 1 | 36.25 | cum |
| 2 | 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not\nexceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift\nupto 1.5 m. -All kinds of soil | 2 | 24.17 | cum |
| 3 | 3 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including\nspreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting\neach layer by using plate compactor or by any suitable method complete. | 3 | 5.42 | cum |
| 4 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -\n-All work upto plinth level:\n1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) | 4 | 5.42 | cum |
| 5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size) | 5 | 24.5 | cum |
| 6 | 6 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). \n | 6 | 52.8 | sqm |
| 7 | 7 | Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing,\nbalcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying apriming coat of approved steel primer complete as\nrequired:- . G.I.pipes. 100mm,65mm 40mm dia | 7 | 4279.49 | kg |
| 8 | 8 | Providing and fixing ball bearing for rolling shutters\n(exceeding 10 sqm area) of approved make complete as\nrequired.\n | 8 | 30 | nos. |
| 9 | 9 | Providing and fixing M.S. round holding down bolts with\nnuts and wahser plates complete as per standard design. | 9 | 194.2 | kg |
| 10 | 10 | Galvanised steel plain sheets | 10 | 4.02 | quintal |
| 11 | 11 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using\nsteel etc. complete as required:-In grating, frames, guard bar, railing, brackets, gates and similar works, all complete. | 11 | 450 | kg |
| 12 | 12 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass (weight not less than 10ks/Sqm) panes\nincluding black enamelled ISI marked MS butt hinges with necessary screws.\n Local Teak wood 35 mm thick Sqm | 12 | 51.2 | sqm |
| 13 | 13 | C.P.brass chain with 40 mm dia rubber plug | 13 | 100 | each |
| 14 | 14 | Finishing with Epoxy paint ( two or more coats) of approved brand and manufacture at all locations\nprepared and applied as per manufacturer's specification including appropriate priming coat,\npreparation of surface etc. complete [Payment shall be made after submission of Test Certificate issued by the Manufacturer].\n12.36.1 On steel work | 14 | 400.081 | sqm |
AI Tender Summary
Tender Timeline
Apr 28, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMay 20, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 21, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender