Military Engineer Services-MES has published Repair To Fan , Electric Meters And Day To Day Complaints Of Internal Electrification Under Ge Gurdaspur .. Submission Date for this Tender is 28-05-2020. Electrification Work Tenders in Garrison Engineer, Gurdaspur (Tibri) Punjab. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 04-May-2020 | Corrigendum No 1 | Date | 21-05-2020 |
2 | 06-May-2020 | Corrigendum No 2 | Other | 21-05-2020 |
3 | 16-May-2020 | Corrigendum No 3 | Other | 21-05-2020 |
4 | 21-May-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-05-2020 |
Name of Work : Repair to fan, electric meters and day to day complaint of internal electrification under GE Gurdaspur. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | BOQ | |||
2 | 2 | Taking down of ceiling fans 1200/1400mm sweep, AC, 230 volts of any make and carrying out servicing by cleaning thoroughly using soap solution strip opening the motor and carrying necessary repair by replacing defective parts e.g. bearing, bushes, shafts etc as required, carrying out lubrication using proper grade oil/grease reassembling and refixing at site complete all as directed. Note :- Spares reqd for replacement shall be measured and paid separately. | 2500 | Each | |
3 | 3 | Material & Labour for re-winding of ceiling fans motor 1200 mm sweep, AC, 230 volt any make with super enameled copper winding wire of appropriate guage as per original size including cutting and getting out old burnt winding, varnishing and E class insulation varnish, providing insulation tape/sleeves and making connection with three core copper flexible cable of size 23/0.0076mm of length not less than one metre with each fan complete all as specified and directed. Note : (i) Varnish using ISI brand shellac varnish (ii) Motor shall be wound with machine only. (iii) Re-fixing of repaired fan in any location of cantt area AOR GE GSP shall be the responsibility of the contractor at his expense (iv) BIC/ HTP/DEVIDYAL make super enamelled copper wire shall be used for winding of fan. (v) All spares e.g. bearing, split pin, canopy , capacitor etc reqd during repairs shall be measured and paid separately. | 1200 | Each | |
4 | 4 | All as per Ser Item No 02 above but of size 1400mm sweep. | 350 | Each | |
5 | 5 | Supply and fixing in replacement capacitor AC 415 volts 2.25 Mfd Make : Havells/Tibcon/Usha/asian | 950 | Each | |
6 | 6 | All as per Ser Item No 05 above but of size 3.15 Mfd. Make : Havells/Tibcon/Usha/asian | 350 | Each | |
7 | 7 | All as per Ser Item No 05 above but of size 4 Mfd. Make : Havells/Tibcon/Usha/asian | 250 | Each | |
8 | 8 | Supply and fixing in repair ball bearing of size 6200 complete all as specified and directed. Make :- NBC/SKF/TATA | 400 | Each | |
9 | 9 | Supply and fixing in repair ball bearing of size 6201, 6202, make NBC/SKF/TATA | 400 | Each | |
10 | 10 | Supply and fixing in repair ball bearing of size 6203, make NBC/SKF/TATA . | 100 | Each | |
11 | 11 | Material & labour for lathe work for any ceiling fan for taking out bush from the lower body part of rotor and replacing with suitable size of ball bearing 6200 to 6204 as per matching with shafts, making necessary boring, cutting, grinding, polishing of shaft complete all as specified and directed. (Bearing shall be measured and paid under respective item of schedule as measured and paid separately) | 180 | Each | |
12 | 12 | Supply and fixing in repair gun metal bush of ceiling fan any size complete all as specified and directed. | 400 | Each | |
13 | 13 | Supply and fixing in repair rubber reel of ceiling fan complete with MS split clamp 02 nos nut and bolts complete all as specified and directed. | 600 | Each | |
14 | 14 | Taking down of exhaust fans 200mm to 450mm sweep, AC, 230 volts of any make and carrying out servicing by cleaning thouroughly strip opening the motor and carrying necessary repair by replacing defective parts e.g. bearing, bushes, shafts etc as required, carrying out lubrication using proper grade oil/grease reassembling and re-installing complete all as directed. Note :- Spares reqd for replacement shall be measured and paid separately. | 230 | Each | |
15 | 15 | Material & Labour for re-winding of exhaust fan motor size 300 mm sweep with super enameled copper winding wire appropriate guages as per original size including cutting and getting out old burnt winding, varnishing and E class insulation varnish, providing insulation tape/sleeves and making connection with 3 core PVC insulated and sheathed copper flexible wire of size 40/0.0076 mm of length not more than 01 metre including painting complete all as directed. Note - (i) Doctor brand or ISI brand varnish shall be used. (ii) Motor shall be wound with machine only. (iii) Fixing of repaired fan in any location of AOR GE GSP area shall be the responsibility of the contractor at there own expense. (iv) BIC/ HTP/DEVIDYAL make supper enamelled copper wire shall be used for re-winding. | 80 | Each | |
16 | 16 | Material & Labour for re-winding of exhaust fan motor size 450 mm sweep with super enameled copper winding wire appropriate guages as per original size including cutting and getting out old burnt winding, varnishing and E class insulation varnish, providing insulation tape/sleeves and making connection with 3 core PVC insulated and sheathed copper flexible wire of size 40/0.0076 mm of length not more than 01 metre including painting complete all as directed. Note - (i) Doctor brand or ISI brand varnish shall be used. (ii) Motor shall be wound with machine only. (iii) Fixing of repaired fan in any location of AOR GE GSP area shall be the responsibility of the contractor at there own expense. (iv) BIC/ HTP/DEVIDYAL make supper enamelled copper wire shall be used for re-winding. | 20 | Each | |
17 | 17 | Material & Labour for re-winding of exhaust fan motor size 200 to 250 mm sweep with super enameled copper winding wire appropriate guages as per original size including cutting and getting out old burnt winding, varnishing and E class insulation varnish, providing insulation tape/sleeves and making connection with 3 core PVC insulated and sheathed copper flexible wire of size 23/0.0076 mm of length not more than 01 metre including painting complete all as directed. Note B28- (i) Doctor brand or ISI brand varnish shall be used. (ii) Motor shall be wound with machine only. (iii) Fixing of repaired fan in any location of AOR GE GSP area shall be the responsibility of the contractor at there own expense. (iv) BIC/ HTP/DEVIDYAL make supper enamelled copper wire shall be used for re-winding. | 130 | Each | |
18 | 18 | Supply and fixing in replacement down rod of ceiling fan complete with split pin, hanging clamp and rubber reel (Length of rod not less than 45 cm ). | 150 | Each | |
19 | 19 | Material & labour for Painting of ceiling fan 1200/1400mm sweep using two coat of synthetic enamelled white spray paint including preparation of surface by filling cavities and writing MES Nos of appropriate font size complete all as directed. | 2500 | Each | |
20 | 20 | Supply and fixing in-replacement ceiling fan blade set suitable for 1200 mm sweep ceiling fan of an existing make all as specified and directed. | 150 | Set of three | |
21 | 21 | Supply and fixing in-replacement ceiling fan blade set suitable for 1400 mm sweep ceiling fan of an existing make all as specified and directed. | 75 | Set of three | |
22 | 22 | Supply and fixing inreplacement exhaust fan blade set suitable for 200mm to 300mm of an existing make all as specified and directed. | 110 | Set of three | |
23 | 23 | Supply and fixing inreplacement exhaust fan blade set suitable for 450mm of an existing make all as specified and directed. | 30 | Set of three | |
24 | 24 | Material and labour of replacement of old/wornout metallic louvers of exhaust fan upto 450 mm at any location and fixed new metallic louvers with iron frame complete all as specified and directed. | 60 | Each | |
25 | 25 | Material and labour in replacement of old/wornout top and bottom canopy of ceiling fan at any location and fixed new canopy at top and bottom of ceiling fan as per existing make complete all as specified and directed. | 50 | Set of two | |
26 | 26 | S&F in replacement of 4 No legs , one no frame including rubber packing nut bolts , blade incl fixing the existing motor in the frame suitable for 450mm complete all as specified and directed. | 15 | Each | |
27 | 27 | S&F in replacement of 4 no legs , one no frame including rubber packing nut bolts , blade incl fixing the existing motor in the frame suitable for 300mm complete all as specified and directed. | 6 | Each | |
28 | 28 | Supply and fixing bell ding-dong, 230 volts, single phase complete all as specified and as directed. Make for Srl item No 28 to 37 :- Cona/Plaza/HPL/Havells | 200 | Each | |
29 | 29 | Supply and fixing switch piano flush type 5 Amps one way, AC 230V, 50Hz all as specified and as directed. | 800 | Each | |
30 | 30 | Supply and fixing switch piano type two way AC 230 volts of any make/model as per on existing switch board complete all as specified and as directed. | 30 | Each | |
31 | 31 | Supply and fixing of switch piano flush type 15 Amps single pole one-way, 230V, 50Hz complete all as specified and as directed. | 400 | Each | |
32 | 32 | Supply and fixing socket out let 2-in-1, 3 Pin 5 Amps flush type 230 volts complete all as specified and as directed. | 300 | Each | |
33 | 33 | Supply and fixing socket outlet, flush type, 2-in-1, 3 pins, 5 & 15 Amps multipurpose complete all as specified and as directed. | 400 | Each | |
34 | 34 | Supply and fixing plug top 3 pin, 5 Amps complete all as specified and as directed. | 50 | Each | |
35 | 35 | Supply and fixing plug top 3 pin, 15 Amps complete all as specified and as directed. | 100 | Each | |
36 | 36 | Supply and fixing bell push switch piano, flush type, 5 Amps complete all as specified and as directed. | 50 | Each | |
37 | 37 | Supply and fixing of ceiling rose 65x50mm three terminals AC 230 volts complete all as specified and directed of any make/model as per in existing building. | 300 | Each | |
38 | 38 | Supply and fixing in replacement PVC conduit 25mm medium grade for passing through submains complete with all fittings such as tee, bends,elbow, saddle etc and making good the disturbed surfaces etc (Cutting , chasing,finishing shall be included in this Item complete all as specified. | 50 | RM | |
39 | 39 | Supply and fixing PVC rectangular block for mounting switches, sockets, fan regulator etc 3mm thick plastic laminated sheet cover of size 100mm x 100mm and 50mm deep complete all as specified and as directed. | 20 | Each | |
40 | 40 | Supply and fixing 3mm thick plastic laminated sheet of size 4 inch x 4 inch including brass screws and washers etc complete all as specified and as directed. | 25 | Each | |
41 | 41 | Supply and fixing modular switch one-way, 6 amp 1 module AC 230V, 50Hz all as specified and as directed. Make Havells/SSK/Cona | 300 | Each | |
42 | 42 | Supply and fixing modular switch 16 Amps One-way,I module AC 230V, 50Hz all as specified and as directed. Make Havells/SSK/Cona | 100 | Each | |
43 | 43 | Supply and fixing modular switch socket outlet 3 pin 5Amps One-way, AC 230V, 50Hz all as specified and as directed. Make Havells/SSK/Cona | 70 | Each | |
44 | 44 | Supply and fixing modular switch socket outlet 3 pin 15Amps One-way, AC 230V, 50Hz all as specified and as directed. Make Havells/SSK/Cona. | 60 | Each | |
45 | 45 | S&F indoor type decorative box type fitting made of CRCA for 20/22 watt LED rod complete all as specified and as directed. Make :- Havells/HPL/Polycab/Grandlay | 50 | RM | |
46 | 46 | S & F indoor tpe decorative LED rod 18/20 watt suitable for decorative box type fitting complete all as specified & directed. Make :- Havells/Wipro/Crompton | 350 | Each | |
47 | 47 | S&F on 2 PVC square blocks surface mounting universal batten housing made of powder coated CRCA sheet suitable for upto 1 x 18/20 W LED tube rod single sided in taking down old unserviceable fitting complete all as directed. Make :- Havells/Philips/Wipro | 600 | Each | |
48 | 48 | Supply and fixing PVC insulated flexible copper conductor cable three twisted of size 24/0.20mm 1100 volts grade complete all as specified and as directed. | 200 | RM | |
49 | 49 | Supply and fixing PVC insulated flexible copper conductor cable three twisted of Size 32/0.20mm 1100 volts grade complete all as specified and as directed. | 200 | RM | |
50 | 50 | Supply and fixing MCB SP 6 – 32 amps, B curve AC 230 volts complete all as specified and directed. Make :- Havells/C&S/Standard/HPL | 200 | Each | |
51 | 51 | Supply and fixing MCB 10-40 amps C curve single pole with neutral, AC 230 volts complete all as specified and directed. Make :- Havells/C&S/Standard/HPL | 150 | Each | |
52 | 52 | Supply and fixing PVC batten type lamp holder insulated body with back plate suitable for batten fitting including PVC round block and taking out unserviceable lamp holder complete all as specifed and as directed. | 150 | Each | |
53 | 53 | Supply and fixing fan regulator electronic type 5 step minimum 100w 240V and connecting all as specified and directed Make :- Havells/Cona/SSK/HPL | 400 | Each | |
54 | 54 | Supply and fixing MS machine screw 25 mm long suitable for fixing bakelite sheets / square blocks with sunken boards of dia not more than 5 mm complete all as specified and directed . | 500 | Each | |
55 | 55 | Supply and fixing MS machine screw 50 mm long suitable for fixing bakelite sheets / square blocks with sunken boards of dia not more than 5 mm complete all as specified and directed . | 500 | Each | |
56 | 56 | Supply and fixing in relacement 1100 Volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape and over all PVC Sheathed in service connections suspended by insulating hangers not more than 1 meter a part including 4mm suspension wire, one twin core 6 Sqmm cable standard conductor cable flat or circular all as specified and directed by Engineer- in- Charge. Make:- Grandlay /Finolex/Paragon. | 400 | RM | |
57 | 57 | Supply and fixing in relacement 1100 Volts grade heavy duty cable with PVC insulated aluminium standard conductor served with an inner sheathing of PVC tape and over all PVC Sheathed in service connections suspended by insulating hangers not more than 1 meter a part including 4mm suspension wire, one twin core 10 Sqmm cable standard conductor cable flat or circular all as specified and directed by Engineer- in- Charge. Make :- Grandlay /Finolex/Paragon. | 500 | RM | |
58 | 58 | Supply and fixing PVC insulated unsheathed multi strandard single core copper conductor FR 1100 V grage type 2.5 sqmm etc. complete all as directed. Make:- Havells/Grandlay/HPL | 3 | Each Role of 90 RM | |
59 | 59 | Supply and fixing PVC insulated unsheathed multi strandard single core copper conductor FR 1100 V grade type 1.5 sqmm etc. complete all as directed. Make:- Havells/Grandlay/HPL | 4 | Each Role of 90 RM | |
60 | 60 | Taking down old unserviceable KWH Meter deposit to AGE E/M store yard for safe custody complete all as specified and directed. | 310 | Each | |
61 | 61 | Supply and fixing in repair AC single phase static energy meter of accuracy class 1.0,240 volt,50 Hz,backlit LED display of rating 10-60 Amps (Measure and displays KWH,V,I,KW,last month history of KWH &Mdin KW)with special features like TOD,Tamper logging,optical communication port and display in absence of power with transparent Hinge type box including one PVC Box of Size 12X10 " of Make:- HPL/L&T/Secure.( U/S electric meter deposit to MES store yard for BER) | 300 | Each | |
62 | 62 | Supply and fixing in repair AC three phase static energy meter of accuracy class 1.0,240 volt,50 Hz,backlit LED display of rating 10-60 Amps (Measure and displays KWH,V,I,KW,last month history of KWH & Mdin KW)with special features like TOD,Tamper logging,optical communication port and display in absence of power with transparent Hinge type box including one PVC Box of Size 12X10 " of Make:- HPL/L&T/Secure.( U/S electric meter deposit to MES store yard for BER) | 10 | Each | |
63 | 63 | Supply and fixing in repair octane 18 watt 4000K LED Panel square slim compact aluminium die cast edge lit panel recess mounted square with opal diffuser and separate electronic driven of size 210x210mm all as specified and directed. | 50 | Each | |
64 | 64 | Supply and fixing in repair octane 9watt 4000k LED Panel round slim compact aluminium die cast edge lit panel recess mounted square with opal diffuser and separate electronic driven of size 138x138mm all as specified and directed. | 25 | Each | |
65 | 65 | Supply and fixing in repair octane 18 watt 4000k LED Panelround slim compact aluminium die cast edge lit panel recess mounted square with opal diffuser and separate electronic driven 287x287mm all as specified and directed | 40 | Each | |
66 | 66 | Supply and fixing in repair indoor type decorative recess mounted direct/indrect 2x2 lumanaries light fixures made up to 36 watt LED netural white complete including making connection with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. | 20 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail