Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited-UPRVUNL has published 908/Epd-Ii/Btps/Anp/2020-21 Supply , Installation And Commissioning Of Magnetic Flow Meters For Atp , Anpara. Submission Date for this Tender is 14-05-2020. Flow Sensors Tenders in ANPARA SONEBHADRA Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Supply, Installation and Commissioning of Magnetic Flow Meters for ATP Anpara | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Electromagnetic Flow meter for LP Pumps \n (04 nos. Pumps for each unit) common header \nDischarge Line for unit 4 &5 BTPS. \n Type of Flow sensor: Full Bore Type \n Medium: Clean Raw water \n Fluid velocity: 2-3 m/s \n material of Pipe= MS Line Line Size: 450 mm NB \n Operating Pressure: 10 Kg/cm2 \n Maximum Pressure: 20 kg/cm2 \n Maximum flowrate: 1260 m3/hr\n | item1 | 2 | Nos. |
| 2 | 2 | Electromagnetic Flow meter for HP Pumps \n ( 04 nos. Pumps for each unit) common header \nDischarge Line for unit 4 &5 BTPS. \nType of Flow sensor: Full Bore Type \n Medium: Clean Raw water \n Fluid velocity: 2-3 m/s \n material of Pipe= MS Line Line Size:400 mm NB \n Operating Pressure: 14 Kg/cm2 \n Maximum Pressure: 20 kg/cm2 \n Maximum flowrate: 800 m3/hr\n | item2 | 2 | Nos. |
| 3 | 3 | Electromagnetic Flow meter for LP Pumps \n (05 Nos. for all three units of ATPS) \ncommon header Discharge Line for unit 1,2 &3 ATPS. Type of Flow sensor: Full Bore Type \n Medium: Clean Raw water \n Fluid velocity: 2-3 m/s \n material of Pipe= MS Line \n Working Principle: Faradey Law's of Electromagnetic Induction \n Line Size:500 mm NB \nOperating Pressure: 6.5 Kg/cm2 \n Maximum Pressure: 12 kg/cm2 \n Wire housing: welded sheet steel \n Maximum flow rate: 1000 m3/hr\n | item3 | 1 | Nos. |
| 4 | 4 | Electromagnetic Flow meter for HP Pumps \n (05 nos. Pumps for all three units of ATPS) common header Discharge Line for unit 1, 2 & 3 ATPS. Type of Flow sensor: Full Bore Type \n Medium: Clean Raw water \n Fluid velocity: 2-3 m/s \n material of Pipe= MS Line \n Line Size: 450 mm NB \n Operating Pressure: 10 Kg/cm2 \n Maximum Pressure: 20 kg/cm2 Maximum flowrate:1000 m3/hr\n | item4 | 1 | Nos. |
| 5 | 5 | Electromagnetic Flow meter for AWRS Pumps for DTPS Discharge Line for unit 6&7. \n Type of Flow sensor: Full Bore Type \n Medium: AWRS Pond water \n Fluid velocity: 2-3 m/s \n Material of Pipe= MS Line \n Working Principle: Faradey Law's of Electromagnetic Induction Line Size: 800 mm NB \n Operating Pressure: 12-15 Kg/cm2 \n Maximum Design Pressure: 20 kg/cm2 \n Wire housing: welded sheet steel \n Maximum flowrate: 4000 m3/hr \n Pressure of AWRS water:<16 kg/cm2\n | item5 | 1 | Nos. |
| 6 | 6 | Electromagnetic Flow meter for AWRS Pumps for ATPS & BTPS Discharge Line for unit 1 to 5. Type of Flow sensor: Full Bore Type \n Medium: AWRS Pond water \n Fluid velocity: 2-3 m/s \n Material of Pipe= MS Line \n Working Principle: Faradey Law's of Electromagnetic Induction Line Size: 500 mm NB \n Operating Pressure: 12-15 Kg/cm2 \n Maximum Design Pressure: 20 kg/cm2 \n Wire housing: welded sheet steel \n Maximum flowrate: 3000 m3/hr \n Pressure of AWRS water:<16 kg/cm2\n | item6 | 2 | Nos. |
| 7 | 7 | Clamp ON Ultrasonic Flow meter for BALP Pumps \n(03 nos. BALP for all two units of DTPS) common header Discharge Line for unit 6&7 DTPS. Type of Flow sensor: Clamp On Type \n Medium: Clean Raw water \n Fluid velocity: 2-3 m/s \n material of Pipe= MS Line Operating Pressure: 2.5 Kg/cm2 \nMaximum Pressure: 5.0 kg/cm2 \nMaximum flowrate:1210 m3/hr.\nLine Size: 400 mm NB\n | item7 | 1 | Nos. |
| 8 | 8 | Clamp ON Ultrasonic Flow meter for BALP Pumps \n(03 nos. BALP for all two units of DTPS) common header Discharge Line for unit 6&7 DTPS. Type of Flow sensor: Clamp On Type \n Medium: Clean Raw water \n Fluid velocity: 2-3 m/s \n material of Pipe= MS Line Operating Pressure: 2.5 Kg/cm2 \nMaximum Pressure: 5.0 kg/cm2 \nMaximum flowrate:1210 m3/hr.\nLine Size: 300 mm NB\n | item8 | 1 | Nos. |
| 9 | 9 | Clamp ON Ultrasonic Flow meter for BAHP Pumps \n(02 nos. for all two units of DTPS) common header Discharge Line for unit 6&7 DTPS. Type of Flow sensor: Full Bore type\n Medium: Clean Raw water \n Fluid velocity: 2-3 m/s \n material of Pipe= MS Line Operating Pressure: 9.0 Kg/cm2 \nMaximum Pressure: 15.0 kg/cm2 \nMaximum flowrate: 1050 m3/hr.\nLine Size: 300 mm NB\n | item9 | 1 | Nos. |
| 10 | 10 | Clamp ON Ultrasonic Flow meter for Flush Pumps (01 nos. for all two units of DTPS) header Discharge Line for unit 6 &7 DTPS. Type of Flow sensor: Full Bore Type \n Medium: Clean Raw water \n Fluid velocity: 2-3 m/s \n material of Pipe= MS Line Operating Pressure: 2 Kg/cm2 \n Maximum Pressure: 5 kg/cm2 \n Maximum flowrate:965 m3/hr \nLine Size: 400 mm NB\n | item10 | 1 | Nos. |
| 11 | 11 | Clamp ON Ultrasonic Flow meter for FAHP Pumps \n( 03 nos. for all two units of DTPS) Common header Discharge Line for unit 6 &7 DTPS. \n Type of Flow sensor: Full Bore Type \n Medium: Clean Raw water \n Fluid velocity: 2-3 m/s \nMaterial of Pipe= MS Line Operating Pressure: 7.5 Kg/cm2 \n Maximum Pressure: 15 kg/cm2 \n Maximum flowrate: 1050 m3/hr.\nLine Size: 350 mm NB\n | item11 | 1 | Nos. |
| 12 | 12 | Clamp ON Ultrasonic Flow meter for FAHP Pumps \n( 03 nos. for all two units of DTPS) Common header Discharge Line for unit 6 &7 DTPS. \n Type of Flow sensor: Full Bore Type \n Medium: Clean Raw water \n Fluid velocity: 2-3 m/s \nMaterial of Pipe= MS Line Operating Pressure: 7.5 Kg/cm2 \n Maximum Pressure: 15 kg/cm2 \n Maximum flowrate: 1050 m3/hr.\nLine Size: 200 mm NB\n | item12 | 1 | Nos. |
| 13 | 13 | Clamp ON Ultrasonic Flow meter for recirculation line from Bottom Sludge Tank to Suction tank of ash water Pumps, Two recirculation line for unit 6 &7 DTPS. \n Type of Flow sensor: Full Bore Type \n Medium: Clean Raw water \n Fluid velocity: 2-3 m/s \n material of Pipe= MS Line Operating Pressure: 7.5 Kg/cm2 \n Maximum Pressure: 15 kg/cm2 \n Maximum flowrate:1050 m3/hr\nLine Size: 300 mm NB\n | item13 | 1 | Nos. |
| 14 | 14 | Clamp ON Ultrasonic Flow meter for recirculation line from Bottom Sludge Tank to Suction tank of ash water Pumps, Two recirculation line for unit 6 &7 DTPS. \n Type of Flow sensor: Full Bore Type \n Medium: Clean Raw water \n Fluid velocity: 2-3 m/s \n material of Pipe= MS Line Operating Pressure: 7.5 Kg/cm2 \n Maximum Pressure: 15 kg/cm2 \n Maximum flowrate:1050 m3/hr\nLine Size: 200 mm NB\n | item14 | 1 | Nos. |
| 15 | 15 | HMI with Touch Screen one for ATPS&BTPS and other one for DTPS | item15 | 2 | Nos. |
| 16 | 16 | Magnetic flow data logger with continuous data connectivity to CPCB/UPCPCB server through GSM 4G/3G/@G modem with 05 year License one for ATPS&BTPS and other one for DTPS | item16 | 2 | Nos. |
| 17 | 17 | AC control panel (PORTA cabin) with standard fitting like AC SPD, Power supplies, MCB, terminal Blocks, standard Key Lock | item17 | 2 | Nos. |
| 18 | 18 | Central monitoring system | item18 | 2 | Nos. |
| 19 | 19 | Air conditioner control panel | item19 | 2 | Nos. |
| 20 | 20 | Erection, Installation testing and commissioning of electromagnetic Flow meters Equipment along with all accessories as mentioned above and as per requirement of pollution control Board | item20 | 1 | job |
| 21 | 21 | Comprehensive Maintenance Contract for routine, Preventive/breakdown maintenance of all installed system(Per month charges should be quoted in BOQ) | item21 | 36 | job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
