Ge/863/Ews-T-81 Of 2019-20 Special Repair To Flooring Ceilings Of Bldg No T240 T241 Of 2136 Fd Hosp At Karcham Spl Repair To Flooring Kota Stone Of Bldg No T242 T235 T236 Of 426 I Fd Coy At Karcham Special Repair To Bldg No T245b Of 1841 Pnr Unit At Karc
Tender Value
23.50 Lakhs
Estimated cost
Bid Submission
17 Jun 2020
0 days left
EMD
47000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KARCHAM → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Ge/863/Ews-T-81 Of 2019-20 Special Repair To Flooring Ceilings Of Bldg No T240 T241 Of 2136 Fd Hosp At Karcham Spl Repair To Flooring Kota Stone Of Bldg No T242 T235 T236 Of 426 I Fd Coy At Karcham Special Repair To Bldg No T245b Of 1841 Pnr Unit At Karcham And
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-May-2020 | The critical dates are hereby postponed due to administrative reasons (i.e. National lockdown) | Date | 23-May-2020 |
| 2 | 14-May-2020 | amendments to BOQ | BOQ | 23-May-2020 |
| 3 | 21-May-2020 | Please carryout following amendments to TENDER DOCUMENTS | Other | 30-May-2020 |
| 4 | 30-May-2020 | The critical dates are hereby postponeD | Date | 17-Jun-2020 |
BOQ
| Name of Work :SPECIAL REPAIR TO FLOORING, CEILINGS OF BLDG NO T-240, T-241 OF 2136 FD HOSP AT KARCHAM, SPL REPAIR TO FLOORING, KOTA STONE OF BLDG NO T-242, T-235, T-236 OF 426 (I) FD COY AT KARCHAM, SPECIAL REPAIR TO BLDG NO T-245B OF 1841 PNR UNIT AT KARCHAM AND SPECIAL REPAIR TO BLDG NO T-234 OF 1841 PNR UNIT AT KARCHAM IN THE AREA OF AGE B/R – I POOH UNDER GE 863 EWS | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings | 1 | 62 | Sqm |
| 2 | 2 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-Charge. | 2 | 30.45 | Cum |
| 3 | 3 | S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roof walls etc with grade of zinc coating 275 | 3 | 37 | Sqm |
| 4 | 4 | S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roof walls etc with grade of zinc coating 275 but except sheet | 4 | 25 | Sqm |
| 5 | 5 | M&L Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge. | 5 | 435 | Sqm |
| 6 | 6 | M&L for preparation of plastered or unplastered old decorated surfaces of wall including pillasters and cornics etc and applying one coat of oil bound distemper complete all as specified and as directed by Engr-in-Charge. | 6 | 325 | Sqm |
| 7 | 7 | M&L for two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed | 7 | 42.18 | Sqm |
| 8 | 8 | Dismantling mild steel work of any description not otherwise provided for | 8 | 1 | Qtl |
| 9 | 9 | M&L for preparation of plastered or unplastered old decorated surfaces of ceiling and applying one coat of white lime wash on ceilling complete all as specified and as directd by Engr-in-Charge. | 9 | 365 | Sqm |
| 10 | 10 | M&L for one coats synthetic enamelled paint incl preparation of old steel surfaces of any description over 10cm width or girth complete all as specifed and as directed | 10 | 343.42 | Sqm |
| 11 | 11 | S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc | 11 | 100 | Kg |
| 12 | 12 | Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each | 12 | 7 | Leaf |
| 13 | 13 | Refixing in the same opening shutters of any description exceeding 1. Sq. M but not exceeding 2 Sq. M each | 13 | 19 | Leaf |
| 14 | 14 | Refixing in the same opening shutters of any description not exceeding 1 Sq. M each. | 14 | 600 | Leaf |
| 15 | 15 | M&L screed bed or bedding layer of morter 20 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles/granite. | 15 | 148.22 | Sqm |
| 16 | 16 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. | 16 | 8 | Sqm |
| 17 | 17 | S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) | 17 | 14 | Sqm |
| 18 | 18 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section | 18 | 3 | Each |
| 19 | 19 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and webof 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. | 19 | 85.5 | Sqm |
| 20 | 20 | S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21. | 20 | 21 | Each |
| 21 | 21 | S&F 6 to 8 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified. | 21 | 85.5 | Sqm |
| 22 | 22 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. | 22 | 14 | Each |
| 23 | 23 | S&F in repair Harrision rail,mild steel,chromium plated with fixing brackets,stops,rolled etc complete all as specified and as directed by Engr-in -charge. | 23 | 12 | RM |
| 24 | 24 | S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. | 24 | 6 | Sqm |
| 25 | 25 | S & F of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed | 25 | 5 | Each |
| 26 | 26 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, in repairs | 26 | 18 | Each |
| 27 | 27 | S & F in repairs of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed | 27 | 7 | each |
| 28 | 28 | Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. | 28 | 80.32 | Sqm |
| 29 | 29 | S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21, in repairs | 29 | 9 | Each |
| 30 | 30 | M&L preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality all as specified and directed . | 30 | 54 | Sqm |
| 31 | 31 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised in repairs | 31 | 14 | Each |
| 32 | 32 | S & F 20 mm dia., Aluminium alloy anodised curtain rails with brackets fixed in repair | 32 | 48 | RM |
| 33 | 33 | S & F of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm | 33 | 8 | Each |
| 34 | 34 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. | 34 | 37.0084 | Sqm |
| 35 | 35 | M & L 4 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions/ shutters, ceiling etc | 35 | 62.72 | Sqm |
| 36 | 36 | S&F 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifed and as directed | 36 | 37.0084 | Sqm |
| 37 | 37 | S&F aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs | 37 | 2 | Each |
| 38 | 38 | S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq. cm | 38 | 101 | RM |
| 39 | 39 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. | 39 | 41.2131 | Cum |
| 40 | 40 | S&F4 lever Mortice lock Brass vertical type size 100 mm | 40 | 2 | Each |
| 41 | 41 | Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sq. Cm in section. | 41 | 101 | RM |
| 42 | 42 | M &L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge | 42 | 267.72 | Sqm |
| 43 | 43 | S & F Second class hard wood plain fillets square, rectangular or triangular in section, wrought, bull nosed splayed chamfered or rounded on one edge or face sectional area exceeding 13 and not exceeding 25 Sq. cm | 43 | 101 | RM |
| 44 | 44 | M & L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing /footpath | 44 | 200 | Sqm |
| 45 | 45 | S&F Machine cut kota stone slab flooring 20-25mm thick over and including cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete | 45 | 75 | Sqm |
| 46 | 46 | Ditto but as in vertical surfaces such as skirting, dado etc | 46 | 4 | Sqm |
| 47 | 47 | S & F in repairs of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm | 47 | 5 | Each |
| 48 | 48 | Demolition of stone slabs and tiles of any description or thickness in floors/dado etc laid bedded and pointed in any mortar | 48 | 11 | 10 Sqm |
| 49 | 49 | S & F Chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors. | 49 | 90 | Sqm |
| 50 | 50 | Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment | 50 | 110 | Sqm |
| 51 | 51 | Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges | 51 | 2.5 | Cum |
| 52 | 52 | S & F in repair Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples | 52 | 2 | Sqm |
| 53 | 53 | Sand filling under floors or in foundations including watering and consolidation | 53 | 5.5 | Cum |
| 54 | 54 | M&L rendering 10mm thick in cement plaster 1:4 on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles/granite | 54 | 47 | Sqm |
| 55 | 55 | Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonary with solid blocks built in cement mortar 1:6 | 55 | 20 | Cum |
| 56 | 56 | M&L for walling of random rubble stone masonry uncourced well bonded bedded and solidly hearted built in CM 1:6 complete all as specified and as directed | 56 | 6.8 | Cum |
| 57 | 57 | M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections, finished even and smooth w/o using extra cement | 57 | 100.5 | Sqm |
| 58 | 58 | M/L precast PCC 1:3:6 type C1 using 20mm graded stone agg as bonder stones set in cement mortar 1:6 complete all as specified and as directed | 58 | 0.19 | Cum |
| 59 | 59 | Taking down cement plastering of any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed. | 59 | 105 | Sqm |
| 60 | 60 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises | 60 | 42 | Sqm |
| 61 | 61 | S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match. | 61 | 192.72 | Sqm |
| 62 | 62 | M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles/granite. | 62 | 192.72 | Sqm |
| 63 | 63 | M & L for Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match | 63 | 12 | Sqm |
| 64 | 64 | Material & labour for white washing three coats on walls incl preparation of newly plastered surfaces.complete all as specified and directed by Engr In Charge. | 64 | 80 | Sqm |
| 65 | 65 | Demolition of stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but including ashlar facings, dressed stonework and precast concrete articles. | 65 | 26.8 | Cum |
| 66 | 66 | M/L preparation of old surface of wall plastered including cornices and pillasters etc and applying one coat of white wash on wall all as specified and as directed by Engr-in-Charge. | 66 | 120 | Sqm |
| 67 | 67 | M & L rendering 15mm thick on fair faces of concrete work in CM 1:6 incl finished even and smooth without using extra cement. | 67 | 90 | Sqm |
| 68 | 68 | M&L for preparation of surfaces of new plaster surface of wall and applying two coat of cement base paint complete all as specified and directed. | 68 | 63 | Sqm |
| 69 | 69 | M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match | 69 | 30 | Sqm |
| 70 | 70 | M&L preparation of old painted surface of wall and applying one coat of oil bound distember all as specified | 70 | 240 | Sqm |
| 71 | 71 | M/L preparation of old surface of wall plastered including cornices and pillasters etc and applying one coat of cement base paint on wall all as specified and as directed by Engr-in-Charge. | 71 | 679 | Sqm |
| 72 | 72 | M & L rendering 15mm thick on fair faces of concrete work in CM 1:4 incl finished even and smooth without using extra cement. | 72 | 53 | Sqm |
| 73 | 73 | M&L for Rendering 15mm thick on stone masonary surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed. | 73 | 88 | Sqm |
| 74 | 74 | M&L preparation of old painted surface of ceiling and applying one coat of oil bound distember all as specified | 74 | 105 | Sqm |
| 75 | 75 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. | 75 | 0.5 | Cum |
| 76 | 76 | M&L Reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, as directed. | 76 | 0.06 | Cum |
| 77 | 77 | M&L RCC 1:2:4 type B1 (using 20mm graded aggregate) as in beam, cantilever,lintel over 1.5 m span. | 77 | 0.16 | Cum |
| 78 | 78 | Precast cement concrete 1:3:6, type C1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 | 78 | 0.072 | Cum |
| 79 | 79 | Form work rough finished surfaces of concrete to sides and soffits of beams , lintel and similar items complete | 79 | 2.4 | Sqm |
| 80 | 80 | Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing w | 80 | 20 | Kg |
| 81 | 81 | Dismantaling water tanks and removing to store exc 500 but n. exc 1000 ltrs | 81 | 2 | Each |
| 82 | 82 | S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position inc 20mm bore PVC float valve all as specified and directedin SSR Pt I | 82 | 2 | Each |
| 83 | 83 | Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 15 mm dia . | 83 | 16 | RM |
| 84 | 84 | Ditto as per item above but 20 mm dia . | 84 | 31 | RM |
| 85 | 85 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. | 85 | 15 | RM |
| 86 | 86 | S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. | 86 | 30 | RM |
| 87 | 87 | Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) | 87 | 1 | RM |
| 88 | 88 | Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) | 88 | 1 | RM |
| 89 | 89 | S & F in repairs 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. | 89 | 12 | Each |
| 90 | 90 | S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. | 90 | 4 | Each |
| 91 | 91 | S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe. | 91 | 2 | Each |
| 92 | 92 | S &F in repairs of brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed | 92 | 2 | Each |
| 93 | 93 | S&F Towel Rail 600 mm long of PTMT fixedwith and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms) | 93 | 2 | Each |
| 94 | 94 | S & F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long. | 94 | 2 | Each |
| 95 | 95 | S&F for PVC Connections 15mm size with PTMT nuts of length 450 mm | 95 | 4 | Each |
| 96 | 96 | S&F in repair Wash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings | 96 | 2 | Each |
| 97 | 97 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers | 97 | 2 | Each |
| 98 | 98 | S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity . | 98 | 2 | Each |
| 99 | 99 | S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete | 99 | 2 | Each |
| 100 | 100 | M&L PVC (SWR) floor trap , plain with grating including jointing with solvent cement 75 mm dia | 100 | 2 | Each |
| 101 | 101 | S&F grating doom 100 mm size of PTMT (min weight 25 grms) | 101 | 2 | Each |
| 102 | 102 | S&F 32 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kgf per sqcm fixed to walls, ceilings or in floors etc. | 102 | 3 | RM |
| 103 | 103 | S & F 50 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc. | 103 | 5 | RM |
| 104 | 104 | Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation in hard/ dense soil and getting out | 104 | 1 | Cum |
| 105 | 105 | Demolition and breaking up drain pipes , 100 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar. | 105 | 5 | RM |
| 106 | 106 | M&L Concrete bed to drain pipe 100mm dia incl. packing under and haunching against the sides of pipe PCC 1:4:8 type D2 | 106 | 5 | RM |
| 107 | 107 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches. | 107 | 5 | RM |
| 108 | 108 | Returning filling in including spreading, levelling , watering and well ramming n exc. 25 cm in layers (Soil) | 108 | 0.9 | CUM |
| 109 | 109 | Removal of excavated surplus (soils) at a distance exc. 1.5 Km but n. exc 5.0 Km | 109 | 0.1 | CUM |
| 110 | 110 | Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. all as directed by engineer in charge. | 110 | 63 | Per Point |
| 111 | 111 | Taking down unserviceable main switches, DBs / changeover switch alongwith Teak wood boards etc and making good the disturbed surfaces of wall / floors to match the existing surface all as directed at site. | 111 | 4 | Each |
| 112 | 112 | M&L for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified for the following:- | 112 | ||
| 113 | 112.01 | One light point / Fan/ bell point controlled by one switch | 113 | 33 | Per Point |
| 114 | 112.02 | One socket 3 Pin 5A pin socket oulet 5Amps on same board with cables 1.5 Sqmm size | 114 | 5 | Per Point |
| 115 | 112.03 | One socket 3 Pin 5A pin socket oulet 5Amps on indepndent board with cables 1.5 Sqmm size | 115 | 12 | Per Point |
| 116 | 112.04 | One socket 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 4 Sqmm size | 116 | 5 | Per Point |
| 117 | 113 | S&F switch piano flush type single pole one way 5/6 Amps. | 117 | 50 | Each |
| 118 | 114 | S&F lamp holder Angle / batton type insulated body with back plate and to be fixed on PVC bock. Including dismantling old one. | 118 | 4 | Each |
| 119 | 115 | S&F socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one. | 119 | 13 | Each |
| 120 | 116 | S&F of switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge including dismantling old one. | 120 | 5 | Each |
| 121 | 117 | S&F socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type including old one | 121 | 5 | Each |
| 122 | 118 | S&F ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one. Make : Anchor / Leader / Kinjal | 122 | 29 | Each |
| 123 | 119 | S&F LED integrated batten tube light fittings 20W 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed. Make Cat Part No:LTTB4F20WLED/W of C&S or equivalent in Philips/Bajaj/Crompton Greaves/Wipro. | 123 | 25 | Each |
| 124 | 120 | M&L DB SPN sheet metal enclosure single door suitable for mounting MCB 240 Volts with busbar 8 way including dismantling old one. | 124 | 3 | Each |
| 125 | 121 | S&F MCB SPN 230 Volts 40 Amps. | 125 | 3 | Each |
| 126 | 122 | S&F MCB SP 230 Volts 6- 32 Amps. | 126 | 20 | Each |
| 127 | 123 | S&F LED Street lights 35/36 W IP 65 | 127 | 4 | Each |
| 128 | 124 | S&F LED lamp 9W system lumen (NOM) 600 with all accessories all as specified and directed by Engr-in-Charge. Make: CG Cat part No:- LSW-9W-CDL-BC or Equivelant as approved | 128 | 4 | Each |
| 129 | 125 | Material & labour for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plate No 3 of SSR part-I 2009 connected to main switch board all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 15 mm dia of light grade, for protection of earth lead complete all as specified and directed. | 129 | 3 | Each |
| 130 | 126 | S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart incl 4 mm suspension wire, one twin core cable flat of size 10 Sqmm. | 130 | 210 | RM |
| 131 | 127 | S&F Submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required 2x 4 Sqmm and 1x2.5sqmm earth wire . | 131 | 18 | RM |
| 132 | 128 | S&F CFL light fitting, 1 x 9 W Bulk head luminaries with lamp holders, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 v, 50 Hz. | 132 | 4 | Each |
| 133 | 129 | M & L for House service bracket (hook type) complete with 3.0 mtr long G.I pipe 40mm dia Med grade, two nos 90 degree bends, MS hook and stay or guy. | 133 | 3 | Each |
| 134 | 130 | Net Contract Sum will be after deducting Sch Of Credit of Rs. 16383.00 | 134 |
AI Tender Summary
Tender Timeline
May 30, 2020
11:30 IST
Tender Published
Tender notice published.
Completed
May 23, 2020
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 23, 2020
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 30, 2020
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 17, 2020
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 17, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 19, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender