| 1 | 1 | Dewatering of existing tank cleaning the inside surfaces of the tank , including taking down loose/damage/breakage concrete of any description from reinforced cement concrete columns, bracing, wall, beams, scraping down walls & bottom surfaces using steel wire brushes to remove all depositions/fungus, other micro organism etc and removing loose / unsound concrete / plaster etc, using light hammer with wooden mallets carefully without damaging existing serviceable structure, chipping old concrete for receiving plastering etc of RCC overhead reservoir upto any height & wire brushes taking out & removing sedimented loose dirt/mud/sludge vegetations and other foreign materials from tank at any height including scaffolding using electric/ mechanical means with brush hand, blower etc and disposal of all the waste/spoil & unserviceable material up to a distance not exc 50 mtr complete all as specified and directed. | 1 | 1600 | Sqm |
|---|
| 2 | 2 | M & L for (reebaklens solution) to exposed corroded reinforcement @ 0.20 ltr/Sqm of exposed reinforcement bars / structural members surfaces at any height including scaffolding , complete all as per manufacturer’s instructions and all as specified and directed. | 2 | 660 | Sqm |
|---|
| 3 | 3 | M&L for Applying minimum 40 micron thick (dry film thickness) coat of epoxy zinc rich primer (Nitozink primer of M/S Fosroc chemicals (India) Pvt ltd / M/S pidilite /M/S Choksey chemicals @ not less than 0.25 litre per sqm of exposed steel reinforcement at any height including scaffolding complete all as per manufacturer's instructions and all as specified and directed. | 3 | 660 | Sqm |
|---|
| 4 | 4 | M&L providing & fixing at any height including scaffolding, welded mild steel wire mesh weight not less than 1.5 Kg per Sqm primed with Nito zink primer & applying 40mm average thick cement mortar in the ratio 1:4 mixed with liquid intergral water proofing compound (conplast 'X' 421 & Nitobond AR manufactured by M/S Fosroc / M/S pidilite /M/S Choksey chemicals , in ratio as per manufacturer's instructions, total chemical not less than 5% by weight of cement with guniting machine / shotgun at a pressure not less than 5 Kg/ Sqcm, complete all as per manufacturer’s instructions and all as specified and directed. | 4 | 1600 | Sqm |
|---|
| 5 | 5 | M & L providing rendering 10 mm thick Cement & sand Mortar 1:4 using liquid water proofing compound Nitobond AR not less than 2% by weight of cement of M/S Fosroc / M/S pidilite /M/S Choksey chemicals as approved by the GE, at any height including scaffolding complete all as per manufacturer’s instructions and all as specified and directed. | 5 | 1600 | Sqm |
|---|
| 6 | 6 | M&L at any height including scaffolding, drilling hole in RCC structure using drilling machine upto a depth of 75mm &18 mm dia, removing dust etc by vacum cleaner & blowers, providing & fixing of heavy grade GI pipe nipple 15mm dia 100mm long on the concrete wall/ column/ beam/ slab/ floor @ 0.60 meter c/c in both direction & injection through nipple of cement slurry mixed with liquid integral water proofing compound (Conplast ''X'' 421 & Nitobond AR manufactured by M/S Forsroc/ M/S pidilite/M/S Choksey chemicals ) as per manufactures instructions of appropriate consistency & CEBEX 100 of M/S Fosroc @ 225 grm per 50 kg bag of cement through nipple & closing the end of nipple with epoxy putty/silica jelly after injection the chemical mixed cement slurry and inclusive of applying two coats of water soluble food grade epoxy with primer on treated surface,complete all as per manufacturer’s instructions and all as specified and directed.\n | 6 | 1600 | Sqm |
|---|
| 7 | 7 | S & F at any height including scaffolding, deformed or twisted mild steel bars 10 mm dia and over, cut to length, bent to shape required including cranking bending spirally or hooping for columns, hooking ends & binding/welding as per site requirement with mild steel wire (annealed) not less than 0.9 mm dia complete all as per manufacturer’s instructions and all as specified and as directed . | 7 | 600 | Kg |
|---|
| 8 | 8 | M&L at any height including scaffolding , preparing New/old plastered or unplastered surfaces and applying two coats of cement based paint , complete all as per manufacturer’s instructions and all as specified and directed. | 8 | 1800 | Sqm |
|---|
| 9 | 9 | Running welding in repairs at any height including scaffolding, thickness of metal n exc 6 mm, complete all as per manufacturer’s instructions and all as specified and directed . | 9 | 135 | Per 10 CM |
|---|
| 10 | 10 | S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders as in RCC overhead reservoirs; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe-290, Gde-E-165 upto any height complete all as specified and directed | 10 | 900 | Kg |
|---|
| 11 | 11 | M&L for applying one coat of synthetic enamel paint including necessary preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth, at any height including scaffolding etc complete all as specified and directed . | 11 | 420 | Sqm |
|---|
| 12 | 12 | M&L for preparation of old plastered or un plastered surfaces of wall and applying two coats of white wash at any height including scaffolding etc complete all as specified and directed. | 12 | 500 | Sqm |
|---|
| 13 | 13 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed | 13 | 15 | Cum |
|---|
| 14 | 14 | M & L for Hardcore of brocken stone aggregates of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed. | 14 | 10 | Cum |
|---|
| 15 | 15 | M&L for sand filling under floors or in foundations, laid in layers not exc 15cm thick, spreading , levelling including watering and consolidation complete all as specified and directed. | 15 | 20 | Cum |
|---|
| 16 | 16 | M&L Cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed. | 16 | 10 | Cum |
|---|
| 17 | 17 | M&L for Machine Pressed precast glazed colour reflective PCC interlocking paver block 60mm thick mixed with grey cement and pigment, laid dry and bedded on sand cushion not less than 40 mm thick, interstices filled in floors/ pathway complete all as specified and as directed .\nNote :- The pattern of paver block shall be approved by GE . | 17 | 130 | Sqm |
|---|
| 18 | 18 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed. | 18 | 40 | Cum |
|---|
| 19 | 19 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and as directed. | 19 | 2 | Cum |
|---|
| 20 | 20 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils complete all as specified and as directed. | 20 | 10 | Cum |
|---|
| 21 | 21 | Removing excavated soil to a distance n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. | 21 | 32 | Cum |
|---|
| 22 | 22 | M&L for hard core of broken stone or boulders of gauge not exc 63 mm deposited spread and leveled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and as directed. | 22 | 20 | CUM |
|---|
| 23 | 23 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate), as in foundation, filling and mass concreting complete all as specified and as directed. | 23 | 20 | Cum |
|---|
| 24 | 24 | M&L for 200 mm thick, Cement concrete work in concrete road, pavement/hard-standing of cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) complete all as specified and as directed. | 24 | 290 | Sqm |
|---|
| 25 | 25 | Use & waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide for rough finished flat surfaces of concrete as in roads all as specified and directed by Engr in charge. | 25 | 30 | Sqm |
|---|
| 26 | 26 | M&L old size brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed. | 26 | 10 | Cum |
|---|
| 27 | 27 | M&L 15mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and as directed. | 27 | 50 | Sqm |
|---|
| 28 | 28 | M&L for applying three coat of white wash on newly plastered surfaces of walls including necessary preperation etc complete all as specified and as directed. | 28 | 50 | Sqm |
|---|
| 29 | 29 | Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound grade 'A' all as specified and directed by Engr in charge. | 29 | 4 | 10 RM |
|---|
| 30 | 30 | M&L Repairs to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat using bitumen VG-30 grade @ 5 Kg/10 sqm , putting in premixed bituminous macadam ( prepared by mix 56 Kg of binder per cum of dry materials) , using bitumen , well rammed , and sealed with binder using bitumen VG-30 grade @ 9.8 Kg/10 sqm , blinded with 0.09 cu.m. of stone chippings , 6.3 mm size and again well rammed ( including supply of premixed macadam, binder and chippings etc.depth of pot holes exceeding 30 mm all as specified and directed. | 30 | 30 | Xsqm |
|---|
| 31 | 31 | M&L for Moorum /red bajari filling in floors, berms or paving , laid in layers not exc15 cm thick spread , levelled and ramed including watering complete all as specified and directed. | 31 | 90 | Cum |
|---|
| 32 | 32 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc; applying evenly a tack coat with bitumen VG - 30 grade @ 5Kg/10 Sqm and then providing 25mm thick ( min) consoliated thickness bituminous premixed carpet ( Hot mixed in hot mix plant) using 0.3375 cu.m.(min ) of stone chippings mixed with 18.25Kg ( min) of binder using VG-30 grade bitumen per 10 sqm laid hot with mechnical pavers, rolled and compacted to required camber and gradient with 8 to 10 ton power roller; providing premixed sand seal coat with 0.06 cu.m. of sand mixed with 6.8 kg of bitumen per 10 sqm, applied and rolled to a uniform smooth surface complete all as specified and directed.\n\n | 32 | 175 | Xsqm |
|---|
| 33 | 33 | M& of Prepration of new /old surface of road and applying 1.5mm thick refelective resign thermoplastic paint for painting llines, dashes, arrows, letters etc by hot application of approved colours make complete allas specified and directed | 33 | 100 | Sqm |
|---|
| 34 | 34 | Supply and planting of species of following plant of healthy grow up with good roots (hieght of plant shall not be less than 0.60 M) after cleaning of area, digging of pit of size 0.60 x 0.60x0.60M, removal of debris, weeds, roots etc and refilling with good agriculture soil and well decomposed cattle manure in ratio 3:1complete all as specified and directed. \nNote :- The quoted rate shall deemed to be included for carry out of maintenance of plant upto a period of 06 Months from the date of completion of planting of trees. | 34 | | |
|---|
| 35 | 34.1 | Ashoka Tree | 34.1 | 24 | Each |
|---|
| 36 | 34.2 | Areka Plam | 34.2 | 24 | Each |
|---|
| 37 | 34.3 | Sheesham | 34.3 | 24 | Each |
|---|
| 38 | 34.4 | Litchi Plant | 34.4 | 24 | Each |
|---|
| 39 | 34.5 | Gulmohar Plant | 34.5 | 24 | Each |
|---|
| 40 | 34.6 | Drum Stcik | 34.6 | 24 | Each |
|---|
| 41 | 34.7 | Amaltas Plant | 34.7 | 24 | Each |
|---|
| 42 | 34.8 | Mussaenda Plant | 34.8 | 24 | Each |
|---|
| 43 | 34.9 | Poinsettia Plant | 34.9 | 24 | Each |
|---|
| 44 | 35 | Supply and planting of Korean loob grass after cleaning of area, digging up to 30cm depth in any type of soil, removal of debris, weeds, roots etc and refilling with mixture of good agriculture soil and well decomposed cattle manure and sand in ratio 3:1 and treating with anti termite treatment @ 5 Litre per Sqm using Endrin / Chlorpyrifos (EC-20) at plantation time complete all as specified and directed. | 35 | 119 | Sqm |
|---|
| 45 | 36 | S&F tree guard made of mild steel of 80 cm dia and 120 cm height including necessary excavation and earth work, PCC (1:4:8) type D-2 using 40 mm graded stone aggregates complete all as specified and directed. | 36 | 216 | Each |
|---|
| 46 | 37 | M&L for repair to pot holes any depth , not exc 1 sqm each including sweeping free from dust and mud, or water , scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal , watering and well ramming ( including supply of road metal)\n | 37 | 3 | 10 Sqm |
|---|
| 47 | 38 | M&L 150mm thick (7.50 cm thick each layer compacted thickness) Water Bound Maccadam (WBM) with Granite, trap or Basalt , coarse aggregate of grading 2 (63 to 40 mm size) for 1st layer and grading 3 ( 50 mm to 20 mm size) for 2nd layer, spread, rolled and consolidated to gradient and camber required all as specified.( Area of consolidated thickness of 150mm thick shall only be measured as single layer and it will not be measured in two layers) separately. | 38 | 10 | 10 Sqm |
|---|
| 48 | 39 | Preparing unsurfaced water bound macadam top surfces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a tack coat with VG-10 grade bitumen at 10Kg/10 Sqm complete all as specified and directed.\n\n | 39 | 10 | 10 Sqm |
|---|
| 49 | 40 | Preparing Black top surfces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a tack coat with VG-10 grade bitumen at 5Kg/10 Sqm complete all as specified and drected. | 40 | 65 | 10 Sqm |
|---|
| 50 | 41 | M&L Premix bituminous, macadam, laid/ rolled and compacted to required gradient and camber ( consolidated) thickness 75 mm or less using paving bitumen of grade VG-30 as binder @ 4% by weight of total mix using mechanical paver and rolled with 8 to 10 tonne power road roller to a uniform smooth surface completed all as specified and as directed.\nNote :- Mixing shall be done in hot mix plants | 41 | 37 | Cum |
|---|
| 51 | 42 | M&L Bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content by weight of total mix using bitumen of grade VG-30 by mechnical paver, rolled and compacted to required camber and gradient complete all as specified. | 42 | 75 | 10 Sqm |
|---|
| 52 | 43 | M&L for laying hot applied thermoplastic compound (paint) 2.5 mm thick including reflecterising materials glass beads including cost of all materials labour machineries and T&P etc required for proper completion of work including all other charges. The finish surfaces to be level, uniform and free from streaks and holes as per specification No 803 as per IRC painting lines, dashes, arrows and letters etc on roads, pavements and the like not exc 10 cm wide with road marking paint, white or golden yellow all as specified and directed. | 43 | 51 | Sqm |
|---|
| 53 | 44 | Taking down cement plaster on brick/concrete walls etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. | | 1300 | Sqm |
|---|
| 54 | 45 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and smooth without using extra cement complete all as specified and directed.\nNote : (i) Liquid WPC will be measured and paid separately. (ii) Plaster will be executed upto 16 mtr height. | | 1000 | Sqm |
|---|
| 55 | 46 | M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even & smooth without using extra cement Complete all as specifed and directed. Note : (i) Plaster will be executed upto 16 mtr height. | | 200 | Sqm |
|---|
| 56 | 47 | M&L rendering 10 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specifed and directed. | | 100 | Sqm |
|---|
| 57 | 48 | Supply only liquid water proofing compound complete all as specified and as directed. | | 37 | Litre |
|---|
| 58 | 49 | Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. | | 2 | Cum |
|---|
| 59 | 50 | M&L Brickwork with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement and sand mortar 1:4 complete all as specified.\n | | 10 | Sqm |
|---|
| 60 | 51 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. | | 50 | Sqm |
|---|
| 61 | 52 | M&L for water proofing treatment to toilets slabs including wall with a coat of epoxy coating of make Dr Fixit/Pidilite/Phoscok/Sika as per maufacturer's instruction complete all specified and directed. | | 10 | Sqm |
|---|
| 62 | 53 | M&L for non skid coloured ceramic floor tiles 7 to 8 mm thick square/rectangular) (joint free) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15 mm thick screed bed or bedding layer in CM (1:6) complete inclduding water proofing compound @ 3% by weight of cement or as per manufacturer's instructions complete all as specified and directed. | | 25 | Sqm |
|---|
| 63 | 54 | M&L for glazed/Digital coloured ceramic tiles 300x200x6-7 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match with over and including 10 mm thick rendering in CM (1:4) as rough surface on vertical surfaces as backing coat of wall tiles complete all as specified and directed. | | 30 | Sqm |
|---|
| 64 | 55 | M&L 75mm thick PCC 1:3:6 type C-2 using 20mm graded stones aggregate as in plinth protection/ flooring etc finishing even & smooth without using extra cement complete all as spd and directed. | | 25 | Sqm |
|---|
| 65 | 56 | Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 15 mm bore all as specified and directed.\n\n | | 25 | RM |
|---|
| 66 | 57 | Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 20 mm bore all as specified and directed.\n | | 70 | RM |
|---|
| 67 | 58 | Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 25 mm bore all as specified and directed.\n\n | | 50 | RM |
|---|
| 68 | 59 | Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 40 mm bore complete all as specified and directed.\n | | 20 | RM |
|---|
| 69 | 60 | Re-fixing of old steel GI tubing and connections in new or old position with new fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc, fixed to walls and in ceiling or laid in floors etc for 15mm bore complete all as specified and directed. | | 5 | RM |
|---|
| 70 | 61 | Re-fixing of old steel GI tubing and connections in new or old position with new fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc, fixed to walls and in ceiling or laid in floors etc for 20mm bore complete all as specified and directed. | | 5 | RM |
|---|
| 71 | 62 | Re-fixing of old steel GI tubing and connections in new or old position with new fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc, fixed to walls and in ceiling or laid in floors etc for 25mm bore complete all as specified and directed. | | 5 | RM |
|---|
| 72 | 63 | Re-fixing of old steel GI tubing and connections in new or old position with new fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc, fixed to walls and in ceiling or laid in floors etc for 40mm bore complete all as specified and directed. | | 2 | RM |
|---|
| 73 | 64 | S&F GI steel tubes, medium grade galvanised with all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc, fixed to walls and in ceiling or laid in floors etc for 15mm bore complete all as specified and directed. | | 20 | RM |
|---|
| 74 | 65 | S&F GI steel tubes, medium grade galvanised with all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc, fixed to walls and in ceiling or laid in floors etc for 20mm bore complete all as specified and directed. | | 65 | RM |
|---|
| 75 | 66 | S&F GI steel tubes, medium grade galvanised with all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc, fixed to walls and in ceiling or laid in floors etc for 25mm bore complete all as specified and directed. | | 45 | RM |
|---|
| 76 | 67 | S&F GI steel tubes, medium grade galvanised with all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc, fixed to walls and in ceiling or laid in floors etc for 40mm bore complete all as specified and directed. | | 18 | RM |
|---|
| 77 | 68 | S&F in repair stop valve of cast copper alloy, screwed down, high pressure with crutch handle, cast or forged variety opening full way, screwed both ends for galvanised iron pipe or to suit the unions and fixed for 20mm bore complete all as specified and directed. | | 8 | Each |
|---|
| 78 | 69 | S&F in repair stop valve of cast copper alloy, screwed down, high pressure with crutch handle, cast or forged variety opening full way, screwed both ends for galvanised iron pipe or to suit the unions and fixed for 25mm bore complete all as specified and directed. | | 8 | Each |
|---|
| 79 | 70 | Cutting chases, pining in, making good to facing where required and pointing in cement mortar 1:3 to sun shed, shelves, lintels, concealed water tubing etc and making good, cutting not exc 10 cm girth in brick/stone or concrete wall complete all as specified and as directed. | | 50 | RM |
|---|
| 80 | 71 | Demolition of reinforced Cement Concrete of any description and in any position not otherwise specifically provided for cement water tank old pattern and stagging and removing exceeding 1.5 KM from NCC/CDA location complete all as directed by Engr-in-Charge. | | 4 | Cum |
|---|
| 81 | 72 | S&F in repairs Rotational moulded polyethylene multilayers water storage tanks 1000 Ltr capacity (cylin-drical vertical with closed top) hoisted and fixed in position including 20mm dia float valve of cast brass complete all as specified in SSR Part I including dismantling the existing complete all as specified and directed. | | 4 | Each |
|---|
| 82 | 73 | M&L Providing reinforced cement concrete type B1 1:2:4 (20 mm graded stone aggregates) in Door or window lintel, lintel bends/plinth bend incl necessary formwork complete all as specified and as directed. | | 0.5 | Cum |
|---|
| 83 | 74 | M&L Mild steel deformed or twisted bars ( TMT) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.\n | | 100 | Kg |
|---|
| 84 | 75 | M&L Mild steel bars ( TMT deformed/twisted) 8mm dia. and over up to and including 10 mm dia. in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified. | | 25 | Kg |
|---|
| 85 | 76 | Taking down PVC/ AC rain water / vent / waste pipes including all fittings of any dia complete all as specified and directed. | | 100 | RM |
|---|
| 86 | 77 | S&F 110mm bore PVC (SWR) pipes single socket in any length with carefully prepare rubber ring joints (or solvent joint) fixed to walls, ceiling or laid in floor compound complete all as specified and directed. | | 80 | RM |
|---|
| 87 | 78 | S&F 75 mm bore PVC (SWR) pipes single socket in any length with carefully prepare rubber ring joints (or solvent joint) fixed to walls, ceiling or laid in floor compound complete all as specified and directed. | | 20 | RM |
|---|
| 88 | 79 | S&F 75 mm dia of PVC (SWR) multi floor trap plain including jointing with solvent cement of outlet complete all as specified and directed. | | 2 | Each |
|---|
| 89 | 80 | S&F 75 mm dia of PVC floor trap plain including jointing with solvent cement of outlet complete all as specified and directed. | | 2 | Each |
|---|
| 90 | 81 | PVC (SWR) bends any radius ,dia of bore 110 mm complete all as specified and directed. | | 2 | Each |
|---|
| 91 | 82 | PVC (SWR) bends any radius ,dia of bore 75 mm complete all as specified and directed . | | 2 | Each |
|---|
| 92 | 83 | S& F PVC(SWR) jnctions single(SingleT) equal or unequal, dia of bore 110 mm complete all as specified and directed . | | 2 | Each |
|---|
| 93 | 84 | PVC (SWR) 'P'/ `S trap bore 110mm/100mm complete all as specified and directed . | | 2 | Each |
|---|
| 94 | 85 | S&F 100 mm CI vent cowl complete all as specified and directed. | | 2 | Each |
|---|
| 95 | 86 | M&L mild steel Bands, straps, supports or stays for rainwater , fan clamps Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and pintol hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified and directed. | | 10 | Kg |
|---|
| 96 | 87 | Taking down chowkat or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and directed. | | 15 | Each |
|---|
| 97 | 88 | S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate complete all as specified. | | 50 | RM |
|---|
| 98 | 89 | S&F flush shutter, 35 mm thick, solid core construction with block board core, and ply wood face panels but both face is covered with decorative laminate face veneer of Make : Century Plywood/Kit Ply with teak wood lipping complete all as specified. | | 20 | Sqm |
|---|
| 99 | 90 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. | | 25 | RM |
|---|
| 100 | 91 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS fram welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. | | 8 | Sqm |
|---|
| 101 | 92 | S&F 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed. | | 30 | Each |
|---|
| 102 | 93 | S&F Butt Hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C22, 100 mm long complete all as specified and directed. | | 15 | Each |
|---|
| 103 | 94 | S&F for 200 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed. | | 30 | Each |
|---|
| 104 | 95 | S&F 150 mm long anodised aluminium handles, cast type complete all as specified and directed. | | 30 | Each |
|---|
| 105 | 96 | S&F 250 mm long, aluminium alloy, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast for extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. | | 10 | Each |
|---|
| 106 | 97 | S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as directed \n | | 10 | Each |
|---|
| 107 | 98 | S&F Aluminium (Die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for shutter of 851 to 1000mm in width and of weight between 61 to 80 kg fixed complete all as directed. | | 4 | Each |
|---|
| 108 | 99 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane with hacking out old broken glass (any thickness, size, or description) from wooden / steel frames complete all as specified and as directed. | | 10 | Sqm |
|---|
| 109 | 100 | S&F 4 mm thick sheet glass figured glass pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm in each pane with Hacking out old Brocken glass (any thickness, size, or description) from wooden/steel frames complete all as specified and as directed. | | 5 | Sqm |
|---|
| 110 | 101 | S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed. | | 10 | Sqm |
|---|
| 111 | 102 | M&L for preparation of old decorated plastered/unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, and efflorescent salts and trading oil and greasy spots and applying one coat of white washing complete all as specified and as directed. | | 200 | Sqm |
|---|
| 112 | 103 | M&L for preparation of old decorated plastered/unplastered surfaces of ceilings by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, and efflorescent salts and trading oil and greasy spots and applying one coat of white washing complete all as specified and as directed. | | 200 | Sqm |
|---|
| 113 | 104 | M&L for preparation of old decorted plastered/unplastered surfaces of walls of any description by washing, rubbing down and stopping of distemper and painted surfaces and applying one coat of Oil Bound distemper, white or tinned complete all as specified and directed. | | 500 | Sqm |
|---|
| 114 | 105 | M&L for preparation of old decorated plastered/unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, and efflorescent salts and trading oil and greasy spots and applying two coats of distemper oil emulsion, white or tinned (change of colour as required) complete all as specified and directed. | | 400 | Sqm |
|---|
| 115 | 106 | M&L for preparation of scrapped surfaces of walls of any description by washing, rubbing down and applying 3mm one coat of birla/ JK wall care putty complete as specified and directed. | | 200 | Sqm |
|---|
| 116 | 107 | M&L for preparation of old decorated plastered/ unplastered surfaces of walls of any description by washing, rubbing down and applying one coat of cement base paint complete as specified and directed. | | 500 | Sqm |
|---|
| 117 | 108 | M&L for preparation of old scrapped surfaces of walls of any description by washing, rubbing down and applying two coats of cement base paint complete as specified and directed. | | 200 | Sqm |
|---|
| 118 | 109 | M&L for preparation of old decorated plastered/ unplastered surfaces of external walls of any description by washing, rubbing down and applying one coat of apex paint (weather coat) complete as specified and directed. | | 1000 | Sqm |
|---|
| 119 | 110 | M&L for new plastered surfaces of external walls of any description by including one coat primer and applying one coat of apex paint (weather coat) complete as specified and directed. | | 1200 | Sqm |
|---|
| 120 | 111 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of scaled paint and applying one coats of synthetic enamel paint complete all as specified and as directed. | | 50 | Sqm |
|---|
| 121 | 112 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. | | 20 | Sqm |
|---|
| 122 | 113 | Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.. | | 60 | Sqm |
|---|
| 123 | 114 | M&L French polishing on surface of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with or more coats complete all as directed. | | 60 | Sqm |
|---|
| 124 | 115 | M&L French polishing on surface of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with or more coats complete all as directed. | | 100 | Sqm |
|---|
| 125 | 116 | S&F anodized aluminium ventilator fixed type with frames aluminium section size 63X38X1.20mm thick including fly proofing standard rubber gasket locking arrangements aluminium beadings & joining cleats for fixing including 5.5 mm thick tinted glass complete all as specified and directed. | | 10 | Sqm |
|---|
| 126 | 117 | Demolition of existing treatment of roof / parapet wall , Mud phuska on roof / parapet including plastering, brick tiles, stone slabs and leaping any thickness and removing rubbish off premises of MOD land not exc 500 complete all as specified and as directed. | | 2 | Cum |
|---|
| 127 | 118 | M & L average thickness 25mm for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate), as in padding / levelling course for maintain to proper slope of roof including necessary form work as required complete all as specified and directed.\n | | 25 | Sqm |
|---|
| 128 | 119 | M&L for 15 mm thick screed bed in CM 1:4 with water proofing compound @ 200ml /50kg of cement or as per manufacturer's instruction, finished surface even and smooth with out using extra cement including taking down of complete existing cement plaster etc complete all as specified.\n(Note : WPC will be measured & paid for separately). | | 25 | Sqm |
|---|
| 129 | 120 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :-\n(i) Properly cleaning and drying concrete surfaces.\n(ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm.\n(iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm.\n(iv) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction.\n(v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.\n | | 25 | Sqm |
|---|
| 130 | 121 | M & L for (reebaklens solution) to exposed corroded reinforcement @ 0.20 ltr/Sqm of exposed reinforcement bars/structural members surfaces at any height including necessary scaffolding , complete all as per manufacturer’s instructions and all as specified and directed. | | 227 | Sqm |
|---|
| 131 | 122 | M&L for Applying minimum 40 micron thick (dry film thickness) coat of epoxy zinc rich primer (Nitozink primer of M/S Fosroc chemicals (India) Pvt ltd/M/S pidilite/M/S Choksey chemicals @ not less than 0.25 litre per sqm of exposed steel reinforcement at any height including necessary scaffolding ,complete all as per manufacturer's instructions and all as specified and directed. | | 615 | Sqm |
|---|
| 132 | 123 | M&L providing & fixing at any height including scaffolding,welded mild steel wire mesh weight not less than 1.5 Kg per Sqm primed with Nito zink primer & applying 40mm average thick cement mortar in the ratio 1:4 mixed with liquid intergral water proofing compound (conplast 'X' 421 & Nitobond AR manufactured by M/S Fosroc/M/S pidilite/M/S Choksey chemicals , in ratio as per recommendation of manufactures total chemical not less than 5% by weight of cement with guniting machine/shot gun at a pressure not less than 5 Kg/ Sqcm, including necessary scaffolding complete all as per manufacturer’s instructions and all as specified and directed.\nNote for item No 121 to 123 :- The work shall be carried out at 16 M height and all arrangement including necessary scaffolding etc shall deemed to be included in the quoted rates. | | 615 | Sqm |
|---|
