Military Engineer Services-MES has published Repair To Flooring , Plastering And Certain Others Works Of Ota At Mil Stn Gaya. Submission Date for this Tender is 18-05-2020. Civil Work Tenders in Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar Bihar. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-May-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-05-2020 |
| Name of Work:Repair to flooring, plastering and certain others works of OTA at Mil Stn Gaya | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. | 2 | Cum | |
| 2 | 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. | 4 | Cum | |
| 3 | 3 | M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. | 1.5 | Cum | |
| 4 | 4 | M&L Brick work except Bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. | 0.5 | Cum | |
| 5 | 5 | Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. | 500 | Sqm | |
| 6 | 6 | M&L Rendering 10mm thick in ceiling on brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and directed. | 100 | Sqm | |
| 7 | 7 | M&L Rendering 10mm thick internal surfaces on other than fair faces of brick work in cm 1:6 as directed by Engr-in-charge. | 100 | Sqm | |
| 8 | 8 | M&L Rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement. Note:-WPC shall be measured and paid separaetly. | 300 | Sqm | |
| 9 | 9 | M & L for repair & rehabilitation of existing old damaged concrete surfaces of wall/ceiling of any description as follows :- \n(i) Chipped off the old damaged surfaces of structural member of wall/ceiling/columns /beams and remove the rust by passivating rust remover (Sika Rust off-100) and applying one coat of anti corrossive treatment by Zinc rich primer (Friazinc-R) (ii) application of two coat of Sika slurry coating/Bond coat on surfaces with mixer of Sika Latex power : Water : cement in the ratio of 1:4:8 as per manufacturer instruction. (iii) Repair the surfaces by Polymer mortar in ratio of Cement and Sand 1:4 and mixer of Sika latex power diluted in water with raio of Sika latex power : water is 1:6 complete as per manufacturer instruction and making surfaces even and smooth without using extra cement complete all as specified. Note : (i) Work will be carried out in patches. Make : Sika or equivalent\n | 200 | Sqm | |
| 10 | 10 | M & L Application of epoxy bonding primer for old to new concrete bonding (Sikadur-32 LP) as per manufacturer instruction complete all as specified and directed. Make : Sika or equivalent | 12 | Kg | |
| 11 | 11 | Supply only liquid water proofing compound ISI marked. | 1 | Ltr | |
| 12 | 12 | M&L Applying 0.25mm thick wall care putty incl preparation of newly plastered wall/ceiling surfaces | 400 | Sqm | |
| 13 | 13 | M&L Applying two coats of acrylic distemper over a coat of primer incl preparation of newly plastered wall surfaces. | 300 | Sqm | |
| 14 | 14 | M&L Applying two coats of acrylic distemper over a coat of primer incl preparation of newly plastered surfaces as in ceiling. | 100 | Sqm | |
| 15 | 15 | M&L 2 coats cement base paint including preparation of newly plastered wall surfaces complete | 300 | Sqm | |
| 16 | 16 | Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level) | 1.7 | Cum | |
| 17 | 17 | M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 40 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. | 30 | Sqm | |
| 18 | 18 | M & L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), 25 mm thick in flooring etc complete all specified and as directed | 20 | Sqm | |
| 19 | 19 | S & F Chicken wire mesh made out of low carbon wire 0.30mm thick, annealed, mesh size (dist between the faces of hexagon) 12 mm complete all as specified and directed. | 40 | Sqm | |
| 20 | 20 | S& F PVC ( SWR ) nahani trap / floor trap 75 mm dia all as specified and as directed. Make - Reliance, finolex, supreme, kisan, prince | 10 | Each | |
| 21 | 21 | M&L Granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified and as directed | 5 | Sqm | |
| 22 | 22 | M&L Dismantling floor tiles 10 mm size hearth or wall tiles including cement mortar bedding without breaking the tile and removing mortar (but not backing) and refixing in same or other place as per requirement over 15 mm thick screed bed or bedding in CM 1 : 6 | 50 | Sqm | |
| 23 | 23 | M&L Cleaning and racking out the joint filling of floor or wall tiles and refilling the same with white or coloured cement to match the colour | 400 | Sqm | |
| 24 | 24 | M&L Coloured Non Skid ceramic coloured jointless tiles (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6.including taking down existing tiles. \n(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) | 50 | Sqm | |
| 25 | 25 | M&L Non skid ceramic coloured tiles 10 mm thick ( square or rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed with and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:4 incl taking down existing tiles complete all as specified and as directed.\n(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) | 350 | Sqm | |
| 26 | 26 | M & L Coloured digital Glazed ceramic coloured tiles in vertical surfaces area of each tiles not exceeding 0.16 sqm x 7-8 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:4 as backing for tiles including taking down old tiles complete all as specified and as directed. \n(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) | 180 | Sqm | |
| 27 | 27 | M&L Vitrified tiles double charge light shed 10 mm thick ( square or rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed with and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:4 including taking down existing tiles complete.\n(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) | 20 | Sqm | |
| 28 | 28 | M & L Machine cut Kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6.\n(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) | 150 | Sqm | |
| 29 | 29 | M & L Kota stone slab 18-22 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and incl 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete.\n(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) | 20 | Sqm | |
| 30 | 30 | S & F Framed work such as grills, gratings, etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and as directed | 150 | Kg | |
| 31 | 31 | M & L Two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces. | 30 | Sqm | |
| 32 | 32 | Cutting holes into or through brick walls built in cement mortar superficial area exc 150Sqcm but not exc 400 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required. | 25 | per cm depth of cutting | |
| 33 | 33 | M & L TMT bars 8 mm dia & over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete | 100 | Kg | |
| 34 | 34 | M&L RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) in slabs, cantilever or supported on walls and small works like cubes etc. | 0.5 | Cum | |
| 35 | 35 | Dismantling of wall and ceiling boards, any thickness including cover fillets complete. | 50 | Sqm | |
| 36 | 36 | S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete. | 50 | Sqm | |
| 37 | 37 | S&F in repairs of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system all as specified and directed by the Engineer-in-Charge. Make Everest/Armstrong | 200 | Sqm | |
| 38 | 38 | M&L Preparation and filling of pitting/cracks (including V groove cutting of cracks/deepening) on surfaces with crack seal and finishing the surfaces as per existing treatment complete all as specified and directed. Make : Sika/Asian Paint/Dr Fixit/Pidilite | 500 | RM | |
| 39 | 39 | Taking down existing aluminium door shutter with frame area exceeding 1 Sqm and re-fixing in same opening after repair/replace the defective jointing cleats/screws all as per specified and directed by Engr-in-Charge. | 100 | Each Job | |
| 40 | 40 | S & F Taper clips, tee, angles and other items for aluminium door complete. | 20 | Kg | |
| 41 | 41 | S & F Rubber gasket for aluminium door glass complete | 500 | RM | |
| 42 | 42 | M & L 25 mm thick Providing precast cement concrete 1:2:4 type B-0 as in louvres and jallies (measured solid), including all mouldings and set in cement mortar 1:4 | 25 | Sqm | |
| 43 | 43 | Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame). | 10 | Each | |
| 44 | 44 | S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. \nNote : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. | 180 | Kg | |
| 45 | 45 | Supply only Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete. | 12 | Sqm | |
| 46 | 46 | Supply only 3 mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane | 12 | Sqm | |
| 47 | 47 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete. | 90 | RM | |
| 48 | 48 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed | 50 | RM | |
| 49 | 49 | S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. | 3 | Each | |
| 50 | 50 | S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed. | 10 | Each | |
| 51 | 51 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed | 2 | Each | |
| 52 | 52 | S&F PVC (SWR) vent cowl for 110 mm bore pipe | 8 | Each | |
| 53 | 53 | S&F PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement | 10 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
