| 1 | 1 | Note 1: (Applicable for all parts/items) : The bidders/ contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates.\nNote 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender. | | | |
|---|
| 2 | 2 | PART-I (WOODEN FURNITURE) | | | |
|---|
| 3 | 2.01 | Manufacture and supply of Table Centre (Drawing No:FD-274) complete all as specified and shown in drawing. | | 3 | Each |
|---|
| 4 | 2.02 | Manufacture and supply of Peg Table (Drawing No:FD-277) complete all as specified and shown in drawing. | | 5 | Each |
|---|
| 5 | 2.03 | Manufacture and supply of Notice Board 6'x3'(Drawing No:HA/F/14) complete all as specified and shown in drawing. | | 2 | Each |
|---|
| 6 | 2.04 | Manufacture and supply of Notice Board 5'x4'(Drawing No:DB-10182) complete all as specified and shown in drawing. | | 2 | Each |
|---|
| 7 | 2.05 | Manufacture and supply of Bed Plywood top with MNF set (Drawing No:FD-246) complete all as specified and shown in drawing. | | 2 | Each |
|---|
| 8 | 2.06 | Manufacture and supply of Hat stand with mirror (Drawing No:FD-233) complete all as specified and shown in drawing. | | 1 | Each |
|---|
| 9 | 2.07 | Manufacture and supply of Sofa Set 4 single seater with cushion (Drawing No:FD-373) complete all as specified and shown in drawing. | | 1 | Each Set |
|---|
| 10 | 2.08 | Manufacture and supply of Sofa set 5 seater (3+1+1) with cushion (Drawing No:FD-373) complete all as specified and shown in drawing. | | 3 | Each Set |
|---|
| 11 | 2.09 | Manufacture and supply of Chair writing (Drawing No:FD-280) complete all as specified and shown in drawing. | | 142 | Each |
|---|
| 12 | 2.1 | Manufacture and supply of Chair wooden bottom (Drawing No:FD-285) complete all as specified and shown in drawing. | | 8 | Each |
|---|
| 13 | 2.11 | Manufacture and supply of Table 600mmx600mm (Drawing No:FD-95) complete all as specified and shown in drawing. | | 6 | Each |
|---|
| 14 | 2.12 | Manufacture and supply of Chair Dining (Drawing No:FD/MAP-II/05) complete all as specified and shown in drawing. | | 8 | Each |
|---|
| 15 | 3 | PART-II (STEEL FURNITURE) | | | |
|---|
| 16 | 3.01 | Manufacture and supply of Table office officers steel (Drawing No: FD1002) complete all as specified and shown in drawing. | | 2 | Each |
|---|
| 17 | 3.02 | Manufacture and supply of Table Office Clerk steel (Drawing No: FD1004) complete all as specified and shown in drawing | | 15 | Each |
|---|
| 18 | 3.03 | Manufacture and supply of Chair CB Office steel with arms (Drawing No: FD75M) complete all as specified and shown in drawing | | 4 | Each |
|---|
| 19 | 3.04 | Manufacture and supply of Steel locker with shelves (Drawing No: FD1029) complete all as specified and shown in drawing | | 106 | Each |
|---|
| 20 | 3.05 | Manufacture and supply of Rack Pigeon Steel (Drawing No: FD-1037) complete all as specified and shown in drawing. | | 1 | Each |
|---|
| 21 | 3.06 | Manufacture and supply of Almirah Large Steel with shelves (Drawing No:1031) complete all as specified and shown in drawing. | | 8 | Each |
|---|
| 22 | 3.07 | Manufacture and supply of Book Case steel (Drawing No:FD-1028) complete all as specified and shown in drawing. | | 5 | Each |
|---|
| 23 | 3.08 | Manufacture and supply of Almirah Med steel with shelves (Drawing No:FD-1032) complete all as specified and shown in drawing. | | 4 | Each |
|---|
| 24 | 3.09 | Manufacture and supply of Chair Writing (Drawing No: FD-E6/MAP/12) complete all as specified and shown in drawing | | 10 | Each |
|---|
| 25 | 3.1 | Manufacture and supply of Charpoy IP Hard Top (Drawing No: FD/MAP-II/01) complete all as specified and shown in drawing | | 244 | Each |
|---|
| 26 | 3.11 | Manufacture and supply of Side Rack with spaces (Drawing No: FD-1023) complete all as specified and shown in drawing. | | 1 | Each |
|---|
| 27 | 3.12 | Manufacture and supply of Table steel 900mmx600 without drawer (Drawing No:FD-1007) complete all as specified and shown in drawing. | | 13 | Each |
|---|
| 28 | 4 | PART-III (TRADE PATTERN FURNITURE) | | | |
|---|
| 29 | 4.01 | Tambour Door Unit (Storage Unit), of Make : Godrej having dimension of 1169HX900W x 4700. Model: Code STTDUKB2S0203. | | 3 | Each |
|---|
| 30 | 4.02 | Chair revolving (High Back) of Make:Godrej, Model : KAREENA of Code:FU9P01AX13RSXXXX, | | 10 | Each |
|---|
| 31 | 4.03 | Locker single column 6 doors of Make:Featherlite, Model SE-106. | | 4 | Each |
|---|
| 32 | 4.04 | Chair Cushion seat and back. Make:Godrej, Model:Task Chair of Code-FU41031XV01SXXXX. | | 15 | Each |
|---|
| 33 | 4.05 | Table Computer. Make : Godrej, Model : STYLO, of Code FUSTLWTXXBCHXXDT | | 8 | Each |
|---|
| 34 | 4.06 | Chair computer Make: Godrej, Model: Diva, of Baan Code-FU7042RXV01SXXXX | | 8 | Each |
|---|
| 35 | 4.07 | Chair Revolving Mid back. Model : PREMIER, Make: Godrej. (Item Code :FU7102RXV01SXXXX) | | 2 | Each |
|---|
| 36 | 4.08 | Chair Mid back W/o seat slide (Pool side chair). Make: Godrej, Model : BEAT (Item Code :FUBT02AXK05SXXEN). | | 20 | Each |
|---|
| 37 | 4.09 | Personal locker Unit 06-Door Make: Godrej, (Item Code :STVLU6LB201) | | 7 | Each |
|---|
| 38 | 4.1 | Rostrum (Podium) having dimension of 1200mm H x 500mm W x 410mm D. Make:Methodex | | 1 | Each |
|---|
| 39 | 4.11 | Pin up soft Display Board of size 900mm x 600mm with standard aluminium frame as approved | | 2 | Each |
|---|
