Incubator Lab Technical Specifications As Mentioned In The Description-Uttar Pradesh

Supply Of , Incubator Lab Technical Specifications 1. Should Be Operated On 230V,50Hz Single Phase Ac Supply, And Having Temperature Ranging From Ambient To 60%Bac 2. Should Be Double Walled With Stainless Steel Inner Chamber Having A Minimum Of Two Inner Stainless Steel Shelves With Holes And Powder Coated Outer Surface. 3. Inner Chamber Should Be Fabricated With Ribs For Adjusting Shelves To Convenient Height. 4. Should Have A Minimum Of Chamber Size Of (L*B*H) Of 450*450*450Mm. 5. Should Be Provided With Three Side Heating Elements. 6. Should Have Air Circulating Fan (Which Can Be Turn On/Off On Demand) For Uniform Temperature On All Shelves. 7. Should Have Double Door With Acrylic Transparent Door. 8. Should Provide With A Microprocessor Based Digital Temperature Controller With Digital Display. 9. Should Have Synthetic Rubber Gasket At The Door. 10. Warranty Warranted For 2 Years After Satisfactory Installation And Working Excluding Consumable Parts And Accessories. 11. Comprehensive Maintenance: Comprehensive Maintenance Of The Equipment Supplied, Installed, Commissioned For 60 Months After 2 Year Warranty/Defects Liability Period. This Will Include Yearly Calibration Start-Up / Commissioning Routine Servicing, Regular Maintenance, Preventive Maintenance Of Equipment And Components And Break Down Repairs As And When Occurring, Ensuring That System Does Not Remain Out Of Service For A Period More Than 24 Hours In Case Of Major Breakdowns And 6-8 Hour In The Case Of Minor Breakdowns Due To Any Unforeseen Break Down. The Institution Will Provide Water / Electricity Power, Etc. For Maintenance Work. The Successful Tenderer Shall Keep The Essential Spares At Site During The Contract Period To Avoid The Delay In Attending Faults / Maintenance. 12. Supplier/ Manufacturer : Must Be Iso Certified For Quality. 13. Certificates Performance And Safety Standards (Specific To The Device Type);Local And/Or International: %U2022 Should Be Fda/Ce/Bis Approved Product. %U2022 Manufacturer And Supplier Should Have Iso 13485 Certification Under Iso 9001For Quality Standards. %U2022 Electrical Safety Conforms To The Standards For Electrical Safety Iec 60601- General Requirements(Or Equivalent Bis Standard) %U2022 Certified To Be Compliant With Iec 61010-1, Iec 61010-2-40 For Safety 14. Conformity To Standards: Ce Certificate

Refer document

Refer document

Refer document