Sales : +91-777 804 8217
| Name of Work: AUGMENTATION OF WATER SUPPLY INSTALLATION FOR TURIAL WATER POINT AT AIZWAL MILITARY STATION. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good disturbed surface in soft / loose soil complete all as specified and as directed. | 7 | Each | |
| 2 | 2 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed. | 294 | Sqm | |
| 3 | 3 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil etc complete all as specified and as directed. | 27.8 | Cum | |
| 4 | 4 | Ditto- all as per item No 3.00 above but for depth exc 1.5m and n exc 3.00m and -ditto | 5.4 | Cum | |
| 5 | 5 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and as directed. | 212 | Cum | |
| 6 | 6 | Returning, filling in, of soft/loose soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed . | 80.9 | Cum | |
| 7 | 7 | Removing excavated soil to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed . | 164.3 | Cum | |
| 8 | 8 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed. | 130.5 | Sqm | |
| 9 | 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and segregating serviceable materials and keeping for reuse at site and removing unserviceable materials from site of work complete all as specified and as directed. | 19.89 | Qtl | |
| 10 | 10 | Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. | 26.3 | Sqm | |
| 11 | 11 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc.15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. | 33.29 | Cum | |
| 12 | 12 | Demolition of cement concrete (reinforced) of any description and any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of rubbish from the site complete all as specified and as directed. | 10.7 | Cum | |
| 13 | 13 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. | 41.48 | Cum | |
| 14 | 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. | 21.74 | Sqm | |
| 15 | 15 | Taking down wooden chowkats or frames with shutters exc. 1.50 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed. | 4 | Each | |
| 16 | 16 | Taking down wooden chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking of shutters from the frames) complete all as specified and as directed. | 10 | Each | |
| 17 | 17 | Material and labour for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed. | 51.1 | Cum | |
| 18 | 18 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to 23cm thickness complete all as specified and as directed. | 14 | Cum | |
| 19 | 19 | Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed. | 1200 | Each | |
| 20 | 20 | Material and labour for hand packing (any thickness) at back of walls over arches etc. with broken stones or boulders and raising\n(or lowering) to the required level complete all as specified and as directed. | 22 | Cum | |
| 21 | 21 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. | 4.5 | Cum | |
| 22 | 22 | Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. | 36.8 | Cum | |
| 23 | 23 | Material and labour for PCC (1:2:4) type B2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. | 11.75 | Cum | |
| 24 | 24 | Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed. | 1.6 | Cum | |
| 25 | 25 | Material and labour for PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed. | 2.15 | Cum | |
| 26 | 26 | Material and labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and\nthroating including necessary use and waste of formwork complete all as specified and as directed. | 2.8 | Cum | |
| 27 | 27 | Material and labour for PCC 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in coping, kneelers, kerbs, bed blocks, hold fast block, or chamfered angles and throating and the like including necessary use and waste of formwork complete all as specified and as directed. | 0.65 | Cum | |
| 28 | 28 | Material and labour for precast cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in bonders (for stone walling) and set in cement mortar (1:6) and including necessary forwork etc complete all as specified and as directed. | 4.75 | Cum | |
| 29 | 29 | Material and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. | 5.1 | Cum | |
| 30 | 30 | Material and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts concrete complete all as specified and as directed. | 2.2 | Cum | |
| 31 | 31 | Material and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. | 1.2 | Cum | |
| 32 | 32 | Material and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. | 1.5 | Cum | |
| 33 | 33 | Material and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in Chajjas complete all as specified and as directed. | 0.7 | Cum | |
| 34 | 34 | Material and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters and buttresses complete all as specified and as directed. | 6.8 | Cum | |
| 35 | 35 | Material and labour for 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub-base of floor finished the surface even and fair complete all as specified and as directed. | 400 | Sqm | |
| 36 | 36 | Material and labour for 100mm thick PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in sub-base of paths and pavements finished the surface even and fair complete all as specified and as directed. | 20 | Sqm | |
| 37 | 37 | Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc and finished the surface even and smooth without using extra cement complete all as specified and as directed. | 35.8 | Sqm | |
| 38 | 38 | Material and labour for 150mm thick PCC 1:2:4 type B2, (using 40mm graded aggregate) as in floor and finish the surface fair and even complete all as specified and as directed. | 400 | Sqm | |
| 39 | 39 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred /stopped ends etc complete all as specified and as directed. | 115 | RM | |
| 40 | 40 | Supply only integral water proofing compound (WPC) of best quality complete all as specified and as directed.\n | 48.5 | Kg | |
| 41 | 41 | Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade ‘A’, for 100mm thickness of concrete slab complete all as specified and directed. | 22 | 10 RM | |
| 42 | 42 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. | 34.1 | Cum | |
| 43 | 43 | Materials and labour for half brick thick brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed. | 184.1 | Sqm | |
| 44 | 44 | M & L for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6 )complete all as specified and as directed. | 124 | Cum | |
| 45 | 45 | M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surfaces of concrete, flat complete all as specified and as directed. | 46.8 | Sqm | |
| 46 | 46 | M & L for use and waste of form work to sides of pillars, posts, struts, piers, piers, columns and stanchions of square, rectangular or polygonal shape with rough finished surfaces of concrete complete all as specified and as directed. | 39.5 | Sqm | |
| 47 | 47 | M & L for use and waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work, etc. not exceeding 200mm thick with rough finished surfaces of concrete flat complete all as specified and as directed. | 22.5 | Sqm | |
| 48 | 48 | M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges with rough finished surfaces of concrete flat complete all as specified and as directed. | 12.6 | Sqm | |
| 49 | 49 | M & L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc with rough finished surfaces of concrete flat complete all as specified and as directed. | 21.5 | Sqm | |
| 50 | 50 | M & L for use and waste of formwork to faces of walls,retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter with rough finished surfaces of concrete flat complete all as specified and as directed. | 58 | Sqm | |
| 51 | 51 | M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide with rough finished surfaces of concrete complete all as specified and as directed. | 582 | RM | |
| 52 | 52 | Supply and fixing for 35mm thick second class hardwood plain framed panelled shutters (any numbers of panels) with panels of timber flat both sides (feather edged) or of veneered particle board medium dencity, wood particle with commercial face veneers supplied and fitted to chowkats complete all as specified and as directed. | 8.5 | Sqm | |
| 53 | 53 | Supply and fix 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Sec-tion 8, clause 8.24 (a) complete all as specified and as directed. | 8.5 | Sqm | |
| 54 | 54 | Ditto all as per serial item No. 53.00 above but 30mm thick windows, ventilators, etc. provided with stiles and rails as specified in SSR Part-I section 8 clause 8.24(b) complete all as specified and as directed. | 29.5 | Sqm | |
| 55 | 55 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.\n | 4.8 | RM | |
| 56 | 56 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded decorative coloured laminates PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and decorative coloured laminates PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of decorative coloured laminates PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC laminated sheet beeding, and joined together with solvent cement, supplying and fixing in the frame at the site as per specification complete all as specified and as directed.\n | 1.6 | Sqm | |
| 57 | 57 | Supply and fixing 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed. | 3 | Each | |
| 58 | 58 | Supply and fixing aluminium anodized, barrel tower bolts, 200mm long of extruded section complete all as specified and as directed. | 24 | Each | |
| 59 | 59 | Supply and fixing aluminium anodized, barrel tower bolts, 150mm long of extruded section complete all as specified and as directed. | 80 | Each | |
| 60 | 60 | Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. | 64 | Each | |
| 61 | 61 | Supply & fixing as in replacement floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and as directed. | 3 | Each | |
| 62 | 62 | Supply and fixing for 300mm long mild steel ordinary rat tail rod pattern springs for doors including roller and roller plate complete all as specified and as directed. | 3 | Each | |
| 63 | 63 | Supply and fixing 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts,of extruded sections or cast aluminium alloy complete all as specified and as directed. | 3 | Each | |
| 64 | 64 | Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and as directed. | 13.8 | Sqm | |
| 65 | 65 | Supply and fixing wire netting of galvanised steel wire 0.91mm dia fixed with tinned tacks of wire staples complete all as specified and as directed. | 15 | Sqm | |
| 66 | 66 | Supply and fixing 19/20mm dia mild steel chromium plated curtain rods with and including fixing socket complete all as specified and as directed. | 12 | RM | |
| 67 | 67 | Supply and fix 105x60mm size pressed steel, frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc, complete all as specified and as directed. | 62.5 | RM | |
| 68 | 68 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. | 1025 | Kg | |
| 69 | 69 | Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. | 375 | Kg | |
| 70 | 70 | M & L for Mild steel TMT bars 5mm dia. and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. | 310 | Kg | |
| 71 | 71 | S & F mild steel framed work such as grills, gratings etc. with ornamental and intricate design for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. conforming to Fe-290 Gde E-165 complete all as specified and directed. | 315 | Kg | |
| 72 | 72 | Supply and fixing Rolled mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410-W (Gde-E- 250) quality- A etc complete all as specified and as directed . | 40 | Kg | |
| 73 | 73 | Supply and fixing steel work in tubular trusses i.e truss bottom, top bend, sides, side supports, holding plates, posts and base plate etc. including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 etc complete all as specified and as directed . | 675 | Kg | |
| 74 | 74 | Supply and fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed . | 108 | Kg | |
| 75 | 75 | Material & labour mild steel screw bolts 11mm to 15mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 10cm and not exc.15cm long complete all as specified and as directed. | 39 | Kg | |
| 76 | 76 | Supply and fixing 1.00mm thick Mild steel sheet eaves gutters, galvanised class 3, half round with 150mm dia rounded edges including necessary fixing arrangement complete all as specified and as directed. | 32 | RM | |
| 77 | 77 | Supply and fixing steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.\n | 2.65 | Sqm | |
| 78 | 78 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.\n | 120 | Sqm | |
| 79 | 79 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.\n | 10.5 | Sqm | |
| 80 | 80 | Supply and fixing 4mm thick designer pre-painted HPSC(High Pressure Steam Cured) board as in false ceiling with powder coated GI snap grid/section of size 600mm x 600mm fixed to wall hanging from soffits/trusses using adjustable supporting hanger comprising of 4mm dia MS rod or wire ‘J’ type hook, nuts, bolts, holding down clips with powder coated GI section of size 36.5mm x 25mm x 1.4mm (main tee) and 23.5mm x 26.4mm x 1.4mm (cross tee) and wall angle of size 25mm x 25mm x 1.4mm complete all as specified and as directed.\n | 26.3 | Sqm | |
| 81 | 81 | Material and labour for non skid ceramic coloured tiles (Premium Quality) 7 to 8mm thick (Square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.\n | 48 | Sqm | |
| 82 | 82 | Material and labour for glazed ceramic coloured tiles (Premium Quality) of size 300x200x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed.\n | 10.5 | Sqm | |
| 83 | 83 | Material and labour for pre-painted precast Cement Concrete chequered tiles of size 200 x 200 x 25mm thick as in floor, set and jointed in neat cement slurry and pointed with cement laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.\n\n | 20 | Sqm | |
| 84 | 84 | Materials and labour for 15 mm thick rendering on brick or concrete surface in cement mortar (1:3) and finished the surfaces even and smooth with using extra cement complete all as specified and as directed.\n | 29 | Sqm | |
| 85 | 85 | Materials and labour for flush pointing to squared rubble masonry, coursed or uncoursed in cement mortar (1:3) complete all as specified and as directed. | 10.2 | 10 Sqm | |
| 86 | 86 | Materials and labour for 15 mm thick rendering on fair faces of brick work mixed with water proofing compound as manufacturer instructions in cement mortar (1:4) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.\nNote: WPC shall be measured and paid seperately. | 172 | Sqm | |
| 87 | 87 | Materials and labour for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. | 152 | Sqm | |
| 88 | 88 | Materials and labour for rendering 15mm thick plaster in cement mortar (1:4) on stone masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed. | 15 | Sqm | |
| 89 | 89 | Materials and labour for rendering 15mm thick plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. | 164 | Sqm | |
| 90 | 90 | Material and labour for applying two coats of exterior weather paint over a coat of primer including preparation of newly plastered surfaces of wall complete all as specified and as directed.\n | 172 | Sqm | |
| 91 | 91 | Materials and labour for preparation of newly plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of primer over and including 2mm thick wall care putty complete all as specified and as directed.\n | 142 | Sqm | |
| 92 | 92 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.\n | 65 | Sqm | |
| 93 | 93 | Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.\n | 63 | Sqm | |
| 94 | 94 | Supply and fixing 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane complete all as specified and as directed.\n | 6.5 | Sqm | |
| 95 | 95 | Supply and fixing 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.\n | 6 | RM | |
| 96 | 96 | Supply and fixing 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to retaining wall for weep holes complete all as specified and directed.\n | 190 | RM | |
| 97 | 97 | Supply and fixing 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.\n | 15 | RM | |
| 98 | 98 | Supply and fixing 110/110 mm PVC (SWR) 'S' trap complete all as specified and as directed | 1 | Each | |
| 99 | 99 | Supply and fixing 110 mm bore PVC (SWR) reducer complete all as specified and as directed.\n | 4 | Each | |
| 100 | 100 | Supply and fixing 110mm PVC (SWR) WC connector with lip ring complete all as specified and as directed.\n | 1 | Each | |
| 101 | 101 | Supply and fixing 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.\n | 2 | Each | |
| 102 | 102 | Supply and fixing Low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to walls,ceilings or in floors etc.complete all as specified and as directed. \n | 10 | RM | |
| 103 | 103 | Material and labour for 150mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified and directed. | 12 | RM | |
| 104 | 104 | Material and labour for 300mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified and directed. | 12 | RM | |
| 105 | 105 | M&L for plain cement Concrete 1:3:6 type C2 (using 40m graded crushed stone aggregate) as in bed to 150mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. | 12 | RM | |
| 106 | 106 | M&L for plain cement Concrete 1:3:6 type C2 (using 40m graded crushed stone aggregate) as in bed to 300mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. | 12 | RM | |
| 107 | 107 | Supply and fixing 15mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed.\n | 4 | Each | |
| 108 | 108 | Supply and fixing 15mm bore stop valve, fancy type cast copper alloy, chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends fixed to GI pipe complete all as specified and as directed by the Engr-in-Charge.\n | 4 | Each | |
| 109 | 109 | Supply and fixing brass chromium plated towel rail 600mm long fixed with and including Chromium plated brass screws complete all as specified and as directed.\n | 1 | Each | |
| 110 | 110 | Supply and fixing 15mm dia PVC connection pipe 450mm long with PTMT nuts complete all as specified and as directed.\n | 2 | Each | |
| 111 | 111 | Supply and fixing as in replacement for vitreoues china WHB, white, flat back, of size 630X450mm including CP brackets, CP waste coupling 32 mm bore, PVC waste pipe 32mm dia with and including 15mm bore PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and as directed.\n | 1 | Each | |
| 112 | 112 | Supply and fixing Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, flushing pipe, antisyphonage pipe, etc. including making good the disturbed floor complete all as specified and as directed.\n | 1 | Each | |
| 113 | 113 | Supply and fixing 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge. \n | 1 | Each | |
| 114 | 114 | Supply and fixing as in replacement stainless steel (conforming to AISI-304 grade) kitchen sink with drain board of overall size 915mm x 460mm and bowl size 410mm x 310mmx 160mm depth or equivalent made of 1mm thick stainless steel sheet with 32mm bore CP waste coupling, 32mm bore PVC waste pipe(heavy duty) 90 cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete all as specified and as directed by the Engr-in-Charge.\n | 1 | Each | |
| 115 | 115 | Material and labour looking mirror of size 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.\n | 1 | Each | |
| 116 | 116 | Supply and fixing 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.\nMake: Bansal/ Tata/ Jindal/ Prakash | 20 | RM | |
| 117 | 117 | Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.\n | 16 | RM | |
| 118 | 118 | Supply and fixing 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete laid in trenches or in air with support of brick/ concrete pillars complete all as specified and as direcetd.\nNote- Brick/ Concrete pillars shall be measured and paid seperately in respective items. | 30 | RM | |
| 119 | 119 | Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete laid in trenches or in air with support of brick/ concrete pillars complete all as specified and as direcetd.\nNote- Brick/ Concrete pillars shall be measured and paid seperately in respective items. | 50 | RM | |
| 120 | 120 | Supply and fixing 25mm bore galvanised steel water tubing medium grade including all fittings and fixed complete laid in trenches or in air with support of brick/ concrete pillars complete all as specified and as direcetd.\nNote- Brick/ Concrete pillars shall be measured and paid seperately in respective items. | 100 | RM | |
| 121 | 121 | Supply and fixing 50mm bore galvanised steel water tubing medium grade including all fittings and fixed complete laid in trenches or in air with support of brick/ concrete pillars complete all as specified and as direcetd.\nNote- Brick/ Concrete pillars shall be measured and paid seperately in respective items. | 145 | RM | |
| 122 | 122 | Supply and fixing 65mm bore galvanised steel water tubing medium grade including all fittings and fixed complete laid in trenches or in air with support of brick/ concrete pillars complete all as specified and as direcetd.\nNote- Brick/ Concrete pillars shall be measured and paid seperately in respective items. | 46 | RM | |
| 123 | 123 | Supply and fixing 80mm bore galvanised steel water tubing medium grade including all fittings and fixed complete laid in trenches or in air with support of brick/ concrete pillars complete all as specified and as direcetd.\nNote- Brick/ Concrete pillars shall be measured and paid seperately in respective items. | 50 | RM | |
| 124 | 124 | Supply and fixing 40mm bore galvanised steel tubes light grade including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as direcetd.\n\n | 20 | RM | |
| 125 | 125 | Supply and fixing 25mm bore galvanised steel tubes light grade including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as direcetd.\n\n | 12 | RM | |
| 126 | 126 | Supply and fixing 80mm bore Cast Iron Sluice Valve with brass spindle, iron wheel head, both end flanged, ISI marked, Class PN 1.6, confirming to IS 14846 : 2000 with MS bolts, nuts and washers and a pair of rubber gasket joints complete all as specified and as directed by the Engr-in-Charge. \n | 2 | Each | |
| 127 | 127 | Supply and fixing 65mm bore Cast Iron Sluice Valve with brass spindle, iron wheel head, both end flanged, ISI marked, Class PN 1.6, confirming to IS 14846 : 2000 with MS bolts, nuts and washers and a pair of rubber gasket joints complete all as specified and as directed by the Engr-in-Charge. \n | 2 | Each | |
| 128 | 128 | Supply and fixing 50mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engr-in-Charge. \n | 4 | Each | |
| 129 | 129 | Supply and fixing 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engr-in-Charge. \n | 2 | Each | |
| 130 | 130 | Supply and fixing 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engr-in-Charge. \n | 2 | Each | |
| 131 | 131 | Supply and fixing 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engr-in-Charge. \n | 2 | Each | |
| 132 | 132 | Supply and fixing 65mm bore Cast Iron Non Return Valve, Swing type, both end flanged, ISI marked, PN 1.6, confirming to IS 5312 : 1984 Part-I, gasket joints, nuts and bolts including testing complete all as specified and as directed by the Engr-in-Charge. \n | 2 | Each | |
| 133 | 133 | Supply and fixing cast iron foot valve flange type of 50mm dia with flap & weight plate sheet and jointing conforming to IS-4038 with & including rubber gasket 6mm thick including 12mm dia , 50mm long bolts with nuts & washers complete all as specified and as directed. \n | 2 | Each | |
| 134 | 134 | Supply and fixing as in replacement armoured rubber hose of 50mm dia bore complete all as specified and as directed. \nMake: UNIK/SWASTIK or equivalent ISI marked approved by GE | 20 | RM | |
| 135 | 135 | Supply of Chlorine Test kit with coloured sample complete with all testing fitments and OT solution in sutable size wooden box complete all as specified and as directed. \nMake: Ion Exchane/Rmco/Declibac | 1 | Each Set | |
| 136 | 136 | Supply of PH test kit with coloured sample covered under BTB (range 6.0 to 7.0) or phenol red (range 6.8 to 8.4) with necessary fitments and 100 ml testing solutionin sutable size wooden box complete all as specified and as directed. \nMake: Ion Exchane/Rmco/Declibac | 6 | Packet of 100 tab | |
| 137 | 137 | Supply of TDS Meter (Electronic, digital and Pocket type) complete all as specified and as directed. \nMake: Ion Exchane/Rmco/Declibac | 1 | Each Set | |
| 138 | 138 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, (including unscrewing from boards/out-let boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc.), removing materials off the site of work and making good disturbed surfaces of walls, floors, etc.all as directed. | 27 | Per Point | |
| 139 | 139 | Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including 20mm PVC conduit with all accessories and PVC rectangular boxes for mounting switch socket and fan regulator etc complete all as specified and as directed. \n\nNote: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.\n | 18 | Per Point | |
| 140 | 140 | .-Ditto- all as per item No 139.00 here-in-before but for 3 pin 6 amps switch socket combination on the independant board with 1.5 Sqmm cable and -ditto-. | 4 | Per Point | |
| 141 | 141 | .-Ditto- all as per item No 139.00 here-in-before but for 3 pin 6 amps switch socket combination on the same board with 1.5 Sqmm cable and -ditto-. | 2 | Per Point | |
| 142 | 142 | .-Ditto- all as per item No 139.00 here-in-before but for one 5 pin 6/16 Amps switch socket combination on independent board with 2.5 sqmm PVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor and -ditto-. | 3 | Per Point | |
| 143 | 143 | Supply and fixing Piano switch flush button single pole one way 5 Amps complete all as specified and as directed.\n | 14 | Each | |
| 144 | 144 | Supply and fixing socket socket combination 2 in 1, 5 pin, 6 Amps, 230 volt flush type complete all as specified and as directed. \n | 4 | Each | |
| 145 | 145 | Supply and fixing switch socket combination 2 in 1, 5 pin, 6/16 Amps, 230 volt flush type complete all as specified and as directed.\n | 3 | Each | |
| 146 | 146 | Supply and fixing socket outlet 2/3 pin, 6 Amps, 230 volt flush type complete all as specified and as directed\n | 2 | Each | |
| 147 | 147 | Supply and fixing fan regulator 100/120 watt step type AC 220 Volt complete all as specified and as directed.\n | 2 | Each | |
| 148 | 148 | Supply and fix ceiling rose surface Polycarbonate/ PVC three terminal complete all as specified and as directed.\n | 14 | Each | |
| 149 | 149 | Supply and fixing MCB DB SPN 8 ways double door including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed.\n | 2 | Each | |
| 150 | 150 | Supply and fixing MCB 20 Amps, SPN, 410 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed.\n | 2 | Each | |
| 151 | 151 | Supply and fixing MCB 6 to 32 Amps, SP, 240 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed.\n | 6 | Each | |
| 152 | 152 | Supply and fixing for lamp holder suitable for batten fittings complete all as specified and as directed.\n | 6 | Each | |
| 153 | 153 | Supply and fixing for 1 X 10Watt, 230V LED Lamp with B-22 base suitable for holder fittings complete all as specified and as directed.\n | 6 | Each | |
| 154 | 154 | Supply and fixing for surface mounted ultra bright, glass shell, glare free, wide angle, LED tube light fitting ( LED tube and Batten) 1 X 20Watt, 230V, 1200mm, 6500K with G13 lamp holders including all accessories and connecting to celling rose with twin core flexible copper wire complete all as specified and as directed.\n | 6 | Each | |
| 155 | 155 | Supply and fixing 1 x 10 Watt environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LED with IP65 complete all as specified and as directed.\n | 4 | Each | |
| 156 | 156 | Material and labour for Compact street lighting luminaires with deep drawn housing for single 50 Watt LED, 5700K with toughened glass protection, pressure die cast aluminium housing IP66,with epoxy white powder coated and fixing bracket made of 32mm bore galvanised iron light grade pipe made to shape having overall length 1.2 mtr ,fixed over the vertical wall through two numbers mild steel clamp of 25mm width ,3mm thick MS flat strip and four Nos nuts,bolts & washers of 12mm dia ,150mm long grouted into wall complete all as directed . \n | 6 | Each | |
| 157 | 157 | Supply and fixing Decorative gate light made up of high grade unbreakable polycarbonate material LED light fitting (W-242mm & H- 250mm) on gate pillar suitable for mounting on 40mm or 50 mm dia GI pipe icluding connectins with 3 core Copper cable of 1.5 sq mm PVC insulated and PVC sheathed of length not more than 0.5 mtr each and PVC connector etc and including 20 Watt LED lamp inside the fitting all as directed by Engr-in-charge\n | 2 | Each | |
| 158 | 158 | Supply and fixing Crown shaped Post top lantern in soothing opal finish made up of ploycarbonate LED light fitting (W-200mm & H- 235mm) on gate pillar suitable for mounting on 40mm or 50 mm dia GI pipe icluding connectins with 3 core Copper cable of 1.5 sq mm PVC insulated and PVC sheathed of length not more than 0.5 mtr each and PVC connector etc and including 20 Watt LED lamp inside the fitting all as directed by Engr-in-charge\n | 20 | Each | |
| 159 | 159 | Supply and fixing MS pipe for gate light fittings heavy grade of size 40 mm dia duly painted with two coats of black colour synthetic enamel paint over a coat of red oxide primer and cut into pieces of required length, approx 1.5 mtr including fixing grouting and necessary excavation and PCC (1:3:6) type C2 (using 40mm graded stone aggregate) \nNote:- Excavation upto 600mm for the poles and PCC shall be deemd to be inclusive of quoted rate.\n | 30 | RM | |
| 160 | 160 | Supply and fixing 25mm dia Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed.\n | 15 | RM | |
| 161 | 161 | Supply and fixing 25mm dia flexible conduit with MS clamps and screws etc complete all as specified and as directed.\n | 15 | RM | |
| 162 | 162 | Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 25 Sqmm 4 core laid in trenches as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed.\nNote : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item. | 125 | RM | |
| 163 | 163 | Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 10 Sqmm 2 core laid in trenches as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed.\nNote : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item. | 90 | RM | |
| 164 | 164 | Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 6 Sqmm 2 core laid in trenches as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed.\nNote : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item. | 115 | RM | |
| 165 | 165 | M & L for Copper conductor armoured cables of size 3 core 6 Sq mm for elecric motor from starters in and in rigid non metalic PVC conduit/ flexible PVC conduit complete all as specified and as directed.\n(Note: PVC conduit/ flexible conduit shall be measured and paid seperately) \n\n | 20 | RM | |
| 166 | 166 | M & L for Copper conductor armoured cables of size 2 core 4 Sq mm for elecric motor from starters in rigid non metalic PVC conduit/ flexible PVC conduit complete all as specified and as directed.\n(Note: PVC conduit/ flexible conduit shall be measured and paid seperately)\n\n | 20 | RM | |
| 167 | 167 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. | 5 | Each Set | |
| 168 | 168 | Supply and fixing steel tubular swaged poles, type 410 SP-31 (Overall length 9.00 meter) conforming to IS-2713 (Part 1 to 3) 1980 complete with cast iron base plate, finial taper plug, bolts, nuts and washers, screws. Pole shall be painted with two coat of black bituminous throughout internally and externally upto planting depth and the remaining external portion shall be painted with two coats of aluminum paints over a coat of red oxide primer, painting black & white alternate strips of 30cm each externally from ground level upto 1.2m with synthetic enamel paint, numbering of poles complete all as specified and as directed.\n(Note: Excavation and earth work and PCC shall be measured and paid separately under respective items)\n | 4 | Each | |
| 169 | 169 | Supply & fixing on pole / pole foundation, thermoplastic street light junction box IP 65 with metric knockouts for cable entry suitable of size, weather proof, shock proof, rust free, corrosion free acid and chemical resistant, UV resistant having high grade gasket made of polyurethane and fixing complete with 2 Nos. 20x3 mm thick MS clamps, nuts & bolt, etc. including 01 No of MCB SP 6 Amps, 10 KA, Aluminium Bus bar 63 Amp-2 Nos, cable gland of suitable size and other necessary fixing accessories complete all as specified and directed. | 4 | Each | |
| 170 | 170 | Supply and fixing as in replacement 1200 mm sweep ceiling fan (5 star rated) and connecting with 1.5 Sqmm, 3 Core flexible copper wire from ceiling rose to fan complete all as specified and as directed by the Engr-in-Charge.\nNote : (i) The rate of materials used for scafolding works shall be deemed to be included in the quoted rate, materials also be arranged by the contractor and also shall be taken back safely by the workers employed by the contractor at his own risk.\n(ii) Unservicable fan deposited to MES store. | 2 | Each | |
| 171 | 171 | Supply and fixing as in replacement 450mm sweep size metalic ventilating fan with louvers, AC, Single phase 230/240 volts 1400 RPM and connecting with 1.5 Sqmm, 3 Core flexible copper wire after and including cutting/making opening of walls and making good the disturbed surfaces as per the existing internally and externally complete all as specified and as directed by the Engr-in-Charge. \nNote : (i) The rate of materials used for scafolding works shall be deemed to be included in the quoted rate, materials also be arranged by the contractor and also shall be taken back safely by the workers employed by the contractor at his own risk.\n(ii) Unservicable fan deposited to MES store. | 2 | Each | |
| 172 | 172 | Supply and fixing 200mm sweep size non-metalic exhaust fan AC, Single phase 230/240 volts 1250 RPM and connecting with 1.5 Sqmm, 3 Core flexible copper wire complete all as specified and directed. | 2 | Each | |
| 173 | 173 | Dismaintling existing diesel engine driven pump set complete of any size and capacity including opening of inlet and out let connections of pipes, dismaintling existing plinth/ foundation of pump set and depositing the pump & Engine sets to MES stores of MES Det Aizwal, complete all as specified and as directed. | 2 | Each Job | |
| 174 | 174 | Supply, installation, testing and commisioning of Monobloc pumps Electric driven pump set for raw water lifting, cast iron body, bronze impeller and Carbon steel shaft, coupled with suitable capcity electric motor operated on 3 phase 415 volt AC supply, 'F' class insulation, IP-44 and Pump shall be having discharge capacity 3.2 LPS at 90 M head and power rating 15 HP complete designed for automatic air realease during priming complete all as specified and as directed.\nNote : (i) All accessories required including clamps, nuts bolt, welding work, etc deemed to be included in the quoted rate. | 2 | Each | |
| 175 | 175 | Supply, installation, testing and commisioning of electric drven open well submersible pump, body-cast iron, impeller- cast iron, shaft- stainless steel, delivery casing- cast iron,electric motor operated on single phase, 230 volt, 50Hz AC supply and Pump shall be having discharge capacity 0.40 LPS at 28 M head and power rating 1 HP complete all as specified and as directed.\nNote : (i) All accessories required including clamps, nuts bolt, welding work, etc deemed to be included in the quoted rate. | 1 | Each | |
| 176 | 176 | Supply and fixing for Fully Automatic Star Delta Starter with all required protection such as Single Phase Protection, Over load, Over current to motor of capacity 3 phase 415 Volt 20 HP enclosed in sheet steel enclosure complete including all fixing arrangement and making electrical connections with motor complete all as specified and as directed.\n | 2 | Each | |
| 177 | 177 | Supply and fixing for DOL starter with all required protection such as Single Phase Protection, Over load, Over current to motor of capacity single phase 230Volt open well submerciable motor pump set of capacity 1 HP in suitable size powder coated sheet metal box mounted on wall and all fixing arrangement and making electrical connections with motor complete all as specified and as directed.\n | 1 | Each | |
| 178 | 178 | Supply, installation, testing and commissioning of silent type Diesel Engine driven Generating set (engine as per IS: 10001/10002 and alternator as per IS: 13364) of capacity 40 KVA, 415 volts +/- 5% AC, 3 phase 4 wire, 50 Hz at 0.8 PF (lagging) at 1500 RPM complete with Control panel with necessary protection & meters including sound proof canopy , including the following: -\n(A) ENGINE:-Engine shall be multicylinder four stroke (40 KVA), Radiator water / coolant turbo charged with mechanical governor with the following: - (i) Fuel level indicator, (ii) Fuel tank of capacity as per manufacturers' recommendation, (iii) Fuel inlet arrangement from outside the acoustic enclosure with locking arrangement, (iv) Exhaust manifold and residential type silencer, (v) Continuous 10% overload capacity in every 12 Hrs running, (vi) Self starting with and including 24 V maintenance free battery including charging circuit, (vii) Radiator with first fill of coolant, (viii) Turbocharger with continuous duty rating, (ix) First fill of lub oil, (x) Coolant temp gauge, Lub oil, pressure gauge,Tacho-cum-hour meter, (xi) Engine spare parts list and maintenance manual- 03 copies\n(B) ALTERNATOR:-40 KVA / 32 KW at 0.8 PF(Iag), 415 volt, 3 phase, 4 wire, 50 Hz, 1500 RPM copper wound with (i) self regulated brushless self excitation & (ii) automatic voltage regulator with band of voltage regulation + 2.5% of rated voltage.\n(C) BASE FRAME: -(i) Sturdy robust MS frame duly bolted, coupled, aligned, tested and housed within acoustic enclosure with anti-vibration pad.\n | 1 | Each | |
| 179 | 178.1 | (D) ACOUSTIC ENCLOSURE:-It should be compact, modular construction and approved by ARAI (nodal agency of CPCB) with the following:-\n(i) Overall noise level less than 75 dB measured at 1 mtr distance in free field condition, \n(ii) Inside illumination shall be suitable light as per manufacturers' design. \n(E) CONTROL PANEL :- Factory fabricated free standing of suitable size copper bus bar with and including (i) MCCB 4 pole, 415 Volt, 16 KA, 3 phase of suitable capacity as per OEM, (ii) internal wiring with suitable size copper conductor, (iii) Start and Stop push button, (iv) Digital voltmeter with selector switch, (v) Digital frequency meter, (vi) Digital ammeter with 3 Nos CT and selector switch, (vii) Digital power factor meter, (viii) Three phase energy meter, (ix) Tripping arrangement with hooter for 'High engine temp', 'Low lub oil pressure', 'High lub oil temp', Low and high engine speed' etc as per manufacturers' design.\nNote: - 1. Necessary foundation for installing the DG Set shall be measured and paid seperately in respective items.\n2. Any other accessories shall be provide as per manufacturers' recommendation and cost of the same deemed to be included in the quoted rate\n3. Cost of testing including arrangement of artificial load upto 110% of rated capacity, temporary arrangement of connecting cables, decibel meter and cost of fuel & testing material shall deemed to be included in the quoted rate. | |||
| 180 | 179 | Supply, installation, testing and commissioning of Chemical Dosing System with following specification with complete accessories all as specified and as directed. \nSpecification:-\n(i) Chemical Tank volume- 100 Ltrs ( One plastic chemical solution tank with lid )\n(ii) Max frequency- 100 stroke per min\n(iii) Discharge capacity\n (a) At max back presuure- 1.08 L/H, 12.00 Bar \n (b) At nominal back presuure- 1.38 L/H, 6.00 Bar\n(iv) Suction discharge tubing- O.D. x I.D. = 6mm x 4mm\n(v) Nominal Power- 11 Watts\n(vi) Electronic metering pump- Electronic metering pumps are solenoid driven diaphragm type. The diaphragm is made of high quality fabric reinforced EPDM.\n(vii) One foot valve with strainer fitter on pump suction assembly.\n(viii) One tank level switch fitted on pump suction assembly.\nNote-\n(i) Chemical Dosing System suitable for pre-chlorination.\n(ii) Chlorination result shall give PPM result as 2 PPM to O.2 PPM as required by users recommandations.\ncomplete all as specified and as directed.\n | 1 | Each | |
| 181 | 180 | Supply and fixing Pre-fabricated readymade toilet cabin of size 1200mm x 1200mm x 2100mm with FRP material comprising of door with locking arrangment and inside plumbing items such as EWC, Flushing cistern, tap, pvc pipe line and electrical fitting fixture complete all as specified and as directed.\nMAKE: RAIMATA IMPEX Pvt Ltd or equivalent make as approves by GE. | 1 | Each | |
| 182 | 181 | Supply, installing, testing & commissioning of CPRI approved LT panel board, outdoor type, cubical, dust and vermin proof made out of 3.15 mm thickness MS sheet with front and back door openable type fitted with nuts, bolts and washers fitted with knobs and ginges and air vents incl painting with two coats of enamelled paint over a coat of red oxide primer, suitable for 415 V , 50 Hz, 3 phase, 4 wire suitable for and incl the following :-\nINCOMING\n(a) MCCB FP 100 Amps 36 KA- 01 No (Incoming)\nOUTGOING\n(b) MCB TP 40Amps 10KA C Series - 03 Nos\n(c) MCB SPN 20Amps 10KA C Series - 04 Nos\n(d) Timer for street light with contactor 16 Amp -01 Nos \n(e) Digital voltmeter 0-200 volt, with selector switch-01\n(f) Ameter with CT and selector switch 0-200 Apps-01 No\n(g) LED indicator lamp-03 Nos\n(h) Aluminium bus bar chamber of capacity 200 Amps.\n(j) Internal wiring with suitable size single core copper conductor cable of Red, Yellow, Blue and black colour including lugs, ferrule, tag etc.\ncomplete all as specified and as directed. | 1 | Each | |
| 183 | 182 | Supply installing testing and commissioning of pressure filtratiion plant cum iron removal plant designed to treat water flow 10000 LPH comprising of clarifier to bring down suspended soilds to 50PPM as inlet pressure sand filter including under meaned scope of work:-\n(a) Alum dosing system comprising of 150 lit FRP tank & high speed agitator - 1 Nos\n (i) Tank capacity- 150 Ltrs\n (ii) Discharge- 1 Ltrs/Hr (Max)\n (iii) Pressure - 4 Bar (Nominal)\n(b) Lime dosing system comprsing of 150 lit FRP tank & high speed agitator - 1 Nos\n(c) Polymer dosing system comprising of 150 Ltrs FRP tank, slow speed agitator - 1 Nos.\n(d) Sodium Hypochlorite dosing system Comprising of 150 Lit FRP tank & high speed agiator - 1 Nos\n(e) Lamella clarifier complete with accessories - 1 Nos\n (i) Design capacity- 10 cum/hr\n (ii) No of FRP plates- 7 Nos\n(f) Static Mixer (flash Mixer) Cum Flocculation Tank - 1 Nos\n (i) Diameter- 1800mm\n (ii) HOS- 2300mm\n (iii) Floc mixer- 0.33 HP\n (iv) Vol of tank- 3.35 cum\n(g) Multigrage filter - 1 Nos.\n (i) Diameter - 1000mm\n (ii) HOS- 1875mm\n (iii) Shell thickness- 4mm\n (iv) Dishend thickness- 4mm \n (v) Operating pressure- 3.5 Kg/sq cm.\n (vi) Max flow rate - 23.50 cum/hr\n (vii) Frontal pipe size- 80mm\n (viii) Media qty- 1213\n (ix) MOC- MS-Epoxy paint inside\n\n\n\n\n\n | 1 | Each | |
| 184 | 182.1 | (h) Acitavated Carbon Filter - 1Nos\n (i) Diameter- 1100mm\n (ii) HOS- 1875mm\n (iii) Shell thickness- 4mm\n (iv) Dishend thickness- 4mm \n (v) Operating pressure- 3.5 Kg/sq cm.\n (vi) Max flow rate - 18.50 cum/hr\n (vii) Frontal pipe size- 80mm\n (viii) Carbon qty- 0.8 cum\n (ix) Carbon depth- 1000mm\n (x) MOC- MS-Epoxy paint inside\n(j) SS Rotameters - Bypass type - 2 Nos\n(k) Interconnecting pipe work & valves - 1 lot\n(l) Sludge Recycling pump of capacity- 2.5 cum / hr @ 30 MWC- 2 Nos. (1W+1S)\n(m) Clarified water pump of 10 cum / hr @ 25 m head- 2 Nos. (1W+1S)\n Notes:- \n(i) Connection to inlet and outlet pipes of sutaible size as required is not included in above scope, which shall be measured and paid separately in respective items.\n(ii) Chlorine dosing system to get desired ppm at source is required to be installed as sappareted items which is not included in above scope.\n(iii) Civil foundation for the equipments is not included in above scope, which shall be measured and paid seperately in respective items. \n(iv) 03 Phase supply through cable connection will be made available at the site of treatment plant however rate for further distribution box with required capacity MCCB/MCBs for the pump sets and any other purpose shall be included in the quoted rates.\ncomplete all as specified and as directed.\n | |||
| 185 | 183 | Materials and labour for earthing complete with copper earth plate electrode 600 mm x 600 mm x 3 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with copper strip of 20x3mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 40mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed.\n | 5 | Each Set | |
| 186 | 184 | Materials and labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or\nfixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed. | 30 | RM |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
