Package-01/Various Building Works/Repair Works/2019-20 Under Kums - Jaitsar
Tender Value
1.38 Crore
Estimated cost
Bid Submission
07 Apr 2020
0 days left
EMD
2.77 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaitsar → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Package-01/Various Building Works/Repair Works/2019-20 Under Kums - Jaitsar
BOQ
| Name of work : Package-01/Various Building works/Repair works/2019-20 under KUMS - Jaitsar | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Covering of Existing Common Auction Platform No. 05 in Main Mandi Yard at KUMS - Jaitsar | |||
| 2 | 2 | Part \"A\" : CONSTRUCTION WORK | |||
| 3 | 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. | |||
| 4 | 4 | a) 1: 4: 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). | 61 | Cum | |
| 5 | 5 | b) M20 grade Nominal Mix \n1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | 59 | Cum | |
| 6 | 6 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. | 15 | Sqm. | |
| 7 | 7 | Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in foundation and plinth with : Cement mortar 1 : 6 (1 cement : 6 coarse sand) | 5 | Cum | |
| 8 | 8 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : With cement mortar 1 :4 ( 1 cement : 4 coarse sand) | 126 | Sqm | |
| 9 | 9 | Part \"B\" : COVERING WORK | |||
| 10 | 10 | Steel work in built up tubular trusses including cutting, hoisting (height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete : Hot finished welded type tubes. | 46059 | Kg. | |
| 11 | 11 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete. | 20090 | Kg. | |
| 12 | 12 | Extra for hoisting and fixing for every additional one metre or part thereof beyond 10 mtr height. | 58918 | Kg. | |
| 13 | 13 | Extra for providing and fixing wind ties of 40x 6mm flat iron section. | 2332 | Rmt. | |
| 14 | 14 | Providing and fixing square bars or other flat welded to window, ventilators etc. | 570 | Kg. | |
| 15 | 15 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 2067 | Sqm | |
| 16 | 16 | Providing and fixing Multi Rib Proofing/Cladding of Pre Painted Galvaume(PPGL) profile steel sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) Min. 550MPa steel grade conforming to ASTM A792M & AS 1397 , 5-7 microns epoxy primer on both side of the sheet and Super Durable Polyester(SDP) top coat of Min. 18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation | |||
| 17 | 17 | and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge and should so designed to prevent leakages. The sheet shall be fixed using self drilling /self tapping hot dip Zinc coated hex headfastener of size 12x14x55 mm long. complete upto any pitch in horizontal/ vertical or curved surfaces with all scaffolding and excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. \na) 0.60 mm +/- 5% total coated thickness (TCT) AZ coating @150gsm | 2543 | Sqm | |
| 18 | 18 | Providing and fixing Pre Painted Galvaume(PPGL) profile sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness(TCT), Zinc coating 150 grams per sqm Min. 550MPa steel grade conforming to ASTM A792M & AS 1397 , 5-7 microns epoxy primer on both side of the sheet and Super Durable Polyester(SDP) top coat of Min. 18 microns. Sheet using self drilling/ self tapping screws complete : Ridges plain (500 - 600 mm) | 47 | Rmt. | |
| 19 | 19 | Part \"C\" : ELECTRICAL WORK | |||
| 20 | 20 | P & F 240-415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/C/D tripping characterstic) ISI marked IS 8828 (1996)]/ conforming to IEC 60898 in existing board/ sheets including making connections, testing etc, as required : Single pole MCB 6 A to 32 A rating Group-I. | 36 | Each | |
| 21 | 21 | P & F 240/415 V isolator conforming to IS: 13947-III/ IEC 60947-3 on existing board/ sheet including making connections, testing etc. as required.\nDouble pole isolator\na) 30A / 40 A rating Group-I | 4 | Nos | |
| 22 | 22 | P & F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar, conforming to IS 13032 & IS 8623 including making internal DB terminations with copper lugs, testing etc. as required.\ni) Double door (Single phase ) \n(a) 12 Way Group-I | 4 | Each | |
| 23 | 23 | Maintenance free Gel Earthing with pipe in pipe / Pipe in strip technoloty filled with anti corrosive conductive compound (CPRI Tested) below the ground in 150-200 mm dia. earth pit & surrounding filled with required mineral filling compound (MFC should fave hygroscopic property to ratain the moisture for long time to create low resistance zone) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300 mm complete testing of earth resistance as required. of following sizes.\nWith pipe in pipe Technology (Inner pipe dia. / Outer pipe dia) 80-100 micron GI coating\ni) GI pipe 2000mm long, 50/25mm Terminal 12 mm GI strip | 2 | Each | |
| 24 | 24 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/ recess including riveting, soldering, saddles, making connection etc. as required.\n(a) 8 SWG Copper Wire | 20 | Mtr. | |
| 25 | 25 | Wiring for sub mains ISI marked (IS : 694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. support wire duly clipped etc. as required.\na) 10.0 sq.mm. Group-I | 180 | Mtr. | |
| 26 | 26 | S & F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps , fastener as required including cutting the wall coveing conduit and making good the same as required.\na) 25 mm Group-I | 330 | Mtr. | |
| 27 | 27 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.\n(a) 2 x 2.5 sqmm Group-I | 950 | Mtr. | |
| 28 | 28 | P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes / frames including making holes for swithches etc. with brass screws, washers/ zinc plated nut and bolts as required.\na) 6.4 mm thick Group-I | 1 | Sqm | |
| 29 | 29 | P/Laying P.V.C. / XLPE insulated & PVC sheathed cable of 1.1 KV grade with aluminium conductor of IS: 1554 P-1 of Group-1 of approved make in ground as per IS:1225 including excavation of 30 cm x 75cm size trench, 25 cm thick under layer of sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connecton, testing etc. as required of size. | |||
| 30 | 30 | a) 10 sqmm 4 core (armourned) | 90 | Mtr. | |
| 31 | 31 | b) 10 sqmm 4 core (unarmourned) (Cable laying on surface) | 180 | Mtr. | |
| 32 | 32 | P&F of IP-65 protected high power LED flood light system with Pressure diecast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50 Hz, of high power LED fixture supplied with pre wired cable of 1 mtr. Integrated driver shall be high efficiency having efficiency more than 85% and in compliance to IEC standards/BIS certified. The system level luminaire efficacy >=100 with High Power LEDs of | |||
| 33 | 33 | CREE/NICHIA/OSRAM/PHILIPS/SEOUL make is to be used. LED driver input voltage AC 110 to 270 V AC with auto resetting Safety cut-off. Input frequency 50Hz±3% Power factor >0.95 driver efficiency >85%, control gear integral design, THD(1) <10%. Electrical connector must be provided surge protection Min >=5KV internal and 10 KV external in 80W onwards, Humidity 10% to 90% RH working temp -20C to 50C. LED luminaire specifications : Life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintenance. Manufactures word mark/ Name engraved/ Embossed on die cast housing to allow traceability/authenticity till life of fixture, Fixtures shall be CE complained. | |||
| 34 | 34 | a) High Power LED Flood Light 120 W Group-A1 | 20 | Each | |
| 35 | 35 | b) High Power LED Flood Light 160W Group-A1 | 4 | Each | |
| 36 | 36 | P&F of IP-65 protected LED street light luminaries on existing bracket. Fixture made of powder coated single piece pressure die cast aluminum with heat dissipation fins on housing with UV stabilized PC/ Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The system level luminaries efficacy >=100 with high power LEDs of CREE/ NICHIA/ OSRAM/ PHILIPS/ SEOUL make is to be used. LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input frequency 50Hz ±3% power factor >0.95 driver efficiency >85%, THD (I) <10% humidity 10% to 90% RH working temp -20C to 50C. Life | |||
| 37 | 37 | expectancy equal or more than 50000 burning hrs with minimum 70% initial lumens maintained, rendering index >75%. Surge protection shall be min = 5 KV internal and min 10 KV external. Manufactures word mark/Name engraved / embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complained.\na) LED Street light fixture 90 Watt Group-A1 | 12 | Each | |
| 38 | 38 | S&F of Street light bracket made out from following size of \"B\" class GI pipe with heavy duty pole clamp, saddles suitable fastners etc. as required.\na) 32 mm dia. | 12 | Mtr. | |
| 39 | 39 | Construction of Labour Shed in New Mandi Yard at KUMS - Jaitsar | |||
| 40 | 40 | Part - \"A\" Civil Work | |||
| 41 | 41 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter : All kinds of soils | 129 | Cum | |
| 42 | 42 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including extra lead 1000 meter beyond 50 m with all lift. | 65 | Cum | |
| 43 | 43 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. | |||
| 44 | 44 | a) 1: 4: 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). | 34 | Cum | |
| 45 | 45 | b) M20 grade Nominal Mix \n1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | 1 | Cum | |
| 46 | 46 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. \nM20 grade Nominal Mix / Design Mix | 9 | Cum | |
| 47 | 47 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. | 58 | Sqm. | |
| 48 | 48 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc : M20 grade Nominal Mix / Design Mix | 27 | Cum | |
| 49 | 49 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering : M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | 4 | Cum | |
| 50 | 50 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. | 245 | Sqm. | |
| 51 | 51 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level : Cold twisted deformed bars (IS : 1786). | 3600 | Kg. | |
| 52 | 52 | Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in foundation and plinth with : Cement mortar 1 : 6 (1 cement : 6 coarse sand) | 113 | Cum | |
| 53 | 53 | Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) | 127 | Cum | |
| 54 | 54 | Half brick masonry with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in Superstructure , above plinth level upto floor five level : Cement mortar 1 : 4 (1 cement : 4 coarse sand). | 51 | Sqm. | |
| 55 | 55 | Honey comb brick work half brick thick with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 upto floor five level in : Cement mortar 1 : 4 (1 cement : 4 coarse sand) | 36 | Sqm. | |
| 56 | 56 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete : South (Red/Cholate Colour) : a) 1501 Cm2 to 3600 Cm2 Tiles | 14 | Sqm. | |
| 57 | 57 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). | 133 | Sqm. | |
| 58 | 58 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete : size 600 mm X 600 mm. | 25 | Sqm. | |
| 59 | 59 | Providing and fixing external grade board solid core single leaf flush door shutters IS: 2202(Part-II)1996 marked using Phenol formal dehyderesin in glue both sides with approved stainless steel fittings complete as per annexure 'A' : 35mm thick : commercial veneer both side. | 12 | Sqm. | |
| 60 | 60 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20mm | 11 | Rmt. | |
| 61 | 61 | Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile C | 39 | Rmt. | |
| 62 | 62 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%] | 16 | Sqm | |
| 63 | 63 | Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) : For stainless steel (Grade 304) | 40 | Kg. | |
| 64 | 64 | Providing and laying factory made chamfered edge Plastic coated Designer Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required Grey/Yellow/Red or any other colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge: \n60 mm thick c.c. paver block of M-30 grade with approved color design and pattern. | 78 | Sqm. | |
| 65 | 65 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : For area of each slab from 901 to 2000 Sq.Cm : | 88 | Sqm. | |
| 66 | 66 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide | 1328 | Kg. | |
| 67 | 67 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint | 11 | Sqm. | |
| 68 | 68 | Grading roof for water proofing treatment with water proffing compound : Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | 7.5 | Cum | |
| 69 | 69 | Providing and fixing 20 mm thick precast terrazo tiles of approved make, with marble chips of size upto 6mm laid over roof with neat cement slurry mixed with pigment to match the shade of the tiles, including cutting ,grinding rubbing with machine complete on 20 mm thick bed of cement sand mortar 1 : 4. | 149 | Sqm. | |
| 70 | 70 | Plaster on new surface on wall in cement sand mortar 1:6 including racking of joints etc. complete fine finish : | |||
| 71 | 71 | a) 20mm thick | 448 | Sqm. | |
| 72 | 72 | b) 12mm thick | 524 | Sqm. | |
| 73 | 73 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | 149 | Sqm. | |
| 74 | 74 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. | 593 | Sqm. | |
| 75 | 75 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect : On new work. | 461 | Sqm. | |
| 76 | 76 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 200 | Sqm. | |
| 77 | 77 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension) : With 75 mm opening when closed. | 7.5 | Sqm | |
| 78 | 78 | Part - \"B\" Sanitary Work | |||
| 79 | 79 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : size 580 x 440mm | 2 | Each | |
| 80 | 80 | P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor | 2 | Each | |
| 81 | 81 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete : WVC Flat Back half stall Urinal size 580x380x350 mm/ Angle back 450x375x350 type liped front.. | 3 | Each | |
| 82 | 82 | P & F W.V.C. Urinal Partition Plate of approved standard make of size 630x315mm including making good the wall. | 3 | Each | |
| 83 | 83 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: Coloured-PVC with PVC bend as per IS : 7231 | 4 | Each | |
| 84 | 84 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 32 mm waste pipe complete including cutting & making good the wall : Vitreous china flat back wash basin 630x450 mm | 4 | Each | |
| 85 | 85 | Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete : Size 600 x 450mm x 4 mm thick | 4 | Each | |
| 86 | 86 | P & F Grating of approved quality/make: Stainless Steel Grating : 125 mm nominal dia | 10 | Each | |
| 87 | 87 | P & F G.I. Pipes with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : (Internal work ) Medium Duty Pipes : Internal work : | |||
| 88 | 88 | a) Exposed on wall\ni) 15 mm dia nominal bore | 60 | Rmt. | |
| 89 | 89 | ii) 25 mm dia nominal bore | 25 | Rmt. | |
| 90 | 90 | Making connection of G.I. distribution branch with G.I. main including all fitting : Upto 25mm dia | 1 | Each | |
| 91 | 91 | P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make: | |||
| 92 | 92 | a) C.P. Pillar cock, 15 mm dia nominal bore | 6 | Each | |
| 93 | 93 | b) C.P. Pillar cock, Swan-neck with casted spout, 15mm nominal bore. | 4 | Each | |
| 94 | 94 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: | |||
| 95 | 95 | a) C.P. Brass bib cock,15mm nominal bore. | 2 | Each | |
| 96 | 96 | b) C. P. Brass swan - neck, 15mm nominal bore. | 2 | Each | |
| 97 | 97 | c) C. P. Brass Long body, 15mm nominal bore weight not less than 690 gm | 4 | Each | |
| 98 | 98 | P & F Mixing Range (15 mm)of superior quality and approved make : C.P. One hole/close hole basin mixer with casted spout. | 2 | Each | |
| 99 | 99 | P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: | |||
| 100 | 100 | a) C.P. Brass 15mm nominal bore. | 2 | Each | |
| 101 | 101 | b) CP brass concealed Stop Cock 15mm. | 6 | Each | |
| 102 | 102 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. : C.P. Inlet connection 15 mm Brass (IS:8931 marked). | 6 | Each | |
| 103 | 103 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 25mm nominal bore. | 2 | Each | |
| 104 | 104 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including placing on terrace( at all floors),making connection etc. complete of approved design. Details of cost for 500 litre | 4000 | Ltr. | |
| 105 | 105 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead : Depth up to 0.5 M | 2 | Each | |
| 106 | 106 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. : Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. | 4 | Each | |
| 107 | 107 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr : Size 230 x110 x150 cm.(for 20 users) | 1 | Each | |
| 108 | 108 | Construction of Open Surface Drain with 112mm thick brick masonry in CM 1:4,110mm thick base concrete 1:5:10, 37mm thick M-15 grade C.C. flooring ,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing : 150mm drain,225mm Av. depth. | 20 | Rmt. | |
| 109 | 109 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes : Type-B, 110 mm diameter. | 18 | Rmt. | |
| 110 | 110 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. | |||
| 111 | 111 | a) Coupler : 110mm dia | 6 | Each | |
| 112 | 112 | b) Single bend w/o door 87.5 Deg. : 110mm dia | 12 | Each | |
| 113 | 113 | Construction of soakage well in all types of soil of approved drawing, top 90cm portion in 450mm thick masonry with CM 1:6, 80mm thick stone slab covering, jointing of slab in CM 1:3, Ralthal, Kharanja 40mm thick M-15 grade C.C. flooring, earth work etc. complete incl. disposal of surplus earth within alead of 50mtr : Inner dia 60cm & 10 to 12 mtr deep | 2 | Each | |
| 114 | 114 | Part - \"C\" Electric Work | |||
| 115 | 115 | Wiring of light point / fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper counductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked Midium duty PVC conduit & it's accessories, round tiles, hot dipped Galvanized Modular Box with earth terminal, 6A modular switch, Modular plate with grid plate, screws, making connections, testing etc. as requaired. | |||
| 116 | 116 | (a) Short point (up to 3 mtr.) Group-I | 16 | Each | |
| 117 | 117 | (b) Medium Point (up to 6 mtr.) Group-I | 16 | Each | |
| 118 | 118 | (c) Long Point (up to 10 mtr.) Group-I | 10 | Each | |
| 119 | 119 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper counductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked Midium duty PVC conduit & it's accessories, round tiles, hot dipped Galvanized Modular Box of 20 SWG with earth terminal, 6A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as requaired. | |||
| 120 | 120 | (a) On Board Group-I | 10 | Each | |
| 121 | 121 | (b) Medium point (upto 6 mtr.) Group-I | 4 | Each | |
| 122 | 122 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. | |||
| 123 | 123 | (a) 2 x 2.5 sqmm + 1 x 1.5 Sqmm Group-I | 180 | Mtr. | |
| 124 | 124 | (b) 2 x 4 sqmm + 1 x 2.5 Sqmm Group-I | 130 | Mtr. | |
| 125 | 125 | (c) 2 x 6 sqmm + 1 x 2.5 sqmm Group-I | 90 | Mtr. | |
| 126 | 126 | (d) 1 x 1.5 sqmm Group-I | 90 | Mtr. | |
| 127 | 127 | P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. Group-I | 12 | Each | |
| 128 | 128 | P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. Group-I | 12 | Each | |
| 129 | 129 | P & F 240-415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/C/D tripping characterstic) ISI marked IS 8828 (1996)]/ conforming to IEC 60898 in existing board/ sheets including making connections, testing etc, as required.\n(a) Single pole MCB 6 A to 32 A rating Group-I | 16 | Each | |
| 130 | 130 | P & F 240/415 V isolator conforming to IS: 13947-III/ IEC 60947-3 on existing board/ sheet including making connections, testing etc. as required.\ni) Double pole isolator\na) 30A / 40 A rating Group-I | 3 | Each | |
| 131 | 131 | P & F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar, conforming to IS 13032 & IS 8623 including making internal DB terminations with copper lugs, testing etc. as required.\na) Double door (Three phase ) \n(i) 6 Way Group-I | 1 | Each | |
| 132 | 132 | S & F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps , fastener as required including cutting the wall covering conduit and making good the same as required.\na) 25 mm Group-I | 160 | Mtr. | |
| 133 | 133 | P/Laying P.V.C. / XLPE insulated & PVC sheathed cable of 1.1 KV grade with aluminium conductor of IS: 1554 P-1 of Group-1 of approved make in ground as per IS:1225 including excavation of 30 cm x 75cm size trench, 25 cm thick under layer of sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. | |||
| 134 | 134 | a) 10 sqmm 4.0 core (armourned) | 120 | Mtr. | |
| 135 | 135 | b) 16 sqmm 4.0 core (armourned) | 60 | Mtr. | |
| 136 | 136 | P&F 9/11/13Watt CFL mirror light with CRCA powder coated housing, diffuser end covers, copper ballast, holder prewired upto terminal block including making connection testing etc. as required (without tube) Group-I | 2 | Each | |
| 137 | 137 | Maintenance free Gel Earthing with pipe in pipe / Pipe in strip technoloty filled with anti corrosive conductive compound (CPRI Tested) below the ground in 150-200 mm dia. earth pit & surrounding filled with required mineral filling compound (MFC should fave hygroscopic property to ratain the moisture for long time to create low resistance zone) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300 mm complete testing of earth resistance as required. of following sizes.\nWith strip in pipe Technology with 80-100 micron GI Coating\ni) GI pipe 2000mm long, 63/80mm inner strip 50mmx3mm copper | 1 | Each | |
| 138 | 138 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/ recess including riveting, soldering, saddles, making connection etc. as required.\n(a) 8 SWG Copper Wire | 10 | Mtr. | |
| 139 | 139 | P&F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod upto 30 cm with 3x1.5 sq.mm PVC nsulated flexible copper conductor making connection testing etc. as required : 1200mm sweep Group-I | 12 | Each | |
| 140 | 140 | P&F 18 swg M.S. Recesed fan box, hexagonal/round of size 130mm dia, depth 75mm, 12mm dia rod fan hook with 100 mm length extended on each side. | 12 | Each | |
| 141 | 141 | P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in exising opening including cost of hardware, flexible copper conductor making connections, testing etc. as required.\na) 225 mm sweep Group-I | 4 | Each | |
| 142 | 142 | P&F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tube light, integral driver, 2000 luman 0 5% tolerance system luman efficiacy of 100 Lm/ Watt minimum expected life time of 25000 burning hours, CCt 5700 K, ANSI, CRI 80, driver efficiency >85%, Life expectancy of driver min 30000 hrs. PF 0.95 at full load/230 volt AC | 14 | Each | |
| 143 | 143 | P&F post top / bollard suitable for following lamps, made of powder coated cast aluminium housing, moulded acrylic lamp compartment with built in anodized aluminium louvers for lamp shielding and glare control, metallic lid top cover, including the cost of control gear complete in all respect. Bollards are including cost of decorative base pipe / plate. (without lamp)\na) 18/13 watt CFL Bollard Group-I | 2 | Each | |
| 144 | 144 | Supplying and fixing of power plug point modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet, making connection testing, etc. as required. Group-I | 4 | Each | |
| 145 | 145 | SITC of ISI mark (IS : 8472) self proming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase (180 to 240 V) Including cost of hardware etc on existing platform complete, Pump shall have following HP Rating, phase, Head, minimum Discharge respectively.\nSelf priming pumps \na) 0.5 HP, 1-Q, (6-28) Mtr., (52-12.0) LPM Group-I | 1 | Each | |
| 146 | 146 | Wiring for sub mains ISI marked (IS : 694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. support wire duly clipped etc. as required.\na) 10.0 sq.mm. Group-I | 60 | Mtr. | |
| 147 | 147 | P&F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required : | |||
| 148 | 148 | a) 5 step fan regulator 2 module Group-I | 12 | Each | |
| 149 | 149 | b) Blanking plate Group-I | 20 | Each | |
| 150 | 150 | P&F of IP-65 protected LED street light luminaries on existing bracket. Fixture made of powder coated single piece pressure die cast aluminum with heat dissipation fins on housing with UV stabilized PC/ Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The system level luminaries efficacy >=100 with high power LEDs of CREE/ NICHIA/ OSRAM/ PHILIPS/ SEOUL make is to be used. LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input frequency 50Hz ±3% power factor >0.95 driver efficiency >85%, THD (I) <10% humidity 10% to 90% RH working temp -20C to 50C. Life expectancy equal or | |||
| 151 | 151 | more than 50000 burning hrs with minimum 70% initial lumens maintained, rendering index >75%. Surge protection shall be min = 5 KV internal and min 10 KV external. Manufactures word mark/Name engraved / embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complained.\na) LED Street light fixture 120 Watt Group-1 | 4 | Each | |
| 152 | 152 | P&F of RCBO with overload, short-circuit and earth leakage protuction ISI markrd (IS12640) / conforming to IEC 61009/1 complete in all respect including making connections, testing etc. as required : \nFour pole 30 mA sensitivity\n25 A rating Group-1 | 1 | Each | |
| 153 | 153 | P&F energy efficient/energy saving 9 Watt IP 20 LED Bulb cool white, in existing holder/ fixture as requires, minimum 900 Lumen output, 25000 burning hours, CCT 5700 K or 6500 K (as per direction of Engineer incharge), ANSI, Lamp efficacy minimum 100 lumen/Watt, CRI 80, Driver efficiency>85%, PF 0.95 at full load / 230 volt AC | 12 | Each | |
| 154 | 154 | S&F laying following size \"B\" class G.I. Pipe confirming to IS : 1239 P-1 (1990) with accessories for laying earth conductor/strip/cable in ground/ surface/recess as required.\na) 80 mm dia. | 3 | Mtr. | |
| 155 | 155 | P&F of IP20 LED Recessed / Surface Mounted, Round / Square Non-Dimmable Down light with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external BIS certified 2.5 KV surge protected driver having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of = 100 lm/ watt and life time of minimum 35000 Burning hours with 70% of initial lumen maintained, CCT 3000 Deg. K / 4000 Deg. K / 6000 Deg. K, maximum power consumption should not more than the specified rating and fixture shall be of CE complained : Recessed Mounting : i) LED Downlight 6/7 W Group-I | 12 | Each | |
| 156 | 156 | Repair & colour washing of covered common auction platform no. 01 in new mandi yard KUMS - Jaitsar | |||
| 157 | 157 | Part \"A\" : Civil Work | |||
| 158 | 158 | Dismantling roofing including ridges, hips, valleys and rafters etc. and stacking the within 50 meter lead of : G.I. Sheet. | 380 | Sqm | |
| 159 | 159 | Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete : Hot finished welded type tubes. | 2981 | Kg. | |
| 160 | 160 | Providing corrugated G.I. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required : 0.63 mm thick with zinc coating not less than 275 gm/m2. | 228 | Sqm | |
| 161 | 161 | L/C for fixing of GI/AC sheet include. Cutting jhiri and repair , cutting of sheet , fixing of sheet with J or L hook and bitumen washer as per direction of EI | 152 | Sqm | |
| 162 | 162 | Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete : 0.63mm thick with zinc coating not less than 275. | 12 | Rmt. | |
| 163 | 163 | Extra for providing and fixing wind ties of 40x 6mm flat iron section. | 466 | Rmt. | |
| 164 | 164 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. | 287 | Sqm. | |
| 165 | 165 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on Old work. | 1624 | Sqm. | |
| 166 | 166 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : With cement mortar 1 :4 ( 1 cement : 4 coarse sand) | 112 | Sqm. | |
| 167 | 167 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. \na) M20 grade Nominal Mix \n1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | 111 | Cum | |
| 168 | 168 | Part \"B\" : Electric Work | |||
| 169 | 169 | P & F 240-415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/C/D tripping characterstic) ISI marked IS 8828 (1996)]/ conforming to IEC 60898 in existing board/ sheets including making connections, testing etc, as required : Single pole MCB 6 A to 32 A rating Group-I. | 14 | Each | |
| 170 | 170 | P & F 240/415 V isolator conforming to IS: 13947-III/ IEC 60947-3 on existing board/ sheet including making connections, testing etc. as required.\nDouble pole isolator\na) 30A / 40 A rating Group-I | 2 | Nos | |
| 171 | 171 | P & F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar, conforming to IS 13032 & IS 8623 including making internal DB terminations with copper lugs, testing etc. as required.\ni) Double door (Single phase ) \n(a) 12 Way Group-I | 2 | Each | |
| 172 | 172 | Maintenance free Gel Earthing with pipe in pipe / Pipe in strip technoloty filled with anti corrosive conductive compound (CPRI Tested) below the ground in 150-200 mm dia. earth pit & surrounding filled with required mineral filling compound (MFC should fave hygroscopic property to ratain the moisture for long time to create low resistance zone) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300 mm complete testing of earth resistance as required. of following sizes.\nWith pipe in pipe Technology (Inner pipe dia. / Outer pipe dia) 80-100 micron GI coating\ni) GI pipe 2000mm long, 50/25mm Terminal 12 mm GI strip | 1 | Each | |
| 173 | 173 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/ recess including riveting, soldering, saddles, making connection etc. as required.\n(a) 8 SWG Copper Wire | 10 | Mtr. | |
| 174 | 174 | Wiring for sub mains ISI marked (IS : 694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. support wire duly clipped etc. as required.\na) 10.0 sq.mm. Group-I | 90 | Mtr. | |
| 175 | 175 | S & F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps , fastener as required including cutting the wall coveing conduit and making good the same as required.\na) 25 mm Group-I | 120 | Mtr. | |
| 176 | 176 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.\n(a) 2 x 2.5 sqmm Group-I | 410 | Mtr. | |
| 177 | 177 | P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes / frames including making holes for swithches etc. with brass screws, washers/ zinc plated nut and bolts as required.\na) 6.4 mm thick Group-I | 0.5 | Sqm | |
| 178 | 178 | P/Laying P.V.C. / XLPE insulated & PVC sheathed cable of 1.1 KV grade with aluminium conductor of IS: 1554 P-1 of Group-1 of approved make in ground as per IS:1225 including excavation of 30 cm x 75cm size trench, 25 cm thick under layer of sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connecton, testing etc. as required of size. | |||
| 179 | 179 | a) 10 sqmm 4 core (armourned) | 40 | Mtr. | |
| 180 | 180 | b) 10 sqmm 4 core (unarmourned) (Cable laying on surface) | 60 | Mtr. | |
| 181 | 181 | P&F of IP-65 protected high power LED flood light system with Pressure diecast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50 Hz, of high power LED fixture supplied with pre wired cable of 1 mtr. Integrated driver shall be high efficiency having efficiency more than 85% and in compliance to IEC standards/BIS certified. The system level luminaire efficacy >=100 with High Power LEDs of | |||
| 182 | 182 | CREE/NICHIA/OSRAM/PHILIPS/SEOUL make is to be used. LED driver input voltage AC 110 to 270 V AC with auto resetting Safety cut-off. Input frequency 50Hz±3% Power factor >0.95 driver efficiency >85%, control gear integral design, THD(1) <10%. Electrical connector must be provided surge protection Min >=5KV internal and 10 KV external in 80W onwards, Humidity 10% to 90% RH working temp -20C to 50C. LED luminaire specifications : Life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintenance. Manufactures word mark/ Name engraved/ Embossed on die cast housing to allow traceability/authenticity till life of fixture, Fixtures shall be CE complained.\na) High Power LED Flood Light 120 W Group-A1 | 8 | Each | |
| 183 | 183 | P&F of IP-65 protected LED street light luminaries on existing bracket. Fixture made of powder coated single piece pressure die cast aluminum with heat dissipation fins on housing with UV stabilized PC/ Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The system level luminaries efficacy >=100 with high power LEDs of CREE/ NICHIA/ OSRAM/ PHILIPS/ SEOUL make is to be used. LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input frequency 50Hz ±3% power factor >0.95 driver efficiency >85%, THD (I) <10% humidity 10% to 90% RH working temp -20C to 50C. Life | |||
| 184 | 184 | expectancy equal or more than 50000 burning hrs with minimum 70% initial lumens maintained, rendering index >75%. Surge protection shall be min = 5 KV internal and min 10 KV external. Manufactures word mark/Name engraved / embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complained.\na) LED Street light fixture 90 Watt Group-A1 | 6 | Each | |
| 185 | 185 | S&F of Street light bracket made out from following size of \"B\" class GI pipe with heavy duty pole clamp, saddles suitable fastners etc. as required.a) 32 mm dia. | 6 | Mtr. | |
| 186 | 186 | Providing and laying pipe line for water supply in new mandi yard at KUMS - Jaitsar | |||
| 187 | 187 | Part \"A\" : Civil Work | |||
| 188 | 188 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. \na) M20 grade Nominal Mix \n1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | 8 | Cum | |
| 189 | 189 | Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in foundation and plinth with : Cement mortar 1 : 6 (1 cement : 6 coarse sand) | 2 | Cum | |
| 190 | 190 | P & F G.I. Pipes with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : (Internal work ) Medium Duty Pipes : Internal work : | |||
| 191 | 191 | a) Exposed on wall\ni) 15 mm dia nominal bore | 708 | Rmt. | |
| 192 | 192 | ii) 25 mm dia nominal bore | 24 | Rmt. | |
| 193 | 193 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: Brass 400 grm, 15mm nominal bore | 96 | Each | |
| 194 | 194 | Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design : Depth up to 1.5 M. | 6 | Each | |
| 195 | 195 | Part \"B\" : Electric Work | |||
| 196 | 196 | S&F laying following size \"B\" class G.I. pipe confirming to IS : 1239 P-1 (1990) with accessories for laying earth conductor / strip / cable in ground / surface / recess as required : 100mm cia | 24 | Mtr. | |
| 197 | 197 | Supply and fixing of Oil/Air break Starter panel made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON/OFF push buttons, ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors : for three phase submersible/Mono block pump | |||
| 198 | 198 | a) 12.5 H.P. To 17.5 HP (Star / delta) Group-I | 1 | Each | |
| 199 | 199 | b) 3.0 H.P. To 10.0 HP (Star / delta) Group-I | 1 | Each | |
| 200 | 200 | Supplying anf fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat ISI marked complete with nuts, bolts, washers, gaskets, conforming to IS 780 of following sizes as required : 100mm dia | 4 | Each | |
| 201 | 201 | Providing & fixing of HDPE pipe ISI mark (IS : 4984/95) for water supply (suitable for submersible & jet pump) with required fittings : | |||
| 202 | 202 | a) for horizontal installation : \ni) 90 mm OD 6 kg/ cm2\n(Less due to pipe laying through Vernier machine) | 1050 | Mtr. | |
| 203 | 203 | b) for vertical installation : \ni) 63 mm OD 6 kg/ cm2 | 1210 | Mtr. | |
| 204 | 204 | Pipe laid through Vernier machine | 950 | Mtr. | |
| 205 | 205 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required : 4 x 10.0 sqmm Group-I. | 12 | Mtr. | |
| 206 | 206 | SITC of quick make and quick break 3 Pole current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and confirming to IS: 60947-2/ IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability provision for UVR, shunt trip, earth fault trip, push (test) to trip, including making connections with lugs/ spreaders etc. as required with thermal Megantic Realese\na) 160 Amp, 25 kA, Adjustable O/L & fixed S/C setting ics = 100% icu Group-I | 2 | Each | |
| 207 | 207 | Plate Earthing as per IS:3043 with Copper Earth plate of size 600mm x 600mm x 3.0 mm by embodying 3 to 4 mtr. Below the ground level with 20 mm dia, G.I. 'B\" class watering Pipe including all accessories like nut, bolts, reducer , nipple, wire meshed funnel, and brick masonary finished chamber covered with ferro cement cover C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/ charcoal, testing of earth resistance as required. | 2 | Each | |
| 208 | 208 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required : 25 x 3 mm Copper Strip. | 20 | Mtr. | |
| 209 | 209 | S & F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps , fastener as required including cutting the wall and making good the same as required : 25 mm Group-I. | 40 | Mtr. | |
| 210 | 210 | Making connection of G.I. distribution branch with G.I. main including al fitting : Beyond 25 mm & upto 100 mm dia | 8 | Each | |
| 211 | 211 | Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS : 5312 complete with rubber gasket, GI bolts, nuts, wahsers etc. As required : 100mm dia | 2 | Each | |
| 212 | 212 | P/Laying P.V.C. / XLPE insulated & PVC sheathed cable of 1.1 KV grade with aluminium conductor of IS: 1554 P-1 of Group-1 of approved make in ground as per IS:1225 including excavation of 30 cm x 75cm size trench, 25 cm thick under layer of sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size : 35 sqmm 3.5 core (armourned) | 70 | Mtr. | |
| 213 | 213 | S&F of Electrical insulating rubber matts confirming to IS : 15652 / 2006 with one side anti skid abberation marks and pasting the mat with synthetic rubber adhesive as required : \na) 11 KV, 2.5 mm thick with proff voltage 22 KV / 3 min. And Break Down Voltage 45 KV Group-I | 9 | Sqm | |
| 214 | 214 | S&F motor pump set monoblock type ISI marked 3 Phase 440V of suitable rating and required head, and suction delivery size including making connections etc. as required. The motor should be fixed on C.C. platform by means of suitable size of foundation bolts and nuts including the cost of required size C.C. Platform (1:2:4) : 15 H.P. | 1 | Each | |
| 215 | 215 | SITC of cutting back up surface up to 2 Mtr. Depth by digging by bogi including all layers of crust for laying pipe line etc. and making good to original condition (excluding cost of bitumen) | 72 | Mtr. | |
| 216 | 216 | Supplying, fixing, testing commissioning of butterfly valve PN 1.6, with bronze/gunmental seat duly ISI marked complete with nuts, bolts, washers, gaskets, conforming to IS 13095, of following sizes as required. : 100 mm dia | 4 | Each |
AI Tender Summary
Tender Timeline
Mar 23, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedApr 07, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 09, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender