Flood 2018 And 2019 Renovation Of Shutters And Hoisting Mechanisms Of Thrithala Regulator Mechanical Works Supply , Fabrication And Erection Of 1No New Shutter , Bend Removal Of Existing Shutters Deformed In Flood
Tender Value
1.19 Crore
Estimated cost
Bid Submission
13 Apr 2020
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
5520
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thrithala → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Flood 2018 And 2019 Renovation Of Shutters And Hoisting Mechanisms Of Thrithala Regulator Mechanical Works Supply , Fabrication And Erection Of 1No New Shutter , Bend Removal Of Existing Shutters Deformed In Flood
BOQ
| Work Name:Flood 2018 & 2019 - Renovation of shutters and hoisting mechanisms of Thrithala regulator (Mechanical works). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | SUPPLY, FABRICATION,PAINTING and ERECTION of 1 no. new shutter (Shutter no. 22) to replace the shutter washed away in flood and supply of wire rope for 2 nos of shutters damaged in flood | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.01 | REMOVING existing HOISTING BRIDGE as a whole, LIFTING and PLACING of NEW SHUTTER into the groove and REFITTING the EXISTING HOISTING BRIDGE on the pier. | BI01010001010000000000000515BI0100001114 | 1 | set |
| 3 | 1.02 | Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges | BI01010001010000000000000515BI0100001115 | 7174.86 | kg |
| 4 | 1.03 | Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges | BI01010001010000000000000515BI0100001116 | 857.8 | kg |
| 5 | 1.04 | Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied | BI01010001010000000000000515BI0100001117 | 8032.66 | kg |
| 6 | 1.05 | Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350microns over the grit blasted and cleaned surface to class A standard of IS 14177 including cost of all materials , labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc complete as per the direction of departmental officer at site | BI01010001010000000000000515BI0100001118 | 215.327 | sqm |
| 7 | 1.06 | Supplying and fixing cast steel thrust roller assembly having 300mm Dia, 90mm tread width, SS(304) shaft and 22315E self aligning spherical roller bearing and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete | BI01010001010000000000000515BI0100001119 | 8 | no |
| 8 | 1.07 | Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing | BI01010001010000000000000515BI0100001120 | 9 | metre |
| 9 | 1.08 | Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings | BI01010001010000000000000515BI0100001121 | 9.6 | metre |
| 10 | 1.09 | Supplying and stacking of cast steel PULLEY BLOCK with shaft (suitable for wire rope of dia 16mm, 6/36 construction) as per drawings specifications and statutory requirements etc complete but excluding cost of wire rope. | BI01010001010000000000000515BI0100001122 | 1 | set |
| 11 | 1.1 | Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site | BI01010001010000000000000515BI0100001123 | 8278.66 | kg |
| 12 | 1.11 | Cost of supplying and stacking of WIRE ROPE Dia 16mm, 6/36 construction RH lay, 1770 tensile designation, fibre core with minimum breaking strenght 149kN Conforming to IS:2266-2002 | BI01010001010000000000000515BI0100001124 | 330 | metre |
| 13 | 1.12 | APPLYING CARDIUM COMPOUND on WIRE ROPE in sufficient thickness. including cost of all materials, labour etc complete. | BI01010001010000000000000515BI0100001125 | 330 | metre |
| 14 | 2 | Providing temporary platform for painting, changing wire rope and applying cardium compound. including cost of all materials, labours etc. complete | BI01010001010000000000000515BI0100001126 | ||
| 15 | 2.01 | TEMPORARY PLATFORM [40 times usage as life period (assumed) for these materials, hence cost for 1 time used] | BI01010001010000000000000515BI0100001127 | 79 | set |
| 16 | 3 | ARRESTING the vertical lift gate for Hand power tool cleaning, painting, dismantling & fixing the rubber seals .Including cost of all materials, labour, hire charges etc. complete | BI01010001010000000000000515BI0100001128 | ||
| 17 | 3.01 | ARRESTING the vertical lift gate manually at appropriate position for cleaning, painting, changing rubber seal etc. | BI01010001010000000000000515BI0100001129 | 26 | no |
| 18 | 4 | BEND REMOVAL of EXISTING SHUTTERS DEFORMED in FLOOD, Stiffeners STRENGTHENING, providing STRENGTHENING CHANNEL for shutter, Fabrication of replacement of DAMAGED PULLEYS and BEND REMOVAL of damaged GUIDE PLATES, REPAIR of concrete PIER | BI01010001010000000000000515BI0100001130 | ||
| 19 | 4.01 | Supply of MS Universal column to use for bend removal of damaged shutters as a strong back member | BI01010001010000000000000515BI0100001131 | 11 | metre |
| 20 | 4.02 | Use of mobile crane for the lifting and lowering of strong back member for the bend removal of shutters | BI01010001010000000000000515BI0100001132 | 10 | each |
| 21 | 4.03 | BEND REMOVAL of vertical lift gate using RATCHET CHAIN HOIST PULLER after cutting the damaged vertical stiffeners connecting the horizontal girder, welding the cut vertical stiffeners with new ones after the shutter bend is completely removed. | BI01010001010000000000000515BI0100001133 | 10 | each |
| 22 | 4.04 | Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges | BI01010001010000000000000515BI0100001134 | 2953.11 | kg |
| 23 | 4.05 | Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied | BI01010001010000000000000515BI0100001135 | 2953.11 | kg |
| 24 | 4.06 | Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site | BI01010001010000000000000515BI0100001136 | 2953.11 | kg |
| 25 | 4.07 | OVERHAULING BOTTOM BLOCK by cleaning and removal of debris, greasing of shafts and replacement of damaged fasteners and grease nipples so that the pulleys rotate freely. | BI01010001010000000000000515BI0100001137 | 26 | set |
| 26 | 4.08 | Supplying, stacking and Fixing of cast steel PULLEY with shaft (suitable for wire rope of dia 16mm, 6/36 construction) as per drawings specifications and statutory requirements etc complete but excluding cost of wire rope. | BI01010001010000000000000515BI0100001138 | 8 | no |
| 27 | 4.09 | Providing DRAIN HOLES of required diameter. | BI01010001010000000000000515BI0100001139 | 260 | no |
| 28 | 4.1 | TEMPORARY PLATFORM [40 times usage as life period (assumed) for these materials, hence cost for 1 time used] | BI01010001010000000000000515BI0100001140 | 2 | set |
| 29 | 4.11 | BEND REMOVAL of GUIDE PLATE by heating using acetylene torch. | BI01010001010000000000000515BI0100001141 | 2 | no |
| 30 | 4.12 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001142 | 5 | cum |
| 31 | 4.13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001143 | 5 | cum |
| 32 | 5 | SUPPLY, FIXING & COMMISSIONING 25 nos SQUIRREL CAGE INDUCTION MOTOR (equivalent to Kirloskar/Crompton Greeves), COUPLING FLANGE (in between motor & manual operating mechanism) and replacement of 3 nos dog clutch | BI01010001010000000000000515BI0100001144 | ||
| 33 | 5.01 | DISMANTLING and STACKING of Hoist duty type SQUIRREL CAGE INDUCTION MOTOR at convenient place. | BI01010001010000000000000515BI0100001145 | 25 | no |
| 34 | 5.02 | SUPPLY, FIXING and COMMISSIONING of 7.5HP (Hoist duty type) induction motor, 960 rpm F/L foot mounted, Output shaft extends on both sides in correct alignment and proper position. | BI01010001010000000000000515BI0100001146 | 25 | no |
| 35 | 5.03 | SUPPLY and FIXING of DOG CLUTCH assembly with lever. | BI01010001010000000000000515BI0100001147 | 3 | no |
| 36 | 6 | SUPPLY, FABRICATION and ERECTION of HANDRAILS for hoisting bridge and CHECQUERED PLATE for hoisting platform of shutter no. 22 | BI01010001010000000000000515BI0100001148 | ||
| 37 | 6.01 | SUPPLYING & STACKING of Dia 40 mm G.I. PIPE | BI01010001010000000000000515BI0100001149 | 577.8 | metre |
| 38 | 6.02 | SUPPLYING & STACKING of Dia 32 mm G.I. PIPE | BI01010001010000000000000515BI0100001150 | 1155.6 | metre |
| 39 | 6.03 | Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges | BI01010001010000000000000515BI0100001151 | 369.6 | kg |
| 40 | 6.04 | Supply of MS checquered plates including cost of conveyance charges | BI01010001010000000000000515BI0100001152 | 613.441 | kg |
| 41 | 6.05 | Fabrication and supply of Hoisting bridge unit in structural steel confirming to IS2062Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc | BI01010001010000000000000515BI0100001153 | 983.041 | kg |
| 42 | 6.06 | Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied | BI01010001010000000000000515BI0100001154 | 6680.15 | kg |
| 43 | 7 | Supply, fabrication, painting and erection of MS CAGE LADDER for hoisting bridge. | BI01010001010000000000000515BI0100001155 | ||
| 44 | 7.01 | Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges | BI01010001010000000000000515BI0100001156 | 198.881 | kg |
| 45 | 7.02 | Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges | BI01010001010000000000000515BI0100001157 | 34.71 | kg |
| 46 | 7.03 | Supply of MS round bar including cost of conveyance charges | BI01010001010000000000000515BI0100001158 | 36.787 | kg |
| 47 | 7.04 | Fabrication and supply of Hoisting bridge unit in structural steel confirming to IS2062Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc | BI01010001010000000000000515BI0100001159 | 270.378 | kg |
| 48 | 7.05 | Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site | BI01010001010000000000000515BI0100001160 | 8.052 | sqm |
| 49 | 7.06 | Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied | BI01010001010000000000000515BI0100001161 | 270.378 | kg |
| 50 | 8 | DISMANTLING of seal clamp and existing damaged all kind of rubber seal and FIXING L-type rubber seal and Flat type rubber seal with seal clamp in proper position. including cost of all materials, labour etc. complete | BI01010001010000000000000515BI0100001162 | ||
| 51 | 8.01 | DISMANTLING the EXISTING ALL KIND of RUBBER SEAL for VERTICAL LIFT GATE. including cost of all materials, labour, hire charges etc. complete | BI01010001010000000000000515BI0100001163 | 486.6 | metre |
| 52 | 8.02 | Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing | BI01010001010000000000000515BI0100001164 | 234 | metre |
| 53 | 8.03 | Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings | BI01010001010000000000000515BI0100001165 | 252.6 | metre |
| 54 | 8.04 | Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges | BI01010001010000000000000515BI0100001166 | 2248.14 | kg |
| 55 | 8.05 | Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges | BI01010001010000000000000515BI0100001167 | 1469.52 | kg |
| 56 | 8.06 | Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied | BI01010001010000000000000515BI0100001168 | 3717.66 | kg |
| 57 | 9 | PAINTING the VERTICAL LIFT GATE | BI01010001010000000000000515BI0100001169 | ||
| 58 | 9.01 | Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site | BI01010001010000000000000515BI0100001170 | 5692.36 | sqm |
| 59 | 10 | PATCH WORK on HOISTING PLATFORM- replacing missing inspection doors, providing provision for water clogging protection of rope drum covers, replacement of corroded checquered plates and damaged handrail pipes and provision of drain holes. | BI01010001010000000000000515BI0100001171 | ||
| 60 | 10.01 | Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges | BI01010001010000000000000515BI0100001172 | 124.239 | kg |
| 61 | 10.02 | Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges | BI01010001010000000000000515BI0100001173 | 267.45 | kg |
| 62 | 10.03 | Supply of MS checquered plates including cost of conveyance charges | BI01010001010000000000000515BI0100001174 | 1279.2 | kg |
| 63 | 10.04 | BUTT HINGE | BI01010001010000000000000515BI0100001175 | 40 | no |
| 64 | 10.05 | Providing DRAIN HOLES of required diameter. | BI01010001010000000000000515BI0100001176 | 162 | no |
| 65 | 10.06 | PATCH WORK. | BI01010001010000000000000515BI0100001177 | 27 | set |
| 66 | 11 | PAINTING the HOISTING BRIDGE | BI01010001010000000000000515BI0100001178 | ||
| 67 | 11.01 | Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site | BI01010001010000000000000515BI0100001179 | 3905.66 | sqm |
| 68 | 12 | Applying Cardium Compound on wire rope | BI01010001010000000000000515BI0100001180 | ||
| 69 | 12.01 | APPLYING CARDIUM COMPOUND on WIRE ROPE in sufficient thickness. including cost of all materials, labour etc complete. | BI01010001010000000000000515BI0100001181 | 2640 | metre |
AI Tender Summary
Tender Timeline
Mar 21, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedApr 13, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 20, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender