Public Works Department-PWD has published Pump House Dtw Scheme At North Deocherra Under Panisagar Block During The Year 2019-20 Sh Construction Of Pump House , Installation Of Pump Motor In/C Electrical Accessories. Submission Date for this Tender is 16-04-2020. Pump House Construction Tenders in Panisagar Tripura. Bidders can get complete Tender details and download the document.
Name of Work: DTW Scheme at North Deocherra under Panisagar Block during the year 2019-20/SH: Construction of Pump House, Installation of pump motor in/c electrical accessories. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | S.H :- 1-Construction of Pump House\nEarth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil | BI01010001010000000000000515BI0100001101 | 7.375 | Cum |
2 | 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil | BI01010001010000000000000515BI0100001102 | 7.375 | Cum |
3 | 3 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m : \n-All kinds of soil | BI01010001010000000000000515BI0100001103 | 3.814 | Cum |
4 | 4 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.\n | BI01010001010000000000000515BI0100001104 | 2.922 | Cum |
5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering All work upto plinth level: | BI01010001010000000000000515BI0100001105 | ||
6 | 5.01 | a) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size | BI01010001010000000000000515BI0100001106 | 0.888 | Cum |
7 | 5.02 | 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001107 | 2.22 | Cum |
8 | 6 | First class brick work in foundation and plinth including cost of all materials as required complete: | BI01010001010000000000000515BI0100001108 | ||
9 | 6.01 | In cement mortar 1:4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001109 | 7.348 | Cum |
10 | 7 | Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. complete. | BI01010001010000000000000515BI0100001110 | ||
11 | 7.01 | 40 mm thick with 20 mm well burnt brick aggregate | BI01010001010000000000000515BI0100001111 | 22.696 | Sqm |
12 | 8 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level. Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars | BI01010001010000000000000515BI0100001112 | 167.532 | Kg |
13 | 9 | Centering shuttering including struttings, propping etc. and removal of form work for:\n | BI01010001010000000000000515BI0100001113 | ||
14 | 9.01 | a) Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank | BI01010001010000000000000515BI0100001114 | 12.4 | Sqm |
15 | 9.02 | b) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank | BI01010001010000000000000515BI0100001115 | 10 | Sqm |
16 | 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. In plinth and skirting courses, fillets, columns, pillars, posts and struts 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) \n | BI01010001010000000000000515BI0100001116 | 0.775 | Cum |
17 | 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement. RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001117 | 0.938 | Cum |
18 | 12 | 12 mm cement plaster in single layer i/c cost of materials required and finishing even and smooth and curing complete | BI01010001010000000000000515BI0100001118 | 150 | Sqm |
19 | 13 | Neat cement punning | BI01010001010000000000000515BI0100001119 | 50 | Sqm |
20 | 14 | Providing and placing of G.I. pipe over the pump house on top portion of the R.C.C. column as per specification and the direction of the Engineer-in-charge | BI01010001010000000000000515BI0100001120 | 12.2 | Mtr |
21 | 15 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001121 | 1.182 | Cum |
22 | 16 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes | BI01010001010000000000000515BI0100001122 | 261.3 | kg |
23 | 17 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required: Using flats 30x6mm for diagonal braces and central cross piece | BI01010001010000000000000515BI0100001123 | 4.68 | Sqm |
24 | 18 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to steel windows by welding | BI01010001010000000000000515BI0100001124 | 30 | Kg |
25 | 19 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.\n0.63mm thick with zinc coating not less than 275gm/m2 | BI01010001010000000000000515BI0100001125 | 24.75 | Sqm |
26 | 20 | Painting on G.S. sheet with synthetic enamel paint ( two or more coats ) of approved brand and manufacture of required colour to give an even shade on new work including a coat of appropriate steel primer but excluding a coat of mordant solution complete.\n | BI01010001010000000000000515BI0100001126 | 24.75 | Sqm |
27 | 21 | Applying a coat of mordant solution on G.S. sheet on new work complete: With a solution made of 38 gms of copper acetate in litre of soft water.\n | BI01010001010000000000000515BI0100001127 | 24.75 | Sqm |
28 | 22 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001128 | 58.321 | Sqm |
29 | 23 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.43 litre/10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]\n | BI01010001010000000000000515BI0100001129 | 59.896 | Sqm |
30 | 24 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]\n | BI01010001010000000000000515BI0100001130 | 56.746 | Sqm |
31 | 25 | Providing and fixing MS bolts including nuts and washers complete as per standard design: Upto 300mm length. | BI01010001010000000000000515BI0100001131 | 20 | Kg |
32 | 26 | Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]\n | BI01010001010000000000000515BI0100001132 | 10 | Sqm |
33 | 27 | S.H :-2-Istallation of Submersible pump set and electrical panal board\nInstallation of submerssible pump with motor upto the depth of 100 ft by GI pipe ( conforming to IS : 1239 medium class ) with tailpiece as required welded with GI flange in/c providing fitting fixing by necessary rubber washer, nuts & bolts, MS safety clamp etc. as per required size and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run as per direction of the Engineer-incharge (pump, motor with cable will be issued bythe Department at free of cost but G.I. pipe of medium class for column assembly will be supplied by the agency at his cost).\n | BI01010001010000000000000515BI0100001133 | ||
34 | 27.01 | 10000 GPH capacity with 100 mm dia G.I. pipe and 10 mm thick GI flange\n | BI01010001010000000000000515BI0100001134 | 1 | No |
35 | 28 | Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge.\n | BI01010001010000000000000515BI0100001135 | 1 | no |
36 | 29 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge.\n63 amps | BI01010001010000000000000515BI0100001136 | 1 | no |
37 | 30 | Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge.\n25-32 Amps | BI01010001010000000000000515BI0100001137 | 1 | no |
38 | 31 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. 25 HP/18.5 kw Relay range within 13-21 + 10% | BI01010001010000000000000515BI0100001138 | 1 | no |
39 | 32 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge | BI01010001010000000000000515BI0100001139 | 1 | no |
40 | 33 | Providing and fitting fixing of moving iron type, Range 0-100/0200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge | BI01010001010000000000000515BI0100001140 | 1 | no |
41 | 34 | Providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the Engineer-incharge.\n | BI01010001010000000000000515BI0100001141 | 1 | no |
42 | 35 | Providing and fitting fixing heavy duty box type (Resin filled) power factor correction capacitor L & T make etc. complete as per specification and direction of the Engineer-in-charge. i) 5-15 kVAr 440 V | BI01010001010000000000000515BI0100001142 | 1 | each |
43 | 36 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge.\nI) 120 sqmm | BI01010001010000000000000515BI0100001143 | 24 | Mtr |
44 | 37 | Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) ( 12 mm dia perforation ) , laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge.\n | BI01010001010000000000000515BI0100001144 | ||
45 | 37.01 | for 3-phase connection with 4.00 mtr. Long G.I. pipe | BI01010001010000000000000515BI0100001145 | 1 | no |
46 | 38 | Providing and fixing C.I. non-return valve of approved quality as per of CPWD specification and direction of the Engineer - in charge. i)150 mm nominal bore | BI01010001010000000000000515BI0100001146 | 1 | no |
47 | 39 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. i)150 mm dia. APN - 1.6 | BI01010001010000000000000515BI0100001147 | 2 | nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail