| 1 | 1.1 | Maintenance of bituminous surface road. Repair to pot holes by removal of failed material, trimming the sides to vertical and levelling the bottom, cleaning the same with compressed air or any appropriate method, filled with 75 mm B.M, after applying bitumen emulsion prime coat at the bottom and bitumen emulsion tack coat on sides and on bottom as per MoRD technical specification Clauses 1900, 502, 503 and 504. | BI01010001010000000000000515BI0100001113 | 19.8375 | Cum |
|---|
| 2 | 1.2 | Seal Coat \n Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510 A).By Manual Means I) Case - IV : Type D (premix with fine sand) a) Bitumen of VG-30 | BI01010001010000000000000515BI0100001114 | 1915.5 | Sqm |
|---|
| 3 | 1.3 | Tack coat using hot straight run bitumen of grade VG-30 on bituminous surface:- Providing and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On bituminous surface @ 0.50 Kg/ Sqm. | BI01010001010000000000000515BI0100001115 | 1915.5 | Sqm |
|---|
| 4 | 1.4 | 20 mm thick Open-Graded Premix Carpet using Bituminous (viscocity grade/ modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscocity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508 I).Case - I : By Manual Means A) Bitumen of VG-30 | BI01010001010000000000000515BI0100001116 | 1915.5 | Sqm |
|---|
| 5 | 1.5 | Sand seal coat on old bituminous road surface by applying Viscocity Graded (VG-30) bitumen @ 1.00 kg per sqm using rubber brush after proper cleaning of the road surface and spreading of river sand @0.06 cum/10 sqm complete as per specification and direction of the Engg.-in-Charge. | BI01010001010000000000000515BI0100001117 | 8072 | Sqm |
|---|
| 6 | 1.6 | Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] | BI01010001010000000000000515BI0100001118 | 752 | Sqm |
|---|
| 7 | 1.7 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge. | BI01010001010000000000000515BI0100001119 | 1405.08 | Sqm |
|---|
| 8 | 1.8 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.\n(i) Fixed to steel windows by welding. | BI01010001010000000000000515BI0100001120 | 150 | Sqm |
|---|
