| 1 | 1 | Levelling with the objective of creating L-section along the desired\nroute taking levels / bearings with the help of high precise DGPS/GPS instrument at\na spacing of 30m or less keeping variation in levels within 1.0m\nincluding taking levels of Bench Marks, detailing of all existing important\nphysical features (road crossing, culvert, nallah, power line, Bench\nMarks, GLRs, water tanks, other government structures, headworks, trees etc.) 10.0m on either side of the route. Submission of 6 sets of colour prints of digitized drawings of L-section and plan on a vertical scale of 1cm = 1m and horizontal scale of 1cm = 100m by computer plotter and on reproducible medium like CD /floppy , after approval of the draft print, with original field books filled in ink duly, on A1, A2 or A3 size sheets as required by department with standard title block as approved, complete in all respects as per instruction of Engineer in charge and departmental specifications including man, material, equipments, vehicle etc. | BI01010001010000000000000515BI0100001113 | 100 | Km |
|---|
| 2 | 2 | Survey of the premises / area with high precise instruments DGPS/ETS with a view of preparing “Index Plan”indicating surface features like roads, government buildings, tanks, pipe lines, transformers, or any other water supply structures.(GLR, PSPs, Pumping Stations etc.), physical boundary of the area, levels of the important points with respect to some permanent Bench Mark as per direction of Engineer in charge.Submission of 6 sets of color prints of digitized drawings of plan on a scale so as to fit on A2 size sheets as required by department with standard title block as approved, complete in all respect as per instruction of Engineer in charge and departmental specifications including man, material, equipments, vehicle etc.\n | BI01010001010000000000000515BI0100001114 | 3500 | hect. |
|---|
| 3 | 3 | Preparation and drawing of L section and plan of defined section on A-3/A-4 size sheet marking of HGL pipe diameter invert level depth of cutting and specials etc. complete including detailing of existing main etc 1.00 m on either side of route through computer in Auto CAD software with proper layer specification, legend key plan etc. and space of minimum 6 rows below 'L' section and standard title block complete in all respect based on the data collected as per the direction of engineer in charge including providing one draft copy and incorporation of the suggetions /obervation given on draft copy. The out put of final drawing shall be accepted in digitized form in floppy/ CD/ magnetic medium including one set colour print on good quality white paper sheet , L section and plans on a vertical scale of 1 cm = 2 m and horizontal scale 1 cm =100 m. | BI01010001010000000000000515BI0100001115 | 100 | km |
|---|
| 4 | 4 | Preparation of Auto CAD Drawing with complete detail (A2size) as per direction by engineer in charge and colour printing. | | 29 | Each |
|---|
| 5 | 4.01 | (a) Extra printing of the Auto cad drawing A-4 (colour) | | 145 | Each |
|---|
| 6 | 4.02 | (b) Extra printing of the Auto cad drawing A-3 (colour) | | 145 | Each |
|---|
| 7 | 5 | Editing in Auto CAD Drawing with complete detail as per direction by by engineer in charge | | 93 | Each |
|---|
| 8 | 6 | Conducting soil resistivity test upto 3.0 m depth as per IS : 3043 and submitting report in three copies . As per the direction of engineer-in - charge | | 5 | Each |
|---|
| 9 | 7 | Soil Investigation as per methodology mentioned in the latest BIS of Bore Hole / trial pit of approximate 2.0m depth for classifying soil as per requirement of work.\n | | 5 | Each |
|---|
| 10 | 8 | Economical design of rising mains with 5 options | | 42 | Each design |
|---|
| 11 | 9 | Branched network designed work | | | |
|---|
| 12 | 9.01 | up to 05 Pipes | | 350 | per pipe |
|---|
| 13 | 9.02 | up to 10 Pipes | | 410 | per pipe |
|---|
| 14 | 9.03 | above 10 Pipes | | 4190 | per pipe |
|---|
| 15 | 10 | Design of Pumpsets including stand by with suction and delivery pipes (In pump house )And Design of Suction Header and Suction Pipe connected From CWR to Suction Header. | | 42 | P. pump set |
|---|
| 16 | 11 | Design of size and quantity of various pump house mechanical components (sluice / Butterfly / NR valve etc.) | | 42 | P. pump set |
|---|
| 17 | 12 | Prepartion of prepared scheme on power point and ,printing on A-4 size paper by laser printer (one soft cpy of presentation shall be submitted in CD). | | 50 | per slide |
|---|
| 18 | 13 | Typing in M. S. word and printing on A-4 size paper by laser printer \na. Siingle spacing | | 1000 | p. page |
|---|
| 19 | 14 | Tabulation work in M.s. Excel printing on A-4 size paper by laser printer\na. Siingle spacing | | 500 | p. page |
|---|
| 20 | 15 | Editing and printing work in window on A-4 size paper by laser printer | | 100 | p. page |
|---|
| 21 | 16 | Printing work in window on A-4 size paper by laser printer | | 50 | p. page |
|---|
| 22 | 17 | Scaning work for various Documents (Soft copy provided in CD) | | 10000 | per sq Inch |
|---|
| 23 | 18 | Cover page designing with help of G.T Sheet and colour printing on A4 size paper by laser printer (excluding scanning work) | | 30 | p.sheet |
|---|
| 24 | 19 | Prepartion of index map with on G.T sheet /map provided by department and colour printing on A-2 Size paper by Laser printer , As directed by EIC (excluding Scaning work ) | | 30 | p.sheet |
|---|
| 25 | 20 | Photo copy work of scheme | | | |
|---|
| 26 | 20.01 | (a) Black and white printing on A-4 size paper | | 10000 | p. page |
|---|
| 27 | 20.02 | (b) Colour printing on A-4 size paper | | 35 | p. page |
|---|
| 28 | 20.03 | (c) Colour printing on A-3 size paper | | 10 | p. page |
|---|
| 29 | 21 | Spiral binding work of scheme | | | |
|---|
| 30 | 21.01 | (a) Up to 100 pages | | 20 | Each |
|---|
| 31 | 21.02 | (b) Up to 200 pages | | 15 | Each |
|---|
| 32 | 21.03 | (c.) above 200 pages | | 10 | Each |
|---|
| 33 | 22 | Provision for detail survey of existing as well as proposed consumer water connnection with computer mapping and databes for providing FHTCs under JJM. | | 12000 | Per connection |
|---|
