Public Works Department-PWD has published Eor To I . T . I . Mangolpuri , Industrial Area , Phase-I , Delhi . Sh- Construction Of Sbr Black Rubber Flooring Badminton Court , Canteen And Other Related Misc . Works. Submission Date for this Tender is 28-03-2020. Flooring Work Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
| Name of Work: EOR to I.T.I. Mangolpuri, Industrial Area, Phase-I, Delhi. SH: Construction of SBR Black Rubber Flooring Badminton court, Canteen and other related misc. Works | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | |||
| 2 | 1.1 | All kinds of soil. | 32 | cum | |
| 3 | 2 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :\n\nAll kinds of soil | |||
| 4 | 2.1 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | 20 | metre | |
| 5 | 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 5 | cum | |
| 6 | 4 | Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. | |||
| 7 | 4.1 | All kinds of soil | 18 | each | |
| 8 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||
| 9 | 5.1 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size). | 10 | cum | |
| 10 | 5.2 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size). | 15 | cum | |
| 11 | 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). | 2 | cum | |
| 12 | 7 | Centering and shuttering including strutting, propping etc. and removal of form for: | |||
| 13 | 7.1 | Shelves (Cast in situ) | 25 | sqm | |
| 14 | 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. | |||
| 15 | 8.1 | Thermo-Mechanically Treated bars of grade Fe-500 D or more. | 300 | kg | |
| 16 | 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of 1st class in foundation and plinth in: | |||
| 17 | 9.1 | Cement mortar 1:6 (1 cement : 6 coarse sand) | 16 | cum | |
| 18 | 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of 1st class in superstructure above plinth level up to floor V level in all shapes and sizes in : | |||
| 19 | 10.1 | Cement mortar 1:6 (1 cement : 6 coarse sand) | 29 | cum | |
| 20 | 11 | Providing and fixing 16 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.\nRaj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble | |||
| 21 | 11.1 | Area of slab upto 0.50 sqm | 5 | sqm | |
| 22 | 12 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. | 6 | metre | |
| 23 | 13 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. | 1 | each | |
| 24 | 14 | Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.\n8mm thick | |||
| 25 | 14.1 | Granite of any colour and shade | 87 | sqm | |
| 26 | 15 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). | |||
| 27 | 15.1 | 18 mm thick | 50 | sqm | |
| 28 | 15.2 | 25 mm thick | 90 | sqm | |
| 29 | 16 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: | |||
| 30 | 16.1 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 5 | each | |
| 31 | 17 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) | |||
| 32 | 17.1 | On one side only | 5 | sqm | |
| 33 | 18 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | 5 | sqm | |
| 34 | 19 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : | |||
| 35 | 19.1 | 250x10 mm | 5 | each | |
| 36 | 20 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : | |||
| 37 | 20.1 | 300x16x5 mm | 4 | each | |
| 38 | 21 | Providing and fixing bright finished brass handles with screws etc. complete: | |||
| 39 | 21.1 | 125 mm | 12 | each | |
| 40 | 22 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||
| 41 | 22.1 | Hot finished welded type tubes | 2068 | kg | |
| 42 | 23 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | |||
| 43 | 23.1 | In gratings, frames, guard bar, ladder, spikes, bhallas, railings, brackets, gates and similar works | 500 | kg | |
| 44 | 24 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | 850 | kg | |
| 45 | 25 | Providing and fixing Ist quality acrylic ceramic glazed wall tiles of minimum size 300x450mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 102 | sqm | |
| 46 | 26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. | |||
| 47 | 26.1 | Size of Tile 600x600 mm | 102 | sqm | |
| 48 | 27 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 90 | sqm | |
| 49 | 28 | Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge. | 66 | sqm | |
| 50 | 29 | 12 mm cement plaster of mix : | |||
| 51 | 29.1 | 1:6 (1 cement: 6 coarse sand) | 85 | sqm | |
| 52 | 30 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. | |||
| 53 | 30.1 | Two or more coats on new work | 85 | sqm | |
| 54 | 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | |||
| 55 | 31.1 | Two or more coats on new work | 41 | sqm | |
| 56 | 32 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete | 4 | each | |
| 57 | 33 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | |||
| 58 | 33.1 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | 10 | cum | |
| 59 | 34 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 10 | cum | |
| 60 | 35 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: | |||
| 61 | 35.1 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | 2 | each | |
| 62 | 36 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :\nKitchen sink with drain board | |||
| 63 | 36.1 | 510x1040 mm bowl depth 250 mm | 1 | each | |
| 64 | 37 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.\nFlexible pipe | |||
| 65 | 37.1 | 40 mm dia | 3 | each | |
| 66 | 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. | |||
| 67 | 38.1 | 15 mm nominal outer dia Pipes | 10 | metre | |
| 68 | 38.2 | 20 mm nominal outer dia Pipes | 10 | metre | |
| 69 | 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK | |||
| 70 | 39.1 | 25 mm nominal outer dia Pipes | 40 | metre | |
| 71 | 40 | Providing and fixing PTMT bib cock of approved quality and colour. | |||
| 72 | 40.1 | 15 mm nominal bore, 122mm long, weighing not less than 99 gms | 2 | each | |
| 73 | 41 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms | 4 | each | |
| 74 | 42 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : | |||
| 75 | 42.1 | 250 mm dia. R.C.C. Pipe | 20 | metre | |
| 76 | 43 | Providing and fixing aluminium work for doors, windows, ventilators and appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :partitions with extruded built up standard tubular sections/ \n\nFor fixed portion | |||
| 77 | 43.1 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | 1000 | kg | |
| 78 | 43.2 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | |||
| 79 | 43.3 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | 30 | kg | |
| 80 | 44 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | |||
| 81 | 44.1 | With float glass panes of 8 mm thickness | 18 | sqm | |
| 82 | 45 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. | |||
| 83 | 45.1 | Powder coated minimum thickness 50 micron aluminium | 15 | each | |
| 84 | 46 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in- charge | |||
| 85 | 46.1 | Powder coated minimum thickness 50 micron aluminium | 8 | each | |
| 86 | 47 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge. | |||
| 87 | 47.1 | With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. | 64 | sqm | |
| 88 | 48 | Providing Retro-reflective regulatory sign board of required size & shape (Rectangular / circular) made of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. with required colour scheme on the boards & with the high intensity grade A. Back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. | 18 | sqm | |
| 89 | 49 | Providing and fixing Fiber Glass sheet 3mm thick in steel window / ventilators etc. with self tapping screws including racking out old putty, broken glass etc. complete as per direction of Engineer-in-Charge. | 25 | sqm | |
| 90 | 50 | Providing and fixing glass etching with vinyl film in required colours , design, and letters on glass as per the direction of engineer in charge | 18 | sqm | |
| 91 | 51 | Providing and fixing a pair of stainless steel badminton pole as per the direction of Engineer-in-Charge. | 1 | each pair | |
| 92 | 52 | Supply and installation of 6+3mm PU based conipur HG, system consisting of 6mm thick SBR black rubber cast in situ layer and 3mm thick pure polyurethane covered with antiskid mat finish top sealer - BWF & FIBA international federation approved surface for out door badminton court including cleaning preparation the existing surface complete as per manufacturer's specification and direction fo Engineer-in-Charge. | 82 | sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
