| 1 | 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | | | |
|---|
| 2 | 1.1 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size). | | 29 | cum |
|---|
| 3 | 2 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : | | | |
|---|
| 4 | 2.1 | 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | | 11 | cum |
|---|
| 5 | 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of 1st class in superstructure above plinth level up to floor V level in all shapes and sizes in : | | | |
|---|
| 6 | 3.1 | Cement mortar 1:4 (1 cement : 4 coarse sand) | | 5 | cum |
|---|
| 7 | 3.2 | Cement mortar 1:6 (1 cement : 6 coarse sand) | | 51 | cum |
|---|
| 8 | 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of 1st class in superstructure above plinth level up to floor V level. | | | |
|---|
| 9 | 4.1 | Cement mortar 1:4 (1 cement :4 coarse sand) | | 113 | sqm |
|---|
| 10 | 5 | Providing and fixing 16 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.\nGranite of any colour and shade | | | |
|---|
| 11 | 5.1 | Area of slab upto 0.50 sqm | | 4 | sqm |
|---|
| 12 | 5.2 | Area of slab over 0.50 sqm | | 16 | sqm |
|---|
| 13 | 6 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.6 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. | | | |
|---|
| 14 | 6.1 | Granite Stone of approved shade | | 23 | sqm |
|---|
| 15 | 7 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: | | | |
|---|
| 16 | 7.1 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | | 22 | sqm |
|---|
| 17 | 8 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) | | | |
|---|
| 18 | 8.1 | On one side only | | 33 | sqm |
|---|
| 19 | 9 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : | | | |
|---|
| 20 | 9.1 | 150x10 mm | | 12 | each |
|---|
| 21 | 10 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : | | | |
|---|
| 22 | 10.1 | 300x16x5 mm | | 12 | each |
|---|
| 23 | 11 | Providing and fixing bright finished brass handles with screws etc. complete: | | | |
|---|
| 24 | 11.1 | 100 mm | | 24 | each |
|---|
| 25 | 12 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | | 30 | each |
|---|
| 26 | 13 | Providing and fixing to existing door frames. | | | |
|---|
| 27 | 13.1 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | | 51 | sqm |
|---|
| 28 | 14 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | | 1183 | kg |
|---|
| 29 | 15 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | | | |
|---|
| 30 | 15.1 | Hot finished welded type tubes | | 3072 | kg |
|---|
| 31 | 16 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | | 200 | kg |
|---|
| 32 | 17 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : | | | |
|---|
| 33 | 17.1 | 25 mm thick | | 469 | sqm |
|---|
| 34 | 18 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | | 27 | sqm |
|---|
| 35 | 19 | Providing and fixing Ist quality rectified ceramic glazed wall tiles of minimum size 300x450mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | | 1047 | sqm |
|---|
| 36 | 20 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. | | 267 | sqm |
|---|
| 37 | 21 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. | | | |
|---|
| 38 | 21.1 | Size of Tile 600x600 mm | | 370 | sqm |
|---|
| 39 | 22 | Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete :\nRed sand stone slab | | | |
|---|
| 40 | 22.1 | 40 to 50 mm thick | | 72 | sqm |
|---|
| 41 | 23 | 12 mm cement plaster of mix : | | | |
|---|
| 42 | 23.1 | 1:4 (1 cement: 4 coarse sand) | | 13 | sqm |
|---|
| 43 | 24 | Patch repairing of washed stone grit plaster on exterior walls only upper layers, furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 Marble powder : 2 marble chips 10 mm nominal size), in panels including scrubbing and washing the top layer with brushes and water to expose the Marble chips, complete as per specification and direction of Engineer-in- charge (payment for scaffolding shall be made separately). | | 50 | sqm |
|---|
| 44 | 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | | 2826 | sqm |
|---|
| 45 | 26 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. | | | |
|---|
| 46 | 26.1 | With cement mortar 1:4 (1cement: 4 coarse sand) | | 40 | sqm |
|---|
| 47 | 27 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | | 14132 | sqm |
|---|
| 48 | 28 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : | | | |
|---|
| 49 | 28.1 | One or more coats on old work | | 300 | sqm |
|---|
| 50 | 29 | Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. | | | |
|---|
| 51 | 29.1 | One or more coats on old work | | 14132 | sqm |
|---|
| 52 | 30 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. | | 1020 | sqm |
|---|
| 53 | 31 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. | | 24 | each |
|---|
| 54 | 32 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within 50 metres lead as per direction of Engineer- in-Charge. (a) Internal Work - Exposed on wall | | 200 | metre |
|---|
| 55 | 33 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | | | |
|---|
| 56 | 33.1 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) | | 186 | cum |
|---|
| 57 | 34 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | | | |
|---|
| 58 | 34.1 | In cement mortar | | 19 | cum |
|---|
| 59 | 35 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : | | | |
|---|
| 60 | 35.1 | Of area 3 sq. metres and below | | 5 | each |
|---|
| 61 | 36 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. | | | |
|---|
| 62 | 36.1 | For thickness of tiles 10 mm to 25 mm | | 1417 | sqm |
|---|
| 63 | 37 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : | | | |
|---|
| 64 | 37.1 | 100 mm dia pipe | | 180 | metre |
|---|
| 65 | 38 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead and lift upto 10 metre height. | | 1315 | sqm |
|---|
| 66 | 39 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | | 250 | cum |
|---|
| 67 | 40 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. | | 288 | sqm |
|---|
| 68 | 41 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer- in-charge. (Old CC paver blocks shall be supplied by the department free of cost). | | 288 | sqm |
|---|
| 69 | 42 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer- in-Charge. | | | |
|---|
| 70 | 42.1 | 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern. | | 40 | sqm |
|---|
| 71 | 43 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: | | | |
|---|
| 72 | 43.1 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | | 18 | each |
|---|
| 73 | 44 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : | | | |
|---|
| 74 | 44.1 | W.C. pan with ISI marked white solid plastic seat and lid | | 19 | each |
|---|
| 75 | 45 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : | | | |
|---|
| 76 | 45.1 | Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern | | 5 | each |
|---|
| 77 | 45.2 | Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern | | 5 | each |
|---|
| 78 | 46 | Providing and fixing white vitreous counter top china wash basin oval shape (Cat no. 10017 of Hindware/ Parry Ware / Cera or equivlent) with 15mm PTMT pillar cock, 32mm PTMT waste coupling of standard pattern including cutting & making good the walls wherever required.\n(a) Oval shap wash basin size 550 x 400mm with PTMT pillar cock.\n | | 10 | each |
|---|
| 79 | 47 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : | | | |
|---|
| 80 | 47.1 | Size 600x450x200 mm | | 1 | each |
|---|
| 81 | 48 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | | 20 | each |
|---|
| 82 | 49 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer- in-charge. | | 20 | each |
|---|
| 83 | 50 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.\nSemi rigid pipe | | | |
|---|
| 84 | 50.1 | 32 mm dia | | 60 | each |
|---|
| 85 | 51 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | | 36 | each |
|---|
| 86 | 52 | Providing and fixing soil, waste and vent pipes :\n100 mm dia | | | |
|---|
| 87 | 52.1 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 | | 180 | metre |
|---|
| 88 | 53 | Providing and fixing plain bend of required degree.\n100 mm dia | | | |
|---|
| 89 | 53.1 | Sand cast iron S&S as per IS : 3989 | | 72 | each |
|---|
| 90 | 54 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.\n100x100x100 mm | | | |
|---|
| 91 | 54.1 | Sand cast iron S&S as per IS - 3989 | | 72 | each |
|---|
| 92 | 55 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : | | | |
|---|
| 93 | 55.1 | 100 mm | | 198 | each |
|---|
| 94 | 56 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :\n100 mm inlet and 100 mm outlet | | | |
|---|
| 95 | 56.1 | Sand cast iron S&S as per IS: 3989 | | 26 | each |
|---|
| 96 | 57 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : | | | |
|---|
| 97 | 57.1 | 15 mm dia nominal bore | | 108 | metre |
|---|
| 98 | 58 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work | | | |
|---|
| 99 | 58.1 | 40 mm dia nominal bore | | 65 | metre |
|---|
| 100 | 59 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | | | |
|---|
| 101 | 59.1 | Circular tank | | 5000 | per litre |
|---|
| 102 | 60 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. | | | |
|---|
| 103 | 60.1 | 15 mm nominal bore | | 66 | each |
|---|
| 104 | 61 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms | | 144 | each |
|---|
| 105 | 62 | Cutting holes up to 30x30 cm in walls including making good the same: | | | |
|---|
| 106 | 62.1 | With common burnt clay F.P.S. (non modular) bricks | | 13 | each |
|---|
| 107 | 63 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :\nFor fixed portion | | | |
|---|
| 108 | 63.1 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | | 500 | kg |
|---|
| 109 | 63.2 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | | | |
|---|
| 110 | 63.3 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | | 50 | kg |
|---|
| 111 | 64 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. | | | |
|---|
| 112 | 64.1 | Pre-laminated particle board with decorative lamination on both sides | | 26 | sqm |
|---|
| 113 | 65 | Providing glazing in aluminium door, window, ventilator shutters and partitions etc. With float glass panes of 8 mm thickness | | 26 | sqm |
|---|
| 114 | 66 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). | | 21 | sqm |
|---|
| 115 | 67 | Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). | | 670 | kg |
|---|
| 116 | 68 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.\" | | 268 | sqm |
|---|
| 117 | 69 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge. | | | |
|---|
| 118 | 69.1 | With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. | | 429 | sqm |
|---|
| 119 | 70 | Granite work gang saw cut (mirror polished and machine cut) of thickness 16mm for wall lining (non veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the granite shade: Granite of any colour and shade etc. complete as per direction of the Engineer-in-charge. Area of slab over 0.50 sqm. | | 27 | sqm |
|---|
| 120 | 71 | Providing and fixing Fiber Glass sheet 3mm thick in steel window / ventilators etc. with self tapping screws including racking out old putty, broken glass etc. complete as per direction of Engineer-in-Charge. | | 25 | sqm |
|---|
| 121 | 72 | Cleaning / washing of washed stone Grit plaster of ITI Building with hand brushes etc. including applying suitable chemical / soap / acid, use of water jet apparatus thereafter for over all cleaning / washing work complete as per the direction of Engineer in charge (Scaffolding shall be paid separately). | | 2334 | sqm |
|---|
| 122 | 73 | Providing and laying 6mm avg. thick self leveling Epoxy flooring (4 mm epoxy screed + 2mm epoxy self levelling make flow create, force rock, sikka) including leveling, cleaning the bed surface, treating contraction and expansion joints by filling with approved filler, applying primer coat etc. The finished floor display good abrasion resistant and monolithic jointless surface and as per the direction of Engineer-in-Charge. | | 200 | sqm |
|---|
| 123 | 74 | Providing & fixing VISTA or MAC roller sheerdimp outline blinds which have rail made of extruded anodised high strength aluminium alloy and all other components such as control units, runner with tilt control machnism having 180 degree rotation, spacer etc. as per manufacture's specifications. The fabric material however shall be as per manufacture's specifications with scotch guard coating to resist stain and dust. The blinds over lap shall be more than 12 mm. | | 120 | sqm |
|---|
| 124 | 75 | Credit for Dismantled steel work in builtup section, IRC fabric, Pressed steel frame, MS section, MS bar, MS grill, CI, SCI, GI Pipe & M.S. flushing cistern etc. which shall be the property of the contractor and should be removed from the site of work as per direction of Engineer-in-charge (Nothing extra shall be paid on account of carriage). | | 800 | kg |
|---|
