Indian Army-IA has published Supply Of Steel Fabrication Items , Construction And Hardware Stores And Tools For Construction Of Stone Structure . . Submission Date for this Tender is 19-05-2020. Fabrication Work Tenders in Malari (UK) Uttarakhand. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 26-Mar-2020 | Date extension | Date | 18-04-2020 |
2 | 17-Apr-2020 | Date Extension | Date | 09-05-2020 |
3 | 08-May-2020 | date extension | Date | 19-05-2020 |
Name of Work: Supply of Steel Fabrication Items, Construction & Hardware store and Tools for construction of Stone Structures. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Steel Fabrication stores at Malari Loc | |||
2 | 1.01 | SRT 2100MM long 615mm wide, 2mm thick ISI mark hot rolled Carbon Steel Sheets, pre painted with two coats of OG colour over one coat of red oxide. Make: SAIL/TATA/ISPAT/JINDAL with 8 Nos of capsule shaped hole having 10MM dia. | item1 | 222 | Nos |
3 | 1.02 | ISMB 250 (3400 mm long) conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. Make : SAIL/TATA//ISPAT/JINDAL | item2 | 18 | Nos |
4 | 1.03 | ISMB 150 (1500 mm long) \nMake : SAIL/TATA//ISPAT/JINDAL conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. | item3 | 72 | Nos |
5 | 1.04 | ISMB 150 (1200 mm long) \nMake : SAIL/TATA//ISPAT/JINDAL conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. | item4 | 18 | Nos |
6 | 1.05 | Loop holes of size 900 x 600 mm will be provided with purpose made ‘U’ channel frame. A trapezoidal frame as per drawing shall be made of angle iron 50 x 50 x 6 mm,45x45x6mm and flat iron 40 x 6 mm covered with 2mm thick MS sheet form inside on four sides except outer and inner opening as shown in drg with 4 Nos hold fast size 200mm of 50x6mm flat iron two on either side with 02 x MS doors made of 8mm thick MS plate 450x580mm with sliding slit of 75x75mm on one door. The doors should be fixed with required nos of heavy duty box hinges of 10mm size. with the dimension of the outer opening of the loop hole box being 1800 x 600 mm. MS tower bolt 2 Nos 16 mm dia 200 mm long to be provided to shut the doors. the doors should be opening inside with locking arrangement in the from of hook to prevent the door from closing back again whenever required. Edges of the Loop Holes to be chamfered evenly. All steel parts shall be conforming to IS -226 & pre painted with two coats of OG colour over one coat of red oxide. Make : SAIL/TATA//ISPAT/JINDAL brand iron parts to be used for the loophole fabrication. | item5 | 24 | Nos |
7 | 1.06 | Steel door of size 900x1800 mm shall be provided as per drawing. Main frame work shall be of MS angle 50x50x6 mm. MS sheet 2 mm thick shall be provided as cladding of the door with flat iron 25x4 mm bracings including locking arrangements on both sides of the shutters. The door shall be open-able inwards. The door shall have sliding opening 900mm x 250mm made of 14 guage MS sheet with knobs, with 01 Nos 12mm dia guard bar at 1200 mm from bottom. Necessary handles and other fittings will be provided both sides of door. The door frame will have 06 Nos hold fast 200 mm long made of 50x6 mm flat iron. Job No will be engraved on the inner side. Door will be attatched to the frame work with the help of 03 x hinges, fitted with nuts and bolts. Both framework and door will have the flexibility to put hinges on either side of the frame. All steel parts shall be conforming to IS-226 and pre painted with two coats of OG colour over one coat of red oxide. SAIL/TATA/ISPAT/JINDAL brand iron parts to be used for the door fabrication. | item6 | 6 | Nos |
8 | 1.07 | 10 mm dia 150 mm long bolts with nuts & washer Make : SAIL/TATA/ISPAT/ JINDAL with ISI mark for fixing SRT | item7 | 1956 | Nos |
9 | 1.08 | TMT Bar 08 mm dia "confirming IS - 1786 (2008) and Pre cut of size :-\n(i) 5300mm long-16 Nos.\n(ii) 3500mm long-16 Nos\n(iii) 500mm long-188 Nos\nMake:SAIL/TATA/RINL/SRMB/JAY BALAJI/SHYAMSTEEL/ISPAT/JINDAL" | item8 | 240 | Kgs |
10 | 1.09 | Two nos prefabricated shelves shall be embedded in wall of size 900x1700x250 mm. The frame of shelf shall be made using 50x50x6 MS angle, five faces of the shelf will be covered using 2mm thick MS sheets provided with three nos MS Shelves of size 900 mm x 250mm made of 2mm thick MS Sheet. The shelves will have four hold fasts 200mm long made using 50x6mm MS iron. | item9 | 12 | Set |
11 | 2 | Construction and Hardware Stores for Malari Loc | |||
12 | 2.01 | Cement in polythene bags 50 Kgs each grade 43 OPC , IS-8112-1989 Make : GRASIM/ULTRA TECH/AMBUJA/JAY PEE/J K/ ACC | item10 | 600 | Bag |
13 | 2.02 | Quick setting compound in air tight container of 10/01 Ltr each Make : AQUALAC/JK/VIKRAM/CICO/ DUROSEAL/ IMPERIAL | item11 | 480 | Ltrs |
14 | 2.03 | Water proofing compound in packs of 10/01 Kg each confirming to IS-2645-1975. Make : DUROSEAL/ IMPERIAL/ACCO PROOF/CICCO/SIKA | item12 | 231.84 | Kgs |
15 | 2.04 | Lime (Suryacem) | item13 | 18 | Kgs |
16 | 2.05 | PBS Roll IS 1322-62 weight min 46 Kgs per roll and minimum length 20 Mtr with adhesive Make: SHALIMAR/MACEFELT/IWL CHENNAI/NATIONAL | item14 | 42 | Nos |
17 | 2.06 | HDPE Sand bags with thin plastic inner, Length -630mm & Width-350mm & Weight-80 gms minimum, Colour - Sand | item15 | 4650 | Nos |
18 | 2.07 | Jute Sand bags with Length-630mm & Width-350mm & Weight-80 gms minimum, Colour – 50% sand and 50% OG | item16 | 2328 | Nos |
19 | 2.08 | Paint Disruptive OG colour Ist quality in 10/01 Ltr each. Make: ASIAN/SHALIMAR/BERGER/NEROLAC | item17 | 36 | Ltr |
20 | 2.09 | Paint Disruptive Sand colour Ist quality in 10/01 Ltr each. Make: ASIAN/SHALIMAR/BERGER | item18 | 12 | Ltr |
21 | 2.1 | Ms Binding wire 0.9mm dia. Make : SAIL/TATA/ISPAT/ JINDAL | item19 | 12 | Kgs |
22 | 2.11 | Polythene sheet colourless and weight of sheet shall not be less than 50 gm / sqm | item20 | 18 | Kgs |
23 | 2.12 | Polythene sheet black and weight of sheet shall not be less than 70 gm / sqm | item21 | 18 | Kgs |
24 | 2.13 | Lightning conductor (Jelly filled) complete set, Make - RADIANCE/POWERCON/ENNOV/ASHLOK. (1 Set having fwg accessories) (a) Prongs complete set made out of alumn conduct 20mm dia 450mm long with stand/base plate with minimum thread 1"ISI Mark - Set 01, (b) Wooden block size 150x150x120mm - Nos -10, (c) Aluminium strip 25mmx3.15mm wide with fixing screws for roof conductors of ISI Mark- Mtr - 30, (d) Clamp for fixing of aluminium strip with wooden block Nos-40, (e) Chemical earthing electrode inner dia 40mm, length 2000mm, conductor size 25 x 3mm, wt of back fill compound 25 Kg, load bearing capacity 50KVA, Make : RADIANCE/POWERCON Nos-01, (f) CI S cover and pit - Nos-01 | item22 | 6 | Set |
25 | 2.14 | Primer Red Oxide in packs of 10/01 Ltr each as per IS-8982 Make: ASIAN/SHALIMAR/BERGER/NEROLAC | item23 | 18 | Ltr |
26 | 2.15 | Thinner/Turpentine oil branded and supply in air tight container of 10/01 Ltr each Make : ASIAN/BERGER/J&N LTD/ SHALIMAR | item24 | 36 | Ltr |
27 | 2.16 | Hessian Cloth of sand colour, 93cm wide and minimum weight not below 140gm per running meter | item25 | 240 | Mtr |
28 | 2.17 | Bitumen primer as per IS-8982 \nMake : ASIAN/JONSON/ NICHOLSON / STP LTD | item26 | 96 | Ltr |
29 | 2.18 | PVC conduit pipe 20 mm dia Make : Shalimar/dauphin/Presto plast | item27 | 12.78 | RM |
30 | 2.19 | Cover Water Proof 225 sqft Make : SHALIMAR/CENTURY | item28 | 6 | Nos |
31 | 2.2 | Sand Coarse confirming to IS-383-970, 2nd revision, from natural sources | item29 | 44.4 | Cum |
32 | 2.21 | Crushed Stone Aggregate 20 mm graded confirming to IS-383-970, 2nd revision, from natural sources | item30 | 6.9 | Cum |
33 | 3 | Tools for Malari Loc | |||
34 | 3.01 | Crowbar hexagonal 1200mm long X 40mm dia Make: TAPARIA/TATA/JINDAL | item31 | 6 | Nos |
35 | 3.02 | Round nose Shovel hand GS 12” 1.6 Kg with handle. | item32 | 6 | Nos |
36 | 3.03 | Axes Picks 3 Kg head with 02 x addl spare rubber grip handle per Axes Make: TAPARIA/TATA/JINDAL | item33 | 6 | Nos |
37 | 3.04 | Cross and straight peen hammer 500 gm with 02 x addl spare rubber grip handle per hammer | item34 | 6 | Nos |
38 | 3.05 | Sledge hammer 4 Kg with grip handle. | item35 | 6 | Nos |
39 | 3.06 | Ball pane hammer 500 gm with ISI mark, with with 02 x addl spare rubber grip handle ball pane per hammer | item36 | 6 | Nos |
40 | 3.07 | Phawrah 11" x 11.5" x 8.5" , 1.5 Kg with 02 addl handle Make: TAPARIA/TATA/JINDAL | item37 | 6 | Nos |
41 | 3.08 | Pan motor (Tasla) 18” dia | item38 | 6 | Nos |
42 | 3.09 | Trowel Brick 250mm Make: TAPARIA/TATA/JINDAL | item39 | 6 | Nos |
43 | 3.1 | Wooden Gurumala | item40 | 6 | Nos |
44 | 3.11 | Steel Gurumala 152mm with rubber grip Make: TAPARIA/TATA/JINDAL | item41 | 6 | Nos |
45 | 3.12 | Plum bob steel Make: TAPARIA/TATA | item42 | 12 | Nos |
46 | 3.13 | Chiesel Cold 2Kg Make: TAPARIA/TATA/JINDAL | item43 | 6 | Nos |
47 | 3.14 | Scissor of size 300mm long for cutting of PBS roll Make: TATA/SAIL | item44 | 6 | Nos |
48 | 3.15 | Drill Machine Make : Bosch/Taparia / TATA | item45 | 6 | Nos |
49 | 3.16 | Set of bits for drill machine GSR12-2 Professional (consisting of 10 Bits) Make: TAPARIA/Bosch/TATA\n | item46 | 6 | Nos |
50 | 3.17 | Plier side cutting Make : Taparia/Everest/PYE | item47 | 6 | Nos |
51 | 3.18 | Spirit level 10” ( 03 x Axes) | item48 | 6 | Nos |
52 | 3.19 | Hand Gloves Rubber | item49 | 12 | Prs |
53 | 3.2 | Working Gloves | item50 | 12 | Prs |
54 | 3.21 | Working Goggles | item51 | 12 | Nos |
55 | 3.22 | Safety Helmet | item52 | 12 | Nos |
56 | 3.23 | Water level pipe for masonry work | item53 | 24 | RM |
57 | 3.24 | Mason thread 100 Mtr long Roll | item54 | 12 | Roll |
58 | 3.25 | Wire mesh for sieving sand (8’x5’) with 20 runing feet of wood scantling for on site fabrication of mesh frame | item55 | 6 | Nos |
59 | 3.26 | Rope 1" dia (50 mtr) | item56 | 3 | Roll |
60 | 3.27 | Adjustable spanner 10" Make: TAPARIA/ EVEREST/Fischer | item57 | 6 | Nos |
61 | 3.28 | Spanner OJDE 14 x15 mm | item58 | 6 | Nos |
62 | 3.29 | HDPE water tank 500 Ltrs Make : Syntex/SFMC/National Plastic | item59 | 3 | Nos |
63 | 3.3 | Aluminium stud 6' long Make: TAPARIA/TATA/JINDAL | item60 | 6 | Nos |
64 | 3.31 | Measuring tape 5M retractable grade AI-16 \nMake:STANLEY/BELLSTONE | item61 | 6 | Nos |
65 | 3.32 | Measuring tape 30 m Make:STANLEY/BELLSTONE | item62 | 6 | Nos |
66 | 3.33 | Painting brushes 3” size nylon straight Smooth bristles bonded properly and best quality | item63 | 12 | Nos |
67 | 3.34 | Welding Eye shield black | item64 | 6 | Nos |
68 | 3.35 | Solar Lantern with Solar Panel used indoor and outdoor super bright will continuously work for 12-14 hours approx should have following specification:- \n(i) Power Source: Ac/110, 220V, rechargeable battery:6V/4.5Ah sealed lead -acid, \n(ii) Light source:36 pcs super bright led, 108 lumen. \n(iii ) Charging time:7-8 hours approx in the strong sunlight for 3W solar light and 12 hours approx for ac charging adaptor.\n(iv) working time: 12-15 hours after fully charged.\n(v) Material: plastic with protected stainless steel, \n(vi) dimensions: 25.5 cm hight and 13 cm width. | item65 | 3 | Nos |
69 | 3.36 | Portable welding Set 1st Quality ISI Mark Make : Electra/Akira/BMB | item66 | 2 | Nos |
70 | 3.37 | Cutter Machine make Bosch with iron cutter blade, cutter blade and wood cutter blade 05 Nos each Make: Bosch and equivalent make | item67 | 2 | Nos |
71 | 3.38 | Steel cutter blade | item68 | 6 | Nos |
72 | 3.39 | Pouch with tools:- Make : STANLEY/TAPARIA\n(i) Measuring tape 5Mtr - 01Nos\n(ii) Google / Eye shield - 01Nos\n(iii) Carabiner - 01 Nos\n(iv) Ball Peen hammer - 01 Nos\n(v) Screw driver - 02 (01 x Crosshead and 01 x flathead) \n(vi) Cutting Plier - 01Nos \n(vii) Led Torch (2cell) with 4 cell.- 01 Nos | item69 | 1 | Set |
73 | 3.4 | High Head Water Pump (4 Stroke air cooled, horizontal shaft, Single Cylinder Engine) and all other connected fittings complete of ISI mark. Provide operating manual, user hand book and tool kit complete. Pump should have following specifications :-\n\n(i) Discharge – Min 18 Cum/hr at vertical head of 350mtr and 500 mtr at a Min slope of 70 degree.\n(ii) Discharge pressure- 50Kgf/CmSq\n(iii) Suction head-3m\nEngine :- (i) Side valve, 4 stroke, air cooled, horizontal shaft, single cylinder.\n(ii) Petrol start kerosene run.\n(iii) Min horse power-5.5 HP/3600RMP.\n(iv) Displacement – 270 CC.\n(v) Fuel consumption shall not more than 2ltr/hr.\n(vi) Ignition system-contact breaker.\n(vii) Make : ISI marked, Honda GK-300 Model \nDelivery pipe :-\nSize – 10mm OD, Pressure – 200Kg/Sqcm, Pipe should have male female connection at end.\nQty-10 rolls of 100 mtr each\nAccessories/Tools :-\nOil filter make : MICO-01 Nos\nAir filter make : MICO-01 Nos\nScrew driver set complete of ISI mark Make : Taparia-01 Set\nRepair kit :- One standard set per high head water pump will be provided incl 10% reserve. The details must be mentioned in user hand book. | item70 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail