| 1 | 1 | Steel Fabrication stores at Mana and Malari Loc | | | |
|---|
| 2 | 1.01 | SRT 2400MM long 615mm wide, 2mm thick ISI mark hot rolled Carbon Steel Sheets, pre painted with two coats of OG colour over one coat of red oxide. Make : SAIL/TATA//ISPAT/JINDAL with 8 Nos of hole. | item1 | 42 | Nos |
|---|
| 3 | 1.02 | SRT 1800MM long 615mm wide, 2mm thick ISI mark hot rolled Carbon Steel Sheets, pre painted with two coats of OG colour over one coat of red oxide. Make : SAIL/TATA//ISPAT/JINDAL with 8 Nos of hole. | item2 | 24 | Nos |
|---|
| 4 | 1.03 | ISMB 250 (3600 mm long) conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. Make : SAIL/TATA//ISPAT/JINDAL | item3 | 12 | Nos |
|---|
| 5 | 1.04 | ISMB 250 (1800 mm long) : Make SAIL / TATA / ISPAT/ JINDAL conforming to IS-226 shall be pre-painted with two coats of OG paint over a coat of primer | item4 | 6 | Nos |
|---|
| 6 | 1.05 | ISMB 150 (1200 mm long) conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide.Make : SAIL/TATA//ISPAT/JINDAL | item5 | 9 | Nos |
|---|
| 7 | 1.06 | ISMB 150 (1000 mm long) conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. Make : SAIL/TATA//ISPAT/JINDAL | item6 | 45 | Nos |
|---|
| 8 | 1.07 | Loop holes of size 600x200 mm. A trapezoidal frame as per the drawing shall be made of angle iron 50x50x6 mm, 45x45x6 mm and flat iron 40x6 mm covered with 2 mm thick MS sheet from inside on four sides except outer and inner opening with 4 Nos hold fast size 200x50x6 mm flat iron two on either side with 02 x MS doors made of 8 mm thick MS plate 300x480 mm with sliding slit of 75x75 mm on one door. The doors should be fixed with required nos of heavy duty box hinges of 10 mm size. With the dimension of the outer opening of the loop hole box being 900mm x 800mm. MS tower bolt 2 Nos 16 mm dia 200 mm long to be provided to shut the doors. The doors should be opening inside with locking arrangement in the form of hook to prevent the door from closing back again whenever required. Edges of the Loop Holes to be chamfered evenly. All steel parts shall be conforming to IS-226 & pre painted with two coats of OG colour over one coat of red oxide. SAIL/TATA/ISPAT/JINDAL brand iron parts to be used for the loophole fabrication. | item7 | 15 | Nos |
|---|
| 9 | 1.08 | Steel door of size 900x1800 mm shall be provided as per drawing. Main frame work shall be of MS angle 50x50x6 mm. MS sheet 2 mm thick shall be provided as cladding of the door with flat iron 25x4 mm bracings including locking arrangements on both sides of the shutters. The door shall be open-able inwards. The door shall have sliding opening 900mm x 250mm made of 14 guage MS sheet with knobs, with 01 Nos 12mm dia guard bar at 1200 mm from bottom. Necessary handles and other fittings will be provided both sides of door. The door frame will have 06 Nos hold fast 200 mm long made of 50x6 mm flat iron. Job No will be engraved on the inner side. Door will be attatched to the frame work with the help of 03 x hinges, fitted with nuts and bolts. Both framework and door will have the flexibility to put hinges on either side of the frame. All steel parts shall be conforming to IS-226 and pre painted with two coats of OG colour over one coat of red oxide. SAIL/TATA/ISPAT/JINDAL brand iron parts to be used for the door fabrication. | item8 | 3 | Nos |
|---|
| 10 | 1.09 | 10 mm dia 150 mm long bolts with nuts & washer Make : SAIL/TATA//ISPAT/ LLOYD/ JINDAL with ISI mark for fixing SRT | item9 | 582 | Nos |
|---|
| 11 | 1.1 | TMT Bar 08 mm dia \"confirming IS - 1786 (2008) and Pre cut of size :-\n(i) 4100mm long-12 Nos\n(ii) 3130mm long- 24 Nos\n(iii) 2900mm long- 12 Nos\n(iv) 2000mm long - 24 Nos\n(v) 500mm long - 282 Nos Make: SAIL/TATA/RINL/SRMB/JAY BALAJI/SHYAMSTEEL/ISPAT/ LLOYD/JINDAL\" | item10 | 138 | Kgs |
|---|
| 12 | 2 | Construction and Hardware Stores for Mana and Malari Loc | | | |
|---|
| 13 | 2.01 | Cement in polythene bags 50 Kgs each grade 43 OPC , IS-8112-1989 Make : GRASIM/ULTRA TECH/AMBUJA/JAY PEE/J K/ ACC | item11 | 270 | Bag |
|---|
| 14 | 2.02 | Quick setting compound in air tight container of 10/01 Ltr each Make : AQUALAC/JK/VIKRAM/CICO/ DUROSEAL/ IMPERIAL | item12 | 2270 | Ltrs |
|---|
| 15 | 2.03 | Water proofing compound in packs of 10/01 Kg each confirming to IS-2645-1975. Make : DUROSEAL/ IMPERIAL/ACCO PROOF/CICCO/SIKA | item13 | 135 | Kgs |
|---|
| 16 | 2.04 | 20 mm dia PVC conduit with bends. Make : Shalimar/dauphin/Presto Plast | item14 | 9 | RM |
|---|
| 17 | 2.05 | PBS Roll IS 1322-62 weight min 46 Kgs per roll and minimum length 20 Mtr with adhesive Make: SHALIMAR/MACEFELT/IWL CHENNAI/NATIONAL | item15 | 6 | Nos |
|---|
| 18 | 2.06 | HDPE Sand bags with thin plastic inner, Length -630mm & Width-350mm & Weight-80 gms minimum, Colour - Sand | item16 | 1830 | Nos |
|---|
| 19 | 2.07 | Jute Sand bags with Length-630mm & Width-350mm & Weight-80 gms minimum, Colour – 50% sand and 50% OG | item17 | 489 | Nos |
|---|
| 20 | 2.08 | Paint Disruptive OG colour Ist quality in 10/01 Ltr each. Make: ASIAN/SHALIMAR/BERGER/NEROLAC | item18 | 12 | Ltr |
|---|
| 21 | 2.09 | Paint Disruptive Sand colour Ist quality in 10/01 Ltr each. Make: ASIAN/SHALIMAR/BERGER | item19 | 6 | Ltr |
|---|
| 22 | 2.1 | Binding wire 0.9mm dia. Make : SAIL/TATA/ISPAT/ JINDAL | item20 | 6 | Kgs |
|---|
| 23 | 2.11 | Polythene sheet colourless and weight of sheet shall not be less than 50 gm / sqm | item21 | 6 | Kgs |
|---|
| 24 | 2.12 | Polythene sheet black and weight of sheet shall not be less than 70 gm / sqm | item22 | 18 | Kgs |
|---|
| 25 | 2.13 | Lightning conductor (Jelly filled) complete set, Make - RADIANCE/POWERCON/ENNOV/ASHLOK. (1 Set having fwg accessories) (a) Prongs complete set made out of alumn conduct 20mm dia 450mm long with stand/base plate with minimum thread 1\"ISI Mark - Set 01, (b) Wooden block size 150x150x120mm - Nos -10, (c) Aluminium strip 25mmx3.15mm wide with fixing screws for roof conductors of ISI Mark- Mtr - 30, (d) Clamp for fixing of aluminium strip with wooden block Nos-40, (e) Chemical earthing electrode inner dia 40mm, length 2000mm, conductor size 25 x 3mm, wt of back fill compound 25 Kg, load bearing capacity 50KVA, Make : RADIANCE/POWERCON Nos-01, (f) CI S cover and pit - Nos-01 | item23 | 3 | Set |
|---|
| 26 | 2.14 | Primer Red Oxide in packs of 10/01 Ltr each as per IS-8982 Make: ASIAN/SHALIMAR/BERGER/NEROLAC | item24 | 6 | Ltr |
|---|
| 27 | 2.15 | Thinner/Turpentine oil branded and supply in air tight container of 10/01 Ltr each Make : ASIAN/BERGER/J&N LTD/ SHALIMAR | item25 | 6 | Ltr |
|---|
| 28 | 2.16 | Hessian Cloth of sand colour, 93cm wide and minimum weight not below 140gm per running meter | item26 | 240 | Mtr |
|---|
| 29 | 2.17 | Cover Water Proof 225 sqft Make : SHALIMAR/CENTURY | item27 | 3 | Nos |
|---|
| 30 | 2.18 | Sand Coarse confirming to IS-383-970, 2nd revision, from natural sources | item28 | 17.49 | Cum |
|---|
| 31 | 2.19 | Crushed Stone Aggregate 20 mm graded confirming to IS-383-970, 2nd revision, from natural sources | item29 | 2.25 | Cum |
|---|
| 32 | 2.2 | Bitumen primer as per IS-8982 in packs of 10/01 Ltr each Make ASIAN/ JONSON &NICHOLSON/STP LTD | item30 | 15 | Ltr |
|---|
| 33 | 3 | Tools for Mana and Malari Loc | | | |
|---|
| 34 | 3.01 | Crowbar hexagonal 1200mm long x 40mm dia Make:TATA/STAR/ROYAL ENGINEERING | item31 | 3 | Nos |
|---|
| 35 | 3.02 | Round nose Shovel hand GS 12\" 1.6 Kg with handle | item32 | 3 | Nos |
|---|
| 36 | 3.03 | Axes Picks 3 Kg head with 02 handle with rubber grip Make: APARIA/TATA/JINDAL. | item33 | 3 | Nos |
|---|
| 37 | 3.04 | Bucket steel 15 Ltr for clearing sump as per sample approved | item34 | 15 | Nos |
|---|
| 38 | 3.05 | Round nose Phawara 11\"x11.5\"x8.5\" Make : TATA/STAR/ROYAL ENGINEERING | item35 | 3 | Nos |
|---|
| 39 | 3.06 | Pan Motor (Tasla) 18\" dia\nMake:TATA/STAR/ROYAL ENGINEERING\n | item36 | 3 | Nos |
|---|
| 40 | 3.07 | Trawl Brick 250mm Make :TATA/STAR/ROYAL ENGINEERING | item37 | 6 | Nos |
|---|
| 41 | 3.08 | Wooden Gurumala | item38 | 6 | Nos |
|---|
| 42 | 3.09 | Plumb bob steel | item39 | 3 | Nos |
|---|
| 43 | 3.1 | Ball pane Hammer 500gm with ISI Mark \nMake : TATA/STANLEY/TAPARIA\n | item40 | 3 | Nos |
|---|
| 44 | 3.11 | Chisel cold 2 Kg | item41 | 3 | Nos |
|---|
| 45 | 3.12 | Scissor of size 300mm long for cutting of PBS Roll | item42 | 3 | Nos |
|---|
| 46 | 3.13 | Water level pipe for mesonary work | item43 | 17.85 | RM |
|---|
| 47 | 3.14 | Spirit Level 10\" | item44 | 6 | Nos |
|---|
| 48 | 3.15 | Mason thread 100m | item45 | 3 | Roll |
|---|
| 49 | 3.16 | Rope 1\" dia (50 mtr) | item46 | 6 | Roll |
|---|
| 50 | 3.17 | Adjustable spanner 10\" Make:STANLEY\n/TAPARIA | item47 | 6 | Nos |
|---|
| 51 | 3.18 | Spanner OJDE 13x14mm Make:STANLEY/TAPARIA | item48 | 3 | Nos |
|---|
| 52 | 3.19 | Aluminium stud 6' long | item49 | 3 | Nos |
|---|
| 53 | 3.2 | Measuring tape 30 m Make:STANLEY/BELLSTONE | item50 | 6 | Nos |
|---|
| 54 | 3.21 | Measuring tape 5M retractable grade AI-16 \nMake:STANLEY/BELLSTONE | item51 | 3 | Nos |
|---|
| 55 | 3.22 | Painting brushes 3” size nylon straight \nsmooth bristles bonded properly and best quality | item52 | 3 | Nos |
|---|
| 56 | 3.23 | Working Gloves As per sample approved | item53 | 9 | Prs |
|---|
| 57 | 3.24 | Solar Lantern with Solar Panel used indoor and outdoor super bright will continuously work for 12-14 hours approx should have following specification:- \n(i) Power Source: Ac/110, 220V, rechargeable battery:6V/4.5Ah sealed lead -acid, \n(ii) Light source:36 pcs super bright led, 108 lumen. \n(iii ) Charging time:7-8 hours approx in the strong sunlight for 3W solar light and 12 hours approx for ac charging adaptor.\n(iv) working time: 12-15 hours after fully charged.\n(v) Material: plastic with protected stainless steel, \n(vi) dimensions: 25.5 cm hight and 13 cm width. | item54 | 3 | Nos |
|---|
