Indian Army-IA has published Supply Or Steel Fabrication Items , Construction And Hardware Stores And Tools For Construction Of Stone Structure. Submission Date for this Tender is 19-05-2020. Carbon Steel Pipe Tenders in Mana and Malari (UK) Uttarakhand. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 26-Mar-2020 | Date Extension | Date | 18-04-2020 |
2 | 17-Apr-2020 | Date extension | Date | 09-05-2020 |
3 | 08-May-2020 | date extension | Date | 19-05-2020 |
Name of Work: Supply of Steel Fabrication Items, Construction & Hardware store and Tools for construction of Stone Structures. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Steel Fabrication stores at Mana and Malari Loc | |||
2 | 1.01 | SRT 2400mm long 615mm wide, 2mm thick ISI mark hot rolled Carbon Steel Sheets alongwith 08 Nos of capsule shaped hole having 10MM dia and 20MM length Make : SAIL/TATA//ISPAT/ JINDAL pre painted with two coats of OG colour over one coat of red oxide. | item1 | 50 | Nos |
3 | 1.02 | SRT 1800MM long 615mm wide, 2mm thick ISI mark hot rolled Carbon Steel Sheets alongwith 8 Nos of capsule shaped hole having 10MM dia and 20MM length Make : SAIL/TATA/ISPAT/ JINDAL pre painted with two coats of OG colour over one coat of red oxide. | item2 | 170 | Nos |
4 | 1.03 | ISMB 250 (2200 mm long) \nMake : SAIL/TATA//ISPAT/JINDAL conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. | item3 | 25 | Nos |
5 | 1.04 | ISMB 150 (1000 mm long) \nMake : SAIL/TATA//ISPAT/JINDAL conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. | item4 | 45 | Nos |
6 | 1.05 | ISMB 150 (1200 mm long) \nMake : SAIL/TATA//ISPAT/ JINDAL conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. | item5 | 15 | Nos |
7 | 1.06 | Loop holes of size 600x500 mm. A trapezoidal frame as per the drawing shall be made of angle iron 50x50x6 mm, 45x45x6 mm and flat iron 40x6 mm covered with 2 mm thick MS sheet from inside on four sides except outer and inner opening with 4 Nos hold fast size 200x50x6 mm flat iron two on either side with 02 x MS doors made of 8 mm thick MS plate 300x480 mm with sliding slit of 75x75 mm on one door. The doors should be fixed with required nos of heavy duty box hinges of 10 mm size. With the dimension of the outer opening of the loop hole box being 900mm x 800mm. MS tower bolt 2 Nos 16 mm dia 200 mm long to be provided to shut the doors. The doors should be opening inside with locking arrangement in the form of hook to prevent the door from closing back again whenever required. Edges of the Loop Holes to be chamfered evenly. All steel parts shall be conforming to IS-226 & pre painted with two coats of OG colour over one coat of red oxide. SAIL/TATA/ISPAT/JINDAL brand iron parts to be used for the loophole fabrication. | item6 | 15 | Nos |
8 | 1.07 | Steel door of size 900x1800 mm shall be provided as per drawing. Main frame work shall be of MS angle 50x50x6 mm. MS sheet 2 mm thick shall be provided as cladding of the door with flat iron 25x4 mm bracings including locking arrangements on both sides of the shutters. The door shall be open-able inwards. The door shall have sliding opening 900mm x 250mm made of 14 guage MS sheet with knobs, with 01 Nos 12mm dia guard bar at 1200 mm from bottom. Necessary handles and other fittings will be provided both sides of door. The door frame will have 06 Nos hold fast 200 mm long made of 50x6 mm flat iron. Job No will be engraved on the inner side. Door will be attatched to the frame work with the help of 03 x hinges, fitted with nuts and bolts. Both framework and door will have the flexibility to put hinges on either side of the frame. All steel parts shall be conforming to IS-226 and pre painted with two coats of OG colour over one coat of red oxide. SAIL/TATA/ISPAT/JINDAL brand iron parts to be used for the door fabrication. | item7 | 5 | Nos |
9 | 1.08 | 10 mm dia bolts with nut & bitumen washer 150mm long Make : SAIL/TATA//ISPAT/ JINDAL. | item8 | 1935 | Nos |
10 | 1.09 | MS pipe 3" dia 1000 long medium grade welded with 100x100x4mm thik MS plate welded on both side ISI MakISI mark. Make – SAIL/TATA/ISPAT/JINDAL | item9 | 30 | Nos |
11 | 1.1 | MS plate 100mm wide,1250mm long & and 6 mm thick | item10 | 15 | Nos |
12 | 1.11 | Prefabricated frame of size 1250x1250x75mm made using 50mm x 50mm x6mm MS angles and 2 mm thick MS sheets fitted on five sides (Top side open) having 12 Nos of 10 mm dia deformed distribution steel bar (6 Nos on either side) fixed at centre of the frame. | item11 | 15 | Nos |
13 | 1.12 | MS deformed 8 mm dia / TMT Bars Make : SAIL/TATA/RINL / SRMB/JAY BALAJI/SHYAM STEEL/ISPAT/ JINDAL with ISI mark | item12 | 150 | Kgs |
14 | 2 | Construction and Hardware Stores for Mana and Malari Loc | |||
15 | 2.01 | Cement in polythene bags 50 Kgs each grade 43 OPC , IS-8112-1989 Make : GRASIM/ULTRA TECH/AMBUJA/JAY PEE/J K/ ACC | item13 | 500 | Bag |
16 | 2.02 | Sand Coarse (As per Sample) | item14 | 49.25 | Cum |
17 | 2.03 | Crushed Stone Agg 20 mm graded (As per Sample) | item15 | 3.9 | Cum |
18 | 2.04 | Quick setting compound \nMake : AQUALAC/JK/VIKRAM/CICCO | item16 | 400 | Ltr |
19 | 2.05 | Water proofing compound confirming to IS-2645-1975. \nMake : DUROSEAL/IMPERIAL | item17 | 200 | Kgs |
20 | 2.06 | PBS Roll IS 1322-62 weight min 46 Kgs per roll and minimum length 20 Mtr and 1 Mtr wide with adhesive\nMake: SHALIMAR/MACEFELT/IWL CHENNAI/NATIONAL | item18 | 35 | Nos |
21 | 2.07 | HDPE Sand bags with thin plastic inner, Length -630mm & Width-150mm & Weight-80 gms minimum | item19 | 2560 | Nos |
22 | 2.08 | Jute bags length - 630mm & width - 150mm with Sand colour or Green colour. | item20 | 1280 | Nos |
23 | 2.09 | Paint Disruptive OG colour Ist quality. Make: ASIAN/SHALIMAR/BERGER | item21 | 30 | Ltr |
24 | 2.1 | Paint Enamel Destruptive Sand Colour 1st quality \nMake : Asian / Shalimar / Berger | item22 | 10 | Ltr |
25 | 2.11 | Bitumen primer as per IS-8982 \nMake : ASIAN/JONSON/NICHOLSON / STP LTD | item23 | 100 | Ltr |
26 | 2.12 | Primer red oxide as per IS-8982 Make: ASIAN/SHALIMAR/BERGER | item24 | 15 | Ltr |
27 | 2.13 | Thinner/Turpentine oil branded and supply in air tight container Make : Asian/Berger/J&N Ltd/Shalimar | item25 | 30 | Ltr |
28 | 2.14 | Hessian Cloth of sand colour, 93cm wide and minimum weight not below 140gm per running meter | item26 | 200 | Mtr |
29 | 2.15 | Polythene sheet colorless and weight of sheet shall not be less than 50 gm/sqm | item27 | 15 | Kgs |
30 | 2.16 | Polythene sheet black and weight of sheet shall not be less than 70 gm/sqm | item28 | 30 | Kgs |
31 | 2.17 | PVC conduit pipe 20 mm dia Make : Shalimar/dauphin/Prestoplast | item29 | 5 | RM |
32 | 2.18 | Lightening Conductor (jelly filled)complete set Make: Radiance powercon/Ennov/Ashlok (1 Set having fwg accessories) ',(a) Prong complete set made out of alumn conduct 20mm dia 450mm long along with stand/base plate with minimum thread 1"ISI Mark - Set-01, (b) Wooden block size 150x150x120mm - Nos-10 , (c) Aluminium strip 25mm x 3.15mm wide with fixing screws for roof conductors.of ISI Mark- Mtr- 30,(d) Clamp for fixing of aluminium strip with wooden block Nos-40, (e) Chemical earthing electrode inner dia 40mm, lenth 2000mm, conductor size 25 x 3mm, wt of back fill comound 25 Kg, load bearing capacity 50KVA, Make : radiance Powercone Nos-01, (f) CI S cover and pit - Nos-01 | item30 | 5 | Nos |
33 | 2.19 | Cover Water Proof 225 Sqft Make : Shalimar/Century | item31 | 5 | Nos |
34 | 2.2 | MS Binding wire 0.9mm dia. | item32 | 10 | Kgs |
35 | 3 | Tools for Mana and Malari Loc | |||
36 | 3.01 | Crowbar hexagonal 1200mm long X 40mm dia Make: TAPARIA/TATA/JINDAL | item33 | 10 | Nos |
37 | 3.02 | Shovel hand GS 12” 1.6 Kg with handle pointed | item34 | 10 | Nos |
38 | 3.03 | Axes Picks 3 Kg head with 02 x addl spare rubber grip handle per Axes Make: TAPARIA/TATA/JINDAL | item35 | 5 | Nos |
39 | 3.04 | Cross and straight peen hammer 500 gm with 02 x addl spare rubber grip handle per hammer | item36 | 10 | Nos |
40 | 3.05 | Sledge hammer 4 Kg with grip handle. | item37 | 10 | Nos |
41 | 3.06 | Ball pane hammer 500 gm with ISI mark, with with 02 x addl spare rubber grip handle ball pane per hammer | item38 | 10 | Nos |
42 | 3.07 | Phawrah 11" x 11.5" x 8.5" , 1.5 Kg with 02 x addl spare handle Make: TAPARIA/TATA/JINDAL | item39 | 10 | Nos |
43 | 3.08 | Pan motor (Tasla) 18” dia | item40 | 10 | Nos |
44 | 3.09 | Trowel Brick 250mm Make: TAPARIA/TATA/JINDAL | item41 | 10 | Nos |
45 | 3.1 | Wooden Gurumala | item42 | 5 | Nos |
46 | 3.11 | Steel Gurumala 152mm with rubber grip Make: TAPARIA/TATA/JINDAL | item43 | 5 | Nos |
47 | 3.12 | Plum bob steel Make: TAPARIA/TATA | item44 | 5 | Nos |
48 | 3.13 | Chiesel Cold 2Kg Make: TAPARIA/TATA/JINDAL | item45 | 5 | Nos |
49 | 3.14 | Scissor of size 300mm long for cutting of PBS roll Make: TATA/SAIL | item46 | 10 | Nos |
50 | 3.15 | Set of bits for drill machine GSR12-2 Professional \nconsisting of 10 Bits Make: TAPARIA/Bosch/TATA\n | item47 | 5 | Nos |
51 | 3.16 | Plier side cutting Make : Taparia/Everest/PYE | item48 | 10 | Nos |
52 | 3.17 | Spirit level 10” (03 x Axes) | item49 | 5 | Nos |
53 | 3.18 | Hand Gloves Rubber | item50 | 20 | Prs |
54 | 3.19 | Working Gloves | item51 | 20 | Prs |
55 | 3.2 | Working Goggles | item52 | 25 | Nos |
56 | 3.21 | Safety Helmet | item53 | 15 | Nos |
57 | 3.22 | Water level pipe for masonry work | item54 | 27 | RM |
58 | 3.23 | Mason thread 100 Mtr long Roll | item55 | 10 | Roll |
59 | 3.24 | Wire mesh for sieving sand (8’x5’) with 20 runing feet of wood scantling for on site fabrication of mesh frame | item56 | 5 | RM |
60 | 3.25 | Rope 1"dia 50 Mtr Roll (Jute Rope) | item57 | 5 | Roll |
61 | 3.26 | Adjustable spanner 10" Make: TAPARIA/ EVEREST/Fischer | item58 | 5 | Nos |
62 | 3.27 | Spanner OJDE 14 x15 mm | item59 | 5 | Nos |
63 | 3.28 | Aluminium stud 6' long Make: TAPARIA/TATA/JINDAL | item60 | 5 | Nos |
64 | 3.29 | Measuring steel tape 5m long retroctable | item61 | 5 | Nos |
65 | 3.3 | Measuring tape 30 mtr | item62 | 5 | Nos |
66 | 3.31 | Painting brushes 3” size nylon straight Smooth bristles bonded properly and best quality | item63 | 10 | Nos |
67 | 3.32 | Welding Eye shield black | item64 | 5 | Nos |
68 | 3.33 | Solar Lantern with Solar Panel used indoor and outdoor super bright will continuously work for 12-14 hours approx should have following specification:- \n(i) Power Source: Ac/110, 220V, rechargeable battery:6V/4.5Ah sealed lead -acid, \n(ii) Light source:36 pcs super bright led, 108 lumen. \n(iii ) Charging time:7-8 hours approx in the strong sunlight for 3W solar light and 12 hours approx for ac charging adaptor.\n(iv) working time: 12-15 hours after fully charged.\n(v) Material: plastic with protected stainless steel, \n(vi) dimensions: 25.5 cm hight and 13 cm width. | item65 | 5 | Nos |
69 | 3.34 | Portable welding Set 1st Quality ISI Mark Make Electra/ Akira/ BMB | item66 | 1 | Nos |
70 | 3.35 | Cutter Machine make Bosch with iron cutter blade, cutter blade and wood cutter blade 05 Nos each Make: Bosch and equivalent make | item67 | 1 | Nos |
71 | 3.36 | Steel cutter blade | item68 | 5 | Nos |
72 | 3.37 | Pouch with tools:-\n(i) Measuring tape 5Mtr - 01Nos\n(ii) Google / Eye shield - 01 Nos\n(iii) Carabiner - 01 Nos\n(iv) Ball Peen hammer - 01 Nos\n(v) Screw driver - 02 (01 x Crosshead and 01 x flathead) \n(vi) Cutting Plier - 01 Nos \n(vii) Led Torch (2cell) with 4 cell. - 01 Nos | item69 | 1 | Set |
73 | 3.38 | High Head Water Pump (4 Stroke air cooled, horizontal shaft, Single Cylinder Engine) and all other connected fittings complete of ISI mark. Provide operating manual, user hand book and tool kit complete. Pump should have following specifications :-\n(i) Discharge – Min 18 Cum/hr at vertical head of 350mtr and 500 mtr at a Min slope of 70 degree.\n(ii) Discharge pressure- 50Kgf/CmSq\n(iii) Suction head-3m\nEngine :- (i) Side valve, 4 stroke, air cooled, horizontal shaft, single cylinder.\n(ii) Petrol start kerosene run.\n(iii) Min horse power-5.5 HP/3600RMP.\n(iv) Displacement – 270 CC.\n(v) Fuel consumption shall not more than 2ltr/hr.\n(vi) Ignition system-contact breaker.\n(vii) Make : ISI marked, Honda GK-300 Model \nDelivery pipe :-\nSize – 10mm OD, Pressure – 200Kg/Sqcm, Pipe should have male female connection at end.\nQty-10 rolls of 100 mtr each\nAccessories/Tools :-\nOil filter make : MICO-01 Nos\nAir filter make : MICO-01 Nos\nScrew driver set complete of ISI mark Make : Taparia-01 Set\nRepair kit :- One standard set per high head water pump will be provided incl 10% reserve. The details must be mentioned in user hand book. | item70 | 2 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail