Construction Of U Drain And Improvement Of Road At Mettu Street In Thengaithittu . Improvement Of Road
Tender Value
38.71 Lakhs
Estimated cost
Bid Submission
26 Mar 2020
0 days left
EMD
77422
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ariyankuppam → Puducherry
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of U Drain And Improvement Of Road At Mettu Street In Thengaithittu . Improvement Of Road
BOQ
| Name of Work: Construction of \"U\" drain & Improvements of road at Mettu street in Thengaithittu | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil. | BI01010001010000000000000515BI0100001113 | 458 | Cum |
| 2 | 2 | Surface dressing of the ground including \nremoving vegetation and in-equalities not\nexceeding 15cm deep and disposal of\nrubbish, lead upto 50m and lift upto 1.5m -\nAll kinds of soil. | BI01010001010000000000000515BI0100001114 | 473 | Sqm |
| 3 | 3 | Supply of Quary rubbish including stacking to department gauge for premeasurement and spreading required thickness as directed by the Engineer-in-charge | BI01010001010000000000000515BI0100001115 | 60 | Cum |
| 4 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001116 | 10 | Cum |
| 5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001117 | 142 | Cum |
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001118 | 80 | Cum |
| 7 | 7 | Centering shuttering including struttings, propping etc. and removal of form work for foundations, footings , bases for columns.- | BI01010001010000000000000515BI0100001119 | 583 | Sqm |
| 8 | 8 | Steel work welded in built up sections framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works | BI01010001010000000000000515BI0100001120 | 3510 | kg |
| 9 | 9 | 12 mm cement plaster of mix - 1:4 (1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001121 | 1075 | sqm |
| 10 | 10 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry,but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate | BI01010001010000000000000515BI0100001122 | 190 | sqm |
| 11 | 11 | Providing ,hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands , copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | BI01010001010000000000000515BI0100001123 | 10 | Cum |
| 12 | 12 | Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more | BI01010001010000000000000515BI0100001124 | 1200 | Kg |
| 13 | 13 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - 1:3:6 or richer mix. | BI01010001010000000000000515BI0100001125 | 40 | cum |
| 14 | 14 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - 1:4:8 or leaner mix. | BI01010001010000000000000515BI0100001126 | 210 | cum |
| 15 | 15 | Demolishing brick work, manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - In cement mortar. | BI01010001010000000000000515BI0100001127 | 61 | cum |
| 16 | 16 | Demolishing R.C.C. work, including stacking of steel bars and disposal of unserviceable material within 50 metres lead. | BI01010001010000000000000515BI0100001128 | 9 | cum |
| 17 | 17 | Disposal of debries / surplus excavated earth including loading, unloading and conveyance to low lying areas within 2km lead as directed by the Engineer in charge. | BI01010001010000000000000515BI0100001129 | 320 | cum |
| 18 | 18 | Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead 50 metres) including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections. | BI01010001010000000000000515BI0100001130 | 331 | Cum |
| 19 | 19 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth three wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum / gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-I with Gravel screening. (As per MoRTH specification, 4th Revision) | BI01010001010000000000000515BI0100001131 | 124 | Cum |
| 20 | 20 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth 3 wheeld steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum or gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-II with moorum or gravel screening. (As per MoRTH specification, 4th Revision) | BI01010001010000000000000515BI0100001132 | 93 | Cum |
| 21 | 21 | Providing, laying and rolling of built-up spray grout layer over prepared base consisting of a two layer composite construction of compacted crushed coarse aggregates using motor grader for aggregates. Key stone chips spreader may be used with application of bituminous binder after each layer and with key aggregates placed on top of the second layer to serve as a base conforming to the line, grades and cross-section specified, the compacted layer thickness being 75mm. (As per MoRTH specification, 4th Revision) | BI01010001010000000000000515BI0100001133 | 3024 | Sqm |
| 22 | 22 | Cleaning the existing W.B.M. road surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment. As per clause no 502.4.2 and 503.3.1 of MOST specification. | BI01010001010000000000000515BI0100001134 | 1103 | Sqm |
| 23 | 23 | Cleaning of the existing black topped surfaces with brooms, soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment. As per clause no 503.3.1 of MOST specification. | BI01010001010000000000000515BI0100001135 | 1922 | Sqm |
| 24 | 24 | Providing and applying tack coat on the prepared surface, heating bitumen in boiler and spraying the bitumen with sprayset fitted on bitumen boiler - on granular base such as WBM and WMM surfaces not bitumen primed. Rate of application 10kg/10sqm. | BI01010001010000000000000515BI0100001136 | 1103 | Sqm |
| 25 | 25 | Providing and applying tackcoat on the \nprepared surface, heating bitumen in boiler and spraying the bitumen with sprayset fitted on bitumen boiler - on black topped surface bitumen @ 5kg/10sqm. | BI01010001010000000000000515BI0100001137 | 7970 | Sqm |
| 26 | 26 | Providing and laying open graded premix carpet 20mm thick on prepared surface in a single course as wearing course composed of specified size of stone aggregates premix with a bituminous binder in mini hot mix plant 6 to 10 tonne laying manually and rolling with power roller 8 to 10 tonne but excluding cost of primer/tack coat. As per clause no 509 of MOST specification. | BI01010001010000000000000515BI0100001138 | 3024 | Sqm |
| 27 | 27 | Providing and applying liquid seal coat, type `B' comprising of a layer of bituminous binder, followed by a cover of stone chipping of specified grading and rolling with power roller 8 to 10 tonne. As per clause no 513 of MOST specification. | BI01010001010000000000000515BI0100001139 | 3024 | Sqm |
| 28 | 28 | Supplying and filling with gravel (excluding rock) in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller,or wooden or steel rammers,and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes capacity including all leads and lift (payment will be made based on level measurement) | BI01010001010000000000000515BI0100001140 | 331 | Cum |
| 29 | 29 | Fabrication, supply and fixing of Village / Informatory name board of size 1.06mX0.61mts. The width of the board is tapered at 0.80mts upto 1.06mts. to give the triangular shape at one end with High intensity refelective sheeting of required colour encapsulation on aluminium sheet of not less than 2mm thick suitably supported and framed with 25mm X25mm x3mm AISI 316 grade stainless steel angle and the board frame is supported alround with AISI 316 grade stainless steel pipe of 38.10mm dia (Outer dia X 2mm wall thickness). The Village Names / street Names lettering and symbols will be provided by High Intensity grade white sheeting . The board is supported by Two Nos. of 63.5mm dia post S.S pipes for 2.00mts height with same dia dummy plate arrangement at the top. The board frame and post pipes are welded by Tig welding with necessary polishing etc., and M.S. pipe of 50mm dia for a length of 35cm will be welded at the bottom of the posts and fixed in a ground pit of size 0.45X0.45X0.50mts with P.C.C 1:2:4 Rate including all the materials s.s welding Grinding Polishing fabrication charges, conveyance etc. except Earth work and PCC charges etc. complete. | BI01010001010000000000000515BI0100001141 | 5 | Nos |
AI Tender Summary
Tender Timeline
Mar 17, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 26, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 27, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender