Tender For Shifting Of Crusher Substation At Karma Ocp Under Kuju Area .
Tender Value
7.85 Lakhs
Estimated cost
Bid Submission
25 Mar 2020
0 days left
EMD
9900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kuju → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Shifting Of Crusher Substation At Karma Ocp Under Kuju Area .
BOQ
| Name of the Work / Contract No: | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.0 metre and upto 12.0 metre | 10 | nos | |
| 2 | 2 | Supplying and erection of stay set complete (galvanised) with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required. | 8 | nos | |
| 3 | 3 | Supply of 11KV grade GOAB | 1 | nos | |
| 4 | 4 | Supply of DO fuse | 1 | nos | |
| 5 | 5 | Erection cost of GOAB | 1 | nos | |
| 6 | 7 | Limit switch | 1 | nos | |
| 7 | 8 | Terminal | 1 | nos | |
| 8 | 9 | Cost of 2 core 2.5sqmm copper cable | 30 | mtr | |
| 9 | 10 | supplying and erecting earth pit of minimum bore dia. 150mm size , approved make Safe Earthing Electrode consisting Pipe-in-Pipe technology as per IS 3043-1987 made of corrosion free G.I. Pipes with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for effective and maintenance free earthing as mentioned below :With 3 mtr. G.I. Pipes having outer pipe dia of 50mm having 80-200 micron galvanizing, Inner pipe dia. of 25mm having 200-250 Micron galvanizing, connection terminal dia.of 12mm in nominal soil with 50 kg (Two Bag) Back filling Compound | 8 | nos | |
| 10 | 11 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm | 120 | mtr | |
| 11 | 12 | Brick work with common burnt clay modular bricks of class designation7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) | 13.48 | cum | |
| 12 | 13 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. 2.7.1 Ordinary rock . | 108 | cum | |
| 13 | 14 | Supplying, filling, spreading & levelling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. | 54 | cum | |
| 14 | 15 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete | 69.44 | cum | |
| 15 | 16 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick | 78 | sqm | |
| 16 | 17 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 5.3 | cum | |
| 17 | 18 | Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter andabove including binding etc. as required. | 290 | kg | |
| 18 | 19 | Dismantling of pole/ street light standard/ strut embedded incement concrete foundation etc. as required. | 7 | nos | |
| 19 | 20 | Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. | 1 | set | |
| 20 | 21 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required | 13 | nos | |
| 21 | 22 | Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. | 2 | set | |
| 22 | 23 | Supplying and erection of a set of cross bracing FRLSame work for 11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height, complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required | 2 | set | |
| 23 | 24 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. | 15 | nos | |
| 24 | 25 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required | 15 | set | |
| 25 | 26 | supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required. 70 sqmm\n | 4 | Nos | |
| 26 | 27 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required. 70sqmm\n | 2 | nos | |
| 27 | 28 | Supply of GI wire 8 SWG | 50 | kg | |
| 28 | 29 | Fabrication and erecting work of iron and steel platform, column, bracing housting. Placing etc. | 1 | MT | |
| 29 | 30 | Providing corrugated G.S. sheet roofing including vertical / curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8 mm diameterwith bitumen and G.I. limpet washers or with G.I. limpet washers filledwith white lead, including a coat of approved steel primer and two coatsof approved paint on overlapping of sheets complete (up to any pitch inhorizontal/ vertical or curved surfaces), excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.80 mm thick with zinc coating not less than 275 gm/m² | 56.25 | sqm | |
| 30 | 31 | Dismatling of conductor | 290 | kg | |
| 31 | 32 | Painting of pole 10m | 10 | Nos | |
| 32 | 33 | Total impact of GST for the purpose of CTC | 1 | Nos |
AI Tender Summary
Tender Timeline
Mar 16, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedMar 25, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 26, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender