Provision Of Acoustic Paneling And Partitions In Mtrdc Technical Facility , Bangalore, Bangalore-Karnataka

Provision Of Acoustic Paneling And Partitions In Mtrdc Technical Facility , Bangalore , Providing And Fixing Of Acoustic Paneling/Acoustic Treatment To Walls With 50 Mm X 25Mm Thick Size Mdf Frame Work Placed @ 600Mm ( Maximum ) Centre To Centre In Both Vertical And Horizontal Directions Filled With Resin Bonded Fibre Glass Wool Confirming Is:8183 Density 16 Kg/M3 , 50Mm Thick , Wrapped In 200 Gauge Virgin Polythene Bags With The Following Top Surfaces:- , 12 Mm Thick Commercial Plywood Paneling With Ply Of Approved Make With 3 . 5Mm Thick Veneer Duly Melamine Polished . , Fabric Paneling With 9 Mm Thick Voc Free Softboard Cladded With Approved Shade And Design Of Fabric Installed With Imported Gripper System . , 8 Mm Thick Commercial Plywood Paneling With Ply Of Approved Make And With Imported Wall Paper Of M/S Muraco Or Equivalent Brand Of Approved Shade And Design Including Fixing On The Plywood Paneling All Complete As Per Standard Specifications And As Directed . , 12 Mm Thick Commercial Plywood Paneling With Ply Of Approved Make Duly Painted With Duco Paints Of Approved Shade All Complete As Per Standard Specifications And As Directed . , Providing And Fixing Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) Work For Doors , Windows , Ventilators And Partitions With Aluminium Sections Of Approved Make And Of Size 62Mm X 32Mm X 1 . 5Mm Thick With Dash Fasteners Of Required Dia And Size , Including Providing 12 Mm Thick Prelaminated Particle Board ( Confirming To Is:12823 Grade-I Type-Ii ) Of Approved Make With Decorative Lamination On Both Sides Up To A Height Of 1100 Mm From Bottom And Balance With 4Mm Glass Of Panel Height 1000Mm Intermediate Panel And Top With 1100 Mm Including Necessary Filling Up The Gaps At Junctions , I . E . At Top , Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc . Aluminium Sections Shall Be Smooth , Rust Free , Straight , Mitred And Jointed Mechanically Wherever Required Including Cleat Angle , Aluminium Snap Beading For Glazing / Paneling , C . P . Brass / Stainless Steel Screws , All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge . , Providing And Fixing Of 3 M Frosted Film Of Approved Design And Pattern . , Providing And Fixing Of Reception Counter Of 600Mm Deep , And 750/1050Mm Height , Made Out Of 18Mm Thick Mr Grade Plywood Of Approved Make , Cladded With 1Mm Thck Laminate Of Approved Make And Shade On Counter Top @ 750Mm Height , And Internal Surfaces . The Other Areas Are Cladded With 3 . 5Mm Thick Veneer Duly Melamine Polished . The Counter Shall Have Solid Acrylic Surface On Facia @ 1050Mm Height As Shown In The Drawing . The Counter Shall Have One Pedestall Drawer Unit With Laminate Finish .

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	26-03-2020	Extension of Bid submission date	Date	07-04-2020
2	31-03-2020	Extension of Bid Submission Date	Date	22-04-2020

INR 500 /-

INR 98000.0 /-

INR 49 Lakhs /-